From: Kevin Hilman <khilman@deeprootsystems.com>
To: Chaithrika U S <chaithrika@ti.com>
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
davinci-linux-open-source@linux.davincidsp.com
Subject: Re: [PATCH 1/2] davinci: MMC: Add a function to control reset state of the controller
Date: Tue, 05 Jan 2010 15:55:23 -0800 [thread overview]
Message-ID: <87tyv0p0no.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1261052091-14379-1-git-send-email-chaithrika@ti.com> (Chaithrika U. S.'s message of "Thu\, 17 Dec 2009 17\:44\:51 +0530")
Chaithrika U S <chaithrika@ti.com> writes:
> Add a helper function which will aid in changing the reset
> status of the controller.
>
> Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
> ---
> Applies to Linus' kernel tree.
>
> drivers/mmc/host/davinci_mmc.c | 37 ++++++++++++++++---------------------
> 1 files changed, 16 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
> index dd45e7c..25645bf 100644
> --- a/drivers/mmc/host/davinci_mmc.c
> +++ b/drivers/mmc/host/davinci_mmc.c
> @@ -884,19 +884,26 @@ static void mmc_davinci_cmd_done(struct mmc_davinci_host *host,
> }
> }
>
> -static void
> -davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
> +static inline void mmc_davinci_reset_ctrl(struct mmc_davinci_host *host,
> + int val)
> {
> u32 temp;
>
> - /* reset command and data state machines */
> temp = readl(host->base + DAVINCI_MMCCTL);
> - writel(temp | MMCCTL_CMDRST | MMCCTL_DATRST,
> - host->base + DAVINCI_MMCCTL);
> + if (val) /* reset */
> + temp |= MMCCTL_CMDRST | MMCCTL_DATRST;
> + else /* enable */
> + temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
>
> - temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
> - udelay(10);
> writel(temp, host->base + DAVINCI_MMCCTL);
> + udelay(10);
> +}
> +
> +static void
> +davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
> +{
> + mmc_davinci_reset_ctrl(host, 1);
> + mmc_davinci_reset_ctrl(host, 0);
> }
>
> static irqreturn_t mmc_davinci_irq(int irq, void *dev_id)
> @@ -1100,15 +1107,8 @@ static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host)
> #endif
> static void __init init_mmcsd_host(struct mmc_davinci_host *host)
> {
> - /* DAT line portion is diabled and in reset state */
> - writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_DATRST,
> - host->base + DAVINCI_MMCCTL);
> -
> - /* CMD line portion is diabled and in reset state */
> - writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_CMDRST,
> - host->base + DAVINCI_MMCCTL);
>
> - udelay(10);
> + mmc_davinci_reset_ctrl(host, 1);
>
> writel(0, host->base + DAVINCI_MMCCLK);
> writel(MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
> @@ -1116,12 +1116,7 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host)
> writel(0x1FFF, host->base + DAVINCI_MMCTOR);
> writel(0xFFFF, host->base + DAVINCI_MMCTOD);
>
> - writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_DATRST,
> - host->base + DAVINCI_MMCCTL);
> - writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_CMDRST,
> - host->base + DAVINCI_MMCCTL);
> -
> - udelay(10);
> + mmc_davinci_reset_ctrl(host, 0);
> }
>
> static int __init davinci_mmcsd_probe(struct platform_device *pdev)
> --
> 1.5.6
next prev parent reply other threads:[~2010-01-05 23:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-17 12:14 [PATCH 1/2] davinci: MMC: Add a function to control reset state of the controller Chaithrika U S
2010-01-05 23:55 ` Kevin Hilman [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-03-16 20:30 Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tyv0p0no.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=akpm@linux-foundation.org \
--cc=chaithrika@ti.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.