From: Jani Nikula <jani.nikula@linux.intel.com>
To: Matt Roper <matthew.d.roper@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Convert hsw_compute_linetime_wm to use in-flight state
Date: Tue, 06 Oct 2015 17:34:22 +0300 [thread overview]
Message-ID: <87twq483rl.fsf@intel.com> (raw)
In-Reply-To: <1443718411-20753-1-git-send-email-matthew.d.roper@intel.com>
[-- Attachment #1: Type: text/plain, Size: 1212 bytes --]
On Thu, 01 Oct 2015, Matt Roper <matthew.d.roper@intel.com> wrote:
> When watermark calculation was moved up to the atomic check phase, the
> code was updated to calculate based on in-flight atomic state rather
> than already-committed state. However the hsw_compute_linetime_wm()
> didn't get updated and continued to pull values out of the
> currently-committed CRTC state. On platforms that call this function
> (HSW/BDW only), this will cause problems when we go to enable the CRTC
> since we'll pull the current mode (off) rather than the mode we're
> calculating for and wind up with a divide by zero error.
>
> This was an oversight in commit:
>
> commit a28170f3389f4e42db95e595b0d86384a79de696
> Author: Matt Roper <matthew.d.roper@intel.com>
> Date: Thu Sep 24 15:53:16 2015 -0700
>
> drm/i915: Calculate ILK-style watermarks during atomic check (v3)
>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Matt, current nightly + "drm/i915: Sanitize watermarks after hardware
state readout" + this still oopses my BDW at boot. dmesg attached.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 67658 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.3.0-rc4-bisect-00536-g400a6b9 (jani@nukke) (gcc version 4.9.2 (Debian 4.9.2-10) ) #86 SMP Wed Oct 7 01:27:22 EEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc4-bisect-00536-g400a6b9 root=UUID=181461f1-6b98-43c3-8984-05f81ca9f77e ro log_buf_len=4M drm.debug=14 quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d132efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d132f000-0x00000000d1809fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d180a000-0x00000000d9324fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9325000-0x00000000d9383fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9384000-0x00000000d93a6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d93a7000-0x00000000d9cd6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9cd7000-0x00000000d9fa2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fa3000-0x00000000d9ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xd938b000 ACPI 2.0=0xd938b000 SMBIOS=0xf05b0 MPS=0xfd640
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff/NUC5i3RYB, BIOS RYBDWi35.86A.0130.2014.1203.1639 12/03/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00D8000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 7 base 021F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xda000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f600000-0x21f7fffff]
[ 0.000000] [mem 0x21f600000-0x21f7fffff] page 2M
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21f5fffff]
[ 0.000000] [mem 0x200000000-0x21f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd132efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd11fffff] page 2M
[ 0.000000] [mem 0xd1200000-0xd132efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd180a000-0xd9324fff]
[ 0.000000] [mem 0xd180a000-0xd19fffff] page 4k
[ 0.000000] [mem 0xd1a00000-0xd91fffff] page 2M
[ 0.000000] [mem 0xd9200000-0xd9324fff] page 4k
[ 0.000000] BRK [0x01b29000, 0x01b29fff] PGTABLE
[ 0.000000] BRK [0x01b2a000, 0x01b2afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] [mem 0xd9fff000-0xd9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] log_buf_len: 4194304 bytes
[ 0.000000] early log buf free: 124928(95%)
[ 0.000000] RAMDISK: [mem 0x37704000-0x37b79fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000D938B000 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000D938B090 00009C (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D939EDA8 00010C (v05 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D938B1B8 013BEA (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000D9CD5F80 000040
[ 0.000000] ACPI: APIC 0x00000000D939EEB8 000084 (v03 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D939EF40 000044 (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D939EF88 00009C (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D939F028 00003C (v01 INTEL NUC5i3RY 00000082 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D939F068 000038 (v01 INTEL NUC5i3RY 00000082 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D939F0A0 000315 (v01 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000D939F3B8 000042 (v01 INTEL NUC5i3RY 00000082 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D939F400 000C7D (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000D93A0080 0000A0 (v32 INTEL NUC5i3RY 00000082 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000D93A0120 000539 (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D93A0660 000B74 (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D93A11D8 005BEF (v02 INTEL NUC5i3RY 00000082 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000D93A6DC8 0000D4 (v01 INTEL NUC5i3RY 00000082 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000D93A6EA0 000038 (v01 INTEL NUC5i3RY 00000082 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21f3f9000-0x21f3fcfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216a00000-ffff88021e9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d132efff]
[ 0.000000] node 0: [mem 0x00000000d180a000-0x00000000d9324fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
[ 0.000000] On node 0 totalpages: 2065896
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13818 pages used for memmap
[ 0.000000] DMA32 zone: 884299 pages, LIFO batch:31
[ 0.000000] Normal zone: 18400 pages used for memmap
[ 0.000000] Normal zone: 1177600 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdb800000-0xdf7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd132f000-0xd1809fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9325000-0xd9383fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9384000-0xd93a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd93a7000-0xd9cd6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9cd7000-0xd9fa2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9fa3000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021f000000 s93848 r8192 d29032 u524288
[ 0.000000] pcpu-alloc: s93848 r8192 d29032 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033589
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc4-bisect-00536-g400a6b9 root=UUID=181461f1-6b98-43c3-8984-05f81ca9f77e ro log_buf_len=4M drm.debug=14 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7968052K/8263584K available (5331K kernel code, 1095K rwdata, 1880K rodata, 1248K init, 844K bss, 295532K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2095.147 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.29 BogoMIPS (lpj=8380588)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20150818
[ 0.018777] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.019590] Security Framework initialized
[ 0.019592] Yama: becoming mindful.
[ 0.019597] AppArmor: AppArmor disabled by boot time parameter
[ 0.020090] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021774] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022524] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022534] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.022747] Initializing cgroup subsys io
[ 0.022752] Initializing cgroup subsys memory
[ 0.022761] Initializing cgroup subsys devices
[ 0.022763] Initializing cgroup subsys freezer
[ 0.022765] Initializing cgroup subsys net_cls
[ 0.022767] Initializing cgroup subsys perf_event
[ 0.022769] Initializing cgroup subsys net_prio
[ 0.022793] CPU: Physical Processor ID: 0
[ 0.022794] CPU: Processor Core ID: 0
[ 0.022798] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022799] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023859] mce: CPU supports 7 MCE banks
[ 0.023872] CPU0: Thermal monitoring enabled (TM1)
[ 0.023880] process: using mwait in idle threads
[ 0.023883] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023884] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024226] Freeing SMP alternatives memory: 20K (ffffffff81a4b000 - ffffffff81a50000)
[ 0.027753] ftrace: allocating 22871 entries in 90 pages
[ 0.037189] DMAR: Host address width 39
[ 0.037191] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.037201] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.037203] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.037207] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.037209] DMAR: RMRR base: 0x000000d9efc000 end: 0x000000d9f0afff
[ 0.037210] DMAR: RMRR base: 0x000000db000000 end: 0x000000df7fffff
[ 0.037211] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.037214] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.037215] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.037216] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.037217] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.037653] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.037654] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.038284] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077994] TSC deadline timer enabled
[ 0.077997] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.078021] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[ 0.078041] ... version: 3
[ 0.078042] ... bit width: 48
[ 0.078043] ... generic registers: 4
[ 0.078044] ... value mask: 0000ffffffffffff
[ 0.078045] ... max period: 0000ffffffffffff
[ 0.078045] ... fixed-purpose events: 3
[ 0.078046] ... event mask: 000000070000000f
[ 0.078534] x86: Booting SMP configuration:
[ 0.078535] .... node #0, CPUs: #1
[ 0.082140] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.082214] #2 #3
[ 0.089502] x86: Booted up 1 node, 4 CPUs
[ 0.089505] smpboot: Total of 4 processors activated (16761.17 BogoMIPS)
[ 0.093277] devtmpfs: initialized
[ 0.095792] PM: Registering ACPI NVS region [mem 0xd93a7000-0xd9cd6fff] (9633792 bytes)
[ 0.096039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096119] pinctrl core: initialized pinctrl subsystem
[ 0.096261] NET: Registered protocol family 16
[ 0.105120] cpuidle: using governor ladder
[ 0.117115] cpuidle: using governor menu
[ 0.117190] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.117191] ACPI: bus type PCI registered
[ 0.117193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.117249] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.117251] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.117259] PCI: Using configuration type 1 for base access
[ 0.129433] ACPI: Added _OSI(Module Device)
[ 0.129435] ACPI: Added _OSI(Processor Device)
[ 0.129436] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.129437] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134660] ACPI: Executed 18 blocks of module-level executable AML code
[ 0.139585] ACPI: Dynamic OEM Table Load:
[ 0.139591] ACPI: SSDT 0xFFFF880214CC4C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.140397] ACPI: Dynamic OEM Table Load:
[ 0.140402] ACPI: SSDT 0xFFFF880214CA6800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.141282] ACPI: Dynamic OEM Table Load:
[ 0.141285] ACPI: SSDT 0xFFFF880214CCFC00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.142862] ACPI: Interpreter enabled
[ 0.142871] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
[ 0.142878] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.142894] ACPI: (supports S0 S3 S4 S5)
[ 0.142895] ACPI: Using IOAPIC for interrupt routing
[ 0.142927] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.145165] ACPI: Power Resource [PG00] (on)
[ 0.145588] ACPI: Power Resource [PG01] (on)
[ 0.145998] ACPI: Power Resource [PG02] (on)
[ 0.156885] ACPI: Power Resource [FN00] (off)
[ 0.156966] ACPI: Power Resource [FN01] (off)
[ 0.157046] ACPI: Power Resource [FN02] (off)
[ 0.157123] ACPI: Power Resource [FN03] (off)
[ 0.157207] ACPI: Power Resource [FN04] (off)
[ 0.158250] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.158256] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.158383] \_SB_.PCI0:_OSC invalid UUID
[ 0.158384] _OSC request data:1 1f 0
[ 0.158388] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.158888] PCI host bridge to bus 0000:00
[ 0.158891] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.158893] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.158894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.158896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.158898] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
[ 0.158905] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.159005] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.159020] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.159026] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.159031] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.159119] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.159132] pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit]
[ 0.159237] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.159261] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.159309] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.159365] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.159405] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.159433] pci 0000:00:16.0: reg 0x10: [mem 0xf713d000-0xf713d01f 64bit]
[ 0.159488] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.159595] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
[ 0.159617] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.159625] pci 0000:00:19.0: reg 0x14: [mem 0xf713b000-0xf713bfff]
[ 0.159632] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.159675] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.159730] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.159768] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.159789] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.159828] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.159893] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.159937] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.160001] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.160084] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.160129] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.160198] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.160280] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.160323] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.160350] pci 0000:00:1d.0: reg 0x10: [mem 0xf713a000-0xf713a3ff]
[ 0.160419] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.160476] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.160517] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.160696] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.160715] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.160722] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.160729] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.160736] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.160742] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.160749] pci 0000:00:1f.2: reg 0x24: [mem 0xf7139000-0xf71397ff]
[ 0.160774] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.160851] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.160866] pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit]
[ 0.160885] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.161064] acpiphp: Slot [1] registered
[ 0.161076] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161376] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.161483] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.161709] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.161818] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.169474] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.169480] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.170367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.170422] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.170476] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.170528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.170581] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.170633] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.170685] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.170737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171077] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.171178] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.171180] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171182] vgaarb: loaded
[ 0.171184] vgaarb: bridge control possible 0000:00:02.0
[ 0.171287] PCI: Using ACPI for IRQ routing
[ 0.172589] PCI: pci_cache_line_size set to 64 bytes
[ 0.172909] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.172910] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.172911] e820: reserve RAM buffer [mem 0xd132f000-0xd3ffffff]
[ 0.172912] e820: reserve RAM buffer [mem 0xd9325000-0xdbffffff]
[ 0.172914] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.172915] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
[ 0.173059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.173064] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.175090] clocksource: Switched to clocksource hpet
[ 0.180244] pnp: PnP ACPI init
[ 0.180420] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.180424] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180669] pnp 00:01: [dma 0 disabled]
[ 0.180701] pnp 00:01: Plug and Play ACPI device, IDs NTN0530 (active)
[ 0.180789] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.180791] system 00:02: [io 0xffff] has been reserved
[ 0.180793] system 00:02: [io 0xffff] has been reserved
[ 0.180795] system 00:02: [io 0xffff] has been reserved
[ 0.180797] system 00:02: [io 0x1800-0x18fe] could not be reserved
[ 0.180799] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.180801] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180843] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.180880] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.180882] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.181080] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.181082] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.181084] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.181086] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.181089] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.181091] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.181093] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.181095] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.181097] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.181099] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.181102] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.181104] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.181106] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181693] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.181695] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.181697] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.181699] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.181701] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.181703] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.181706] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182226] pnp: PnP ACPI: found 7 devices
[ 0.188488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.188517] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.188530] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.188535] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.188543] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.188545] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.188546] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.188548] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window]
[ 0.188550] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.188607] NET: Registered protocol family 2
[ 0.188768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.188906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.189028] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.189053] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.189080] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.189155] NET: Registered protocol family 1
[ 0.189171] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.207292] PCI: CLS 64 bytes, default 64
[ 0.207335] Unpacking initramfs...
[ 0.292828] Freeing initrd memory: 4568K (ffff880037704000 - ffff880037b7a000)
[ 0.292850] DMAR: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
[ 0.292859] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.292861] software IO TLB [mem 0xc9821000-0xcd821000] (64MB) mapped at [ffff8800c9821000-ffff8800cd820fff]
[ 0.292920] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.292922] hw unit of domain pp0-core 2^-14 Joules
[ 0.292923] hw unit of domain package 2^-14 Joules
[ 0.292924] hw unit of domain dram 2^-14 Joules
[ 0.292924] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.293040] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293049] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293056] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293064] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x16
[ 0.293115] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.293173] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x1fa4000 bytes, mapped to 0xffffc90002000000
[ 0.293175] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=3840x2160x32, linelength=15360
[ 0.310965] Console: switching to colour frame buffer device 480x135
[ 0.328585] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.328833] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.328866] audit: initializing netlink subsys (disabled)
[ 0.328882] audit: type=2000 audit(1444170630.320:1): initialized
[ 0.329299] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.329318] zbud: loaded
[ 0.329459] VFS: Disk quotas dquot_6.6.0
[ 0.329478] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.329905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.329935] io scheduler noop registered
[ 0.329938] io scheduler deadline registered
[ 0.329952] io scheduler cfq registered (default)
[ 0.330294] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.330301] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.330324] intel_idle: MWAIT substates: 0x11142120
[ 0.330325] intel_idle: v0.4 model 0x3D
[ 0.330326] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.330592] GHES: HEST is not enabled!
[ 0.330655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.351165] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.351618] Linux agpgart interface v0.103
[ 0.351668] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.351669] AMD IOMMUv2 functionality not available on this system
[ 0.352021] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.355118] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.355122] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.355239] mousedev: PS/2 mouse device common for all mice
[ 0.355294] rtc_cmos 00:03: RTC can wake from S4
[ 0.355429] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.355458] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.355470] Intel P-state driver initializing.
[ 0.355601] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.357003] NET: Registered protocol family 10
[ 0.357401] mip6: Mobile IPv6
[ 0.357423] NET: Registered protocol family 17
[ 0.358154] registered taskstats version 1
[ 0.358201] zswap: loaded using pool lzo/zbud
[ 0.359289] console [netcon0] enabled
[ 0.359295] netconsole: network logging started
[ 0.359360] rtc_cmos 00:03: setting system clock to 2015-10-06 22:30:30 UTC (1444170630)
[ 0.359572] PM: Hibernation image not present or could not be loaded.
[ 0.360227] Freeing unused kernel memory: 1248K (ffffffff81913000 - ffffffff81a4b000)
[ 0.360230] Write protecting the kernel read-only data: 8192k
[ 0.360952] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.361111] Freeing unused kernel memory: 168K (ffff8800017d6000 - ffff880001800000)
[ 0.372213] systemd-udevd[75]: starting version 215
[ 0.372480] random: systemd-udevd urandom read with 5 bits of entropy available
[ 0.382953] sdhci: Secure Digital Host Controller Interface driver
[ 0.382956] sdhci: Copyright(c) Pierre Ossman
[ 0.382991] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.392549] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.392552] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.393143] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.393147] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.394510] ACPI: bus type USB registered
[ 0.394533] usbcore: registered new interface driver usbfs
[ 0.394542] usbcore: registered new interface driver hub
[ 0.394566] usbcore: registered new device driver usb
[ 0.395068] pps_core: LinuxPPS API ver. 1 registered
[ 0.395071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.395428] PTP clock support registered
[ 0.395622] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.395628] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.395714] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.395719] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.395900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.395902] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.395904] usb usb1: Product: xHCI Host Controller
[ 0.395905] usb usb1: Manufacturer: Linux 4.3.0-rc4-bisect-00536-g400a6b9 xhci-hcd
[ 0.395906] usb usb1: SerialNumber: 0000:00:14.0
[ 0.396038] hub 1-0:1.0: USB hub found
[ 0.396051] hub 1-0:1.0: 11 ports detected
[ 0.396297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.396514] ehci-pci: EHCI PCI platform driver
[ 0.396527] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.396529] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.400000] SCSI subsystem initialized
[ 0.401731] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.401739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.401789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.401792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.401794] usb usb2: Product: xHCI Host Controller
[ 0.401797] usb usb2: Manufacturer: Linux 4.3.0-rc4-bisect-00536-g400a6b9 xhci-hcd
[ 0.401799] usb usb2: SerialNumber: 0000:00:14.0
[ 0.401928] libata version 3.00 loaded.
[ 0.401964] hub 2-0:1.0: USB hub found
[ 0.401977] hub 2-0:1.0: 4 ports detected
[ 0.404210] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.404218] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.404233] ehci-pci 0000:00:1d.0: debug port 2
[ 0.408133] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.408393] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf713a000
[ 0.419276] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.419333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.419335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.419337] usb usb3: Product: EHCI Host Controller
[ 0.419339] usb usb3: Manufacturer: Linux 4.3.0-rc4-bisect-00536-g400a6b9 ehci_hcd
[ 0.419340] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.419551] hub 3-0:1.0: USB hub found
[ 0.419557] hub 3-0:1.0: 2 ports detected
[ 0.419888] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.590451] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.590454] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:72:2e:00
[ 0.590456] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.590482] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.590617] ahci 0000:00:1f.2: version 3.0
[ 0.603416] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.603420] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.603963] scsi host0: ahci
[ 0.604087] scsi host1: ahci
[ 0.604245] scsi host2: ahci
[ 0.604350] scsi host3: ahci
[ 0.604412] ata1: SATA max UDMA/133 abar m2048@0xf7139000 port 0xf7139100 irq 44
[ 0.604414] ata2: DUMMY
[ 0.604416] ata3: DUMMY
[ 0.604417] ata4: DUMMY
[ 0.711413] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 0.731422] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.845865] usb 1-1: New USB device found, idVendor=04b3, idProduct=3025
[ 0.845868] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.845870] usb 1-1: Product: USB NetVista Full Width Keyboard.
[ 0.845871] usb 1-1: Manufacturer: LITE-ON Technology
[ 0.846030] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[ 0.851404] usbcore: registered new interface driver usbhid
[ 0.851406] usbhid: USB HID core driver
[ 0.851876] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04B3:3025.0001/input/input2
[ 0.863828] usb 3-1: New USB device found, idVendor=8087, idProduct=8001
[ 0.863831] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.864112] hub 3-1:1.0: USB hub found
[ 0.864174] hub 3-1:1.0: 8 ports detected
[ 0.907676] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-1/input0
[ 0.923535] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.926506] ata1.00: ATA-10: INTEL SSDSC2BW240H6, RG20, max UDMA/133
[ 0.926509] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.939850] ata1.00: configured for UDMA/133
[ 0.940114] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 RG20 PQ: 0 ANSI: 5
[ 0.941859] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 0.941950] sd 0:0:0:0: [sda] Write Protect is off
[ 0.941953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.941975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.942909] sda: sda1 sda2 sda3
[ 0.943197] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.943635] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.964000] PM: Starting manual resume from disk
[ 0.964005] PM: Hibernation image partition 8:3 present
[ 0.964006] PM: Looking for hibernation image.
[ 0.964159] PM: Image not found (code -22)
[ 0.964161] PM: Hibernation image not present or could not be loaded.
[ 1.000364] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.015552] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 1.084367] fuse init (API version 7.23)
[ 1.100774] systemd-udevd[182]: starting version 215
[ 1.158381] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.158388] ACPI: Sleep Button [SLPB]
[ 1.158459] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.158463] ACPI: Power Button [PWRB]
[ 1.158562] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.158565] ACPI: Power Button [PWRF]
[ 1.172872] nuvoton-cir 00:01: IR PNP Port not valid!
[ 1.173185] nuvoton-cir 00:01: disabled
[ 1.189305] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 1.193907] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254)
[ 1.193916] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.194322] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.194817] EFI Variables Facility v0.08 2004-May-17
[ 1.203273] [drm] Initialized drm 1.1.0 20060810
[ 1.209042] usb 1-2: New USB device found, idVendor=046d, idProduct=c52a
[ 1.209048] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.209051] usb 1-2: Product: 2.4GHz Cordless Desktop
[ 1.209053] usb 1-2: Manufacturer: Logitech
[ 1.209168] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.209174] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.210091] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.214270] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52A.0002/input/input9
[ 1.214295] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 1.214688] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 1.226143] AVX2 version of gcm_enc/dec engaged.
[ 1.226146] AES CTR mode by8 optimization enabled
[ 1.226445] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[ 1.226472] [drm:intel_detect_pch] Found LynxPoint LP PCH
[ 1.226546] [drm] Memory usable by graphics device = 4096M
[ 1.226549] [drm:i915_gem_gtt_init] GMADR size = 256M
[ 1.226551] [drm:i915_gem_gtt_init] GTT stolen size = 64M
[ 1.226553] [drm:i915_gem_gtt_init] ppgtt mode: 2
[ 1.226556] checking generic (e0000000 1fa4000) vs hw (e0000000 10000000)
[ 1.226557] fb: switching to inteldrmfb from simple
[ 1.226615] Console: switching to colour dummy device 80x25
[ 1.226856] [drm] Replacing VGA console driver
[ 1.227177] [drm:intel_opregion_setup] graphic opregion physical addr: 0xd9cd0018
[ 1.227187] [drm:intel_opregion_setup] Public ACPI methods supported
[ 1.227189] [drm:intel_opregion_setup] SWSCI supported
[ 1.227650] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 1.227655] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.227658] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.227660] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 1.227662] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 1.227664] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 1.234367] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
[ 1.234371] [drm:intel_opregion_setup] ASLE supported
[ 1.234634] [drm:intel_device_info_runtime_init] slice total: 1
[ 1.234637] [drm:intel_device_info_runtime_init] subslice total: 3
[ 1.234639] [drm:intel_device_info_runtime_init] subslice per slice: 3
[ 1.234640] [drm:intel_device_info_runtime_init] EU total: 24
[ 1.234642] [drm:intel_device_info_runtime_init] EU per subslice: 8
[ 1.234644] [drm:intel_device_info_runtime_init] has slice power gating: n
[ 1.234646] [drm:intel_device_info_runtime_init] has subslice power gating: n
[ 1.234647] [drm:intel_device_info_runtime_init] has EU power gating: n
[ 1.234649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.234651] [drm] Driver supports precise vblank timestamp query.
[ 1.234654] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[ 1.234657] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d
[ 1.234660] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.234662] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[ 1.234665] [drm:parse_lfp_panel_data] DRRS supported mode is static
[ 1.234668] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[ 1.234672] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.234674] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
[ 1.234676] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
[ 1.234679] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[ 1.234683] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.234685] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[ 1.234687] [drm:parse_driver_features] DRRS State Enabled:1
[ 1.234691] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[ 1.234693] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
[ 1.234695] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.234697] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6
[ 1.234699] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.234701] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6
[ 1.234712] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[ 1.234720] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
[ 1.234723] [drm:intel_power_well_enable] enabling always-on
[ 1.234725] [drm:intel_power_well_enable] enabling display
[ 1.234813] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[ 1.234815] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
[ 1.234817] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
[ 1.234819] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
[ 1.234822] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[ 1.234824] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[ 1.234826] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
[ 1.234827] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
[ 1.234829] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
[ 1.234831] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[ 1.234833] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[ 1.234834] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
[ 1.234836] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
[ 1.234838] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
[ 1.234840] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[ 1.234843] [drm:intel_modeset_init] 3 display pipes available.
[ 1.234863] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
[ 1.234865] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
[ 1.234866] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz
[ 1.234872] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.235242] [drm:intel_dp_init_connector] Adding DP connector on port C
[ 1.235278] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[ 1.241429] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled
[ 1.241433] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
[ 1.241435] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
[ 1.241437] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 1.241439] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 1.241442] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
[ 1.241447] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A
[ 1.241450] [drm:intel_modeset_readout_hw_state] [ENCODER:38:DP MST-38] hw state readout: disabled, pipe A
[ 1.241452] [drm:intel_modeset_readout_hw_state] [ENCODER:39:DP MST-39] hw state readout: disabled, pipe B
[ 1.241454] [drm:intel_modeset_readout_hw_state] [ENCODER:40:DP MST-40] hw state readout: disabled, pipe C
[ 1.241457] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled
[ 1.241461] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-1] hw state readout: enabled
[ 1.241464] [drm:intel_modeset_readout_hw_state] [CONNECTOR:41:HDMI-A-2] hw state readout: disabled
[ 1.241482] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff8802145c5000 for pipe A
[ 1.241484] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 1.241486] [drm:intel_dump_pipe_config] pipe bpp: 30, dithering: 0
[ 1.241488] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241491] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 7653148, gmch_n: 8388608, link_m: 510209, link_n: 524288, tu: 64
[ 1.241494] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.241496] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.241497] [drm:intel_dump_pipe_config] requested mode:
[ 1.241501] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 30 262749 3840 3888 3920 4000 2160 2163 2168 2191 0x40 0x9
[ 1.241503] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.241506] [drm:drm_mode_debug_printmodeline] Modeline 0:"3840x2160" 30 262749 3840 3888 3920 4000 2160 2163 2168 2191 0x40 0x9
[ 1.241509] [drm:intel_dump_crtc_timings] crtc timings: 262749 3840 3888 3920 4000 2160 2163 2168 2191, type: 0x40 flags: 0x9
[ 1.241511] [drm:intel_dump_pipe_config] port clock: 270000
[ 1.241513] [drm:intel_dump_pipe_config] pipe src size: 3840x2160
[ 1.241515] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.241517] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241519] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x0f000870, enabled
[ 1.241521] [drm:intel_dump_pipe_config] ips: 0
[ 1.241522] [drm:intel_dump_pipe_config] double wide: 0
[ 1.241524] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0
[ 1.241526] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.241528] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
[ 1.241531] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[ 1.241533] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 1.241537] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff880213a72000 for pipe B
[ 1.241539] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 1.241540] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 1.241543] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241545] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241547] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.241549] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.241550] [drm:intel_dump_pipe_config] requested mode:
[ 1.241553] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241555] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.241558] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241561] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.241563] [drm:intel_dump_pipe_config] port clock: 0
[ 1.241564] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 1.241566] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.241568] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241571] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.241572] [drm:intel_dump_pipe_config] ips: 0
[ 1.241574] [drm:intel_dump_pipe_config] double wide: 0
[ 1.241576] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[ 1.241577] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.241580] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
[ 1.241582] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
[ 1.241584] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
[ 1.241588] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff880213a6c000 for pipe C
[ 1.241589] [drm:intel_dump_pipe_config] cpu_transcoder: C
[ 1.241591] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 1.241593] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241596] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241598] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.241600] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.241601] [drm:intel_dump_pipe_config] requested mode:
[ 1.241604] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241605] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.241608] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241611] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.241612] [drm:intel_dump_pipe_config] port clock: 0
[ 1.241614] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 1.241616] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.241618] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241620] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.241622] [drm:intel_dump_pipe_config] ips: 0
[ 1.241623] [drm:intel_dump_pipe_config] double wide: 0
[ 1.241625] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[ 1.241626] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.241628] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
[ 1.241630] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
[ 1.241632] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
[ 1.241671] divide error: 0000 [#1] SMP
[ 1.241677] Modules linked in: snd_hda_codec_realtek(+) aesni_intel(+) snd_hda_codec_generic aes_x86_64 glue_helper i915(+) lrw gf128mul ablk_helper cryptd snd_hda_intel snd_hda_codec i2c_algo_bit snd_hwdep pcspkr snd_hda_core drm_kms_helper mei_me snd_pcm drm snd_timer mei snd psmouse soundcore lpc_ich serio_raw shpchp efivars mfd_core i2c_i801 tpm_tis tpm battery nuvoton_cir rc_core video i2c_designware_platform i2c_designware_core acpi_pad button processor fuse autofs4 ext4 crc16 mbcache jbd2 sg sd_mod hid_generic usbhid ahci libahci libata scsi_mod ehci_pci ehci_hcd e1000e xhci_pci ptp pps_core xhci_hcd usbcore usb_common fan thermal i2c_hid i2c_core sdhci_acpi sdhci hid mmc_core
[ 1.241748] CPU: 3 PID: 251 Comm: modprobe Not tainted 4.3.0-rc4-bisect-00536-g400a6b9 #86
[ 1.241752] Hardware name: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff/NUC5i3RYB, BIOS RYBDWi35.86A.0130.2014.1203.1639 12/03/2014
[ 1.241756] task: ffff8802138343c0 ti: ffff8802145b0000 task.ti: ffff8802145b0000
[ 1.241760] RIP: 0010:[<ffffffffa04e591a>] [<ffffffffa04e591a>] ilk_compute_wm_level.isra.29+0x14a/0x2c0 [i915]
[ 1.241796] RSP: 0018:ffff8802145b36f8 EFLAGS: 00010206
[ 1.241799] RAX: 000000000000007f RBX: ffff880213e73700 RCX: 0000000000000000
[ 1.241802] RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000004025d
[ 1.241809] RBP: ffff880213e73400 R08: 000000000f000870 R09: ffff8800d873d280
[ 1.241814] R10: ffff8800d873d340 R11: 0000000000000002 R12: 0000000000000000
[ 1.241820] R13: ffff8800d873d1c0 R14: 0000000000000014 R15: 0000000000000014
[ 1.241825] FS: 00007fd01ed0f700(0000) GS:ffff88021f180000(0000) knlGS:0000000000000000
[ 1.241833] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.241838] CR2: 00007fc2fcae9000 CR3: 00000002147e2000 CR4: 00000000003406e0
[ 1.241843] Stack:
[ 1.241847] ffffffff00000014 0000000000000000 ffff8800d873d340 ffff8800d873d280
[ 1.241857] 00000000ffffffff ffff8800d43bd800 ffff880213e73400 ffff880213e73700
[ 1.241867] ffff8800d873d340 ffff8800d8701000 ffff8800d43bdb60 ffffffffa04e6804
[ 1.241876] Call Trace:
[ 1.241910] [<ffffffffa04e6804>] ? ilk_compute_pipe_wm+0x174/0x470 [i915]
[ 1.241920] [<ffffffff810ad04c>] ? mutex_optimistic_spin+0xec/0x1c0
[ 1.241963] [<ffffffffa0546f4c>] ? intel_crtc_atomic_check+0x10c/0x1f0 [i915]
[ 1.241971] [<ffffffffa0441a94>] ? drm_atomic_helper_check_planes+0x134/0x1b0 [drm_kms_helper]
[ 1.242009] [<ffffffffa054a016>] ? intel_atomic_check+0x9a6/0xfd0 [i915]
[ 1.242022] [<ffffffffa03b8dd3>] ? drm_atomic_get_connector_state+0x93/0x110 [drm]
[ 1.242063] [<ffffffffa054e7c3>] ? intel_modeset_setup_hw_state+0x9f3/0xe60 [i915]
[ 1.242077] [<ffffffffa03b7fe7>] ? drm_modeset_lock_all_crtcs+0x87/0xa0 [drm]
[ 1.242118] [<ffffffffa05507bb>] ? intel_modeset_init+0xa4b/0x19b0 [i915]
[ 1.242159] [<ffffffffa0587f22>] ? i915_driver_load+0xe82/0x1640 [i915]
[ 1.242169] [<ffffffffa03a391c>] ? drm_dev_register+0x9c/0xb0 [drm]
[ 1.242176] [<ffffffffa03a5c69>] ? drm_get_pci_dev+0x89/0x1e0 [drm]
[ 1.242184] [<ffffffff812fa34f>] ? local_pci_probe+0x3f/0xa0
[ 1.242190] [<ffffffff812fb738>] ? pci_device_probe+0xd8/0x120
[ 1.242198] [<ffffffff813cc554>] ? driver_probe_device+0x214/0x490
[ 1.242205] [<ffffffff813cc84b>] ? __driver_attach+0x7b/0x80
[ 1.242213] [<ffffffff813cc7d0>] ? driver_probe_device+0x490/0x490
[ 1.242220] [<ffffffff813ca3ca>] ? bus_for_each_dev+0x5a/0x90
[ 1.242227] [<ffffffff813cba95>] ? bus_add_driver+0x1e5/0x280
[ 1.242234] [<ffffffffa05e3000>] ? 0xffffffffa05e3000
[ 1.242241] [<ffffffff813cd137>] ? driver_register+0x57/0xd0
[ 1.242249] [<ffffffff8100213e>] ? do_one_initcall+0xce/0x1f0
[ 1.242257] [<ffffffff81147b60>] ? do_init_module+0x5a/0x1e0
[ 1.242264] [<ffffffff810e48c6>] ? load_module+0x2166/0x2610
[ 1.242268] [<ffffffff810e0b10>] ? __symbol_put+0x30/0x30
[ 1.242273] [<ffffffff810e4f26>] ? SyS_finit_module+0x76/0xa0
[ 1.242278] [<ffffffff8152fbf6>] ? entry_SYSCALL_64_fastpath+0x16/0x75
[ 1.242282] Code: c2 c1 f8 03 31 d2 84 c9 74 26 41 80 bd 80 00 00 00 00 74 1c 41 8b 4d 68 41 2b 4d 60 0f b6 c0 c1 e6 06 31 d2 0f af c8 8d 44 31 ff <f7> f1 8d 50 02 89 53 10 c6 03 01 48 83 c4 28 5b 5d 41 5c 41 5d
[ 1.242316] RIP [<ffffffffa04e591a>] ilk_compute_wm_level.isra.29+0x14a/0x2c0 [i915]
[ 1.242350] RSP <ffff8802145b36f8>
[ 1.242363] ---[ end trace 82dc4436b00d09dc ]---
[ 1.242472] snd_hda_intel 0000:00:03.0: failed to add i915 component master (-19)
[ 1.244231] Adding 8262652k swap on /dev/sda3. Priority:-1 extents:1 across:8262652k SSFS
[ 1.246076] iTCO_vendor_support: vendor-support=0
[ 1.246473] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.246522] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.246643] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.264569] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1.268017] hid-generic 0003:046D:C52A.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:14.0-2/input0
[ 1.272299] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 1.273205] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 1.273302] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 1.275968] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52A.0003/input/input13
[ 1.284598] systemd-journald[183]: Received request to flush runtime journal from PID 1
[ 1.291693] tsc: Refined TSC clocksource calibration: 2095.149 MHz
[ 1.291703] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e3349f83e9, max_idle_ns: 440795233330 ns
[ 1.327802] intel_rapl: Found RAPL domain package
[ 1.327814] intel_rapl: Found RAPL domain core
[ 1.327821] intel_rapl: Found RAPL domain uncore
[ 1.327827] intel_rapl: Found RAPL domain dram
[ 1.332022] hid-generic 0003:046D:C52A.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:14.0-2/input1
[ 1.389808] RPC: Registered named UNIX socket transport module.
[ 1.389814] RPC: Registered udp transport module.
[ 1.389817] RPC: Registered tcp transport module.
[ 1.389820] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.392181] FS-Cache: Loaded
[ 1.397132] FS-Cache: Netfs 'nfs' registered for caching
[ 1.402597] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.443771] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 1.515720] cfg80211: World regulatory domain updated:
[ 1.515730] cfg80211: DFS Master region: unset
[ 1.515733] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1.515745] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515754] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515772] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1.515825] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1.515833] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1.515839] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1.515846] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1.573063] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.573070] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.588528] Bluetooth: Core ver 2.20
[ 1.588551] NET: Registered protocol family 31
[ 1.588556] Bluetooth: HCI device and connection manager initialized
[ 1.588563] Bluetooth: HCI socket layer initialized
[ 1.588568] Bluetooth: L2CAP socket layer initialized
[ 1.588578] Bluetooth: SCO socket layer initialized
[ 1.591790] usbcore: registered new interface driver btusb
[ 1.608657] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1.608908] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 1.608914] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2)
[ 1.608924] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 1.608929] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[ 1.668953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.668960] Bluetooth: BNEP filters: protocol multicast
[ 1.668965] Bluetooth: BNEP socket layer initialized
[ 2.292348] clocksource: Switched to clocksource tsc
[ 4.627274] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.646272] random: nonblocking pool is initialized
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-10-06 14:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 22:53 [PATCH 00/15] Atomic watermark updates (v5) Matt Roper
2015-09-24 22:53 ` [PATCH 01/15] drm/i915: Drop redundant watermark programming Matt Roper
2015-09-24 22:53 ` [PATCH 02/15] drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2) Matt Roper
2016-01-05 12:49 ` Flicker caused by "drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)" Jan Niehusmann
2016-01-05 21:58 ` Matt Roper
2016-01-06 0:46 ` Jan Niehusmann
2015-09-24 22:53 ` [PATCH 03/15] drm/i915: Eliminate usage of pipe_wm_parameters from ILK-style WM (v2) Matt Roper
2015-09-24 22:53 ` [PATCH 04/15] drm/i915: Determine I915_MAX_PLANES from plane enum Matt Roper
2015-09-24 22:53 ` [PATCH 05/15] drm/i915/skl: Simplify wm structures slightly (v2) Matt Roper
2015-09-30 15:13 ` Daniel Vetter
2015-09-24 22:53 ` [PATCH 06/15] drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 07/15] drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to atomic check Matt Roper
2015-09-24 22:53 ` [PATCH 08/15] drm/i915: Drop intel_update_sprite_watermarks Matt Roper
2015-09-24 22:53 ` [PATCH 09/15] drm/i915: Refactor ilk_update_wm (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 10/15] drm/i915: Calculate pipe watermarks into CRTC state (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 11/15] drm/i915: Calculate ILK-style watermarks during atomic check (v3) Matt Roper
2015-09-24 22:53 ` [PATCH 12/15] drm/i915: Don't set plane visible during HW readout if CRTC is off Matt Roper
2015-09-24 22:53 ` [PATCH 13/15] drm/i915: Calculate watermark configuration during atomic check (v2) Matt Roper
2015-09-24 22:53 ` [PATCH 14/15] drm/i915: Sanitize watermarks after hardware state readout Matt Roper
2015-10-01 13:58 ` Jani Nikula
2015-10-01 16:12 ` Daniel Vetter
2015-10-01 16:53 ` [PATCH] drm/i915: Convert hsw_compute_linetime_wm to use in-flight state Matt Roper
2015-10-06 14:34 ` Jani Nikula [this message]
2015-09-24 22:53 ` [PATCH 15/15] drm/i915: Add two-stage ILK-style watermark programming (v5) Matt Roper
2015-09-30 15:20 ` [PATCH 00/15] Atomic watermark updates (v5) Daniel Vetter
2015-09-30 22:21 ` Zanoni, Paulo R
2015-10-01 23:03 ` [PATCH] fixup! drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3) Matt Roper
2015-10-02 18:43 ` Zanoni, Paulo R
2015-10-06 10:13 ` [PATCH] fixup! drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3) [regression] Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87twq483rl.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.