From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [PATCH v2] OMAP3: PM: reset USB OTG module on boot Date: Wed, 24 Jun 2009 11:00:41 -0700 Message-ID: <87tz251ph2.fsf@deeprootsystems.com> References: <1245857533-2419-1-git-send-email-khilman@deeprootsystems.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mail-pz0-f189.google.com ([209.85.222.189]:40283 "EHLO mail-pz0-f189.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1761392AbZFXSAl (ORCPT ); Wed, 24 Jun 2009 14:00:41 -0400 Received: by pzk27 with SMTP id 27so799077pzk.33 for ; Wed, 24 Jun 2009 11:00:43 -0700 (PDT) In-Reply-To: (Vikram Pandita's message of "Wed\, 24 Jun 2009 22\:32\:33 +0530") Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "Pandita, Vikram" Cc: "linux-omap@vger.kernel.org" "Pandita, Vikram" writes: >>-----Original Message----- >>From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-owner@vger.kernel.org] On Behalf Of Kevin >>Hilman >>Sent: Wednesday, June 24, 2009 10:32 AM >>To: linux-omap@vger.kernel.org >>Subject: [PATCH v2] OMAP3: PM: reset USB OTG module on boot >> >>Rather than simply setting force-idle mode on boot, do a reset of the >>OTG module. This really ensures that any bootloader/bootstrap code >>that leaves it active will not prevent future retention. After reset, >>OTG module will be in force-idle, force-standby mode. >> >>In addition, ensure that the iclk is enabled before attempting a write >>to the module SYSCONFIG register. > > This patch solves MUSB issue, but is not generic for all IP blocks on omap. > > ROM code or u-boot could leave the module sysconfig in a non-idle state. > > I recommend just like CONFIG_OMAP_RESET_CLOCKS for clocks, same could be done generically for all SYSCONFIG registers in some prcm code and not driver specific. > >> >>Problem reported by Mike Chan >> >>Tested-by: Mike Chan >>Signed-off-by: Kevin Hilman >>--- >>Updates from v1 >>- use ioremap()+__raw_write instead of deprecated omap_write() >>- Re: defines in omap2430.h, this header is not exported outside >> drivers/usb, so define it locally yere >> >> arch/arm/mach-omap2/usb-musb.c | 31 +++++++++++++++++++++++++++---- >> 1 files changed, 27 insertions(+), 4 deletions(-) >> >>diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c >>index d85296d..31adbe6 100644 >>--- a/arch/arm/mach-omap2/usb-musb.c >>+++ b/arch/arm/mach-omap2/usb-musb.c >>@@ -26,18 +26,41 @@ >> >> #include >> >>+#include >>+ >> #include >> #include >> #include >> #include >> >>-#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404) >>+#define OTG_SYSCONFIG 0x404 >>+#define OTG_SYSC_SOFTRESET BIT(1) > > This is already defined in drivers/usb/musb/omap2430.h > Could we reuse? See comment above in the 'Updates from v1' section. > > #if defined(CONFIG_ARCH_OMAP2430) > #define OMAP_HSOTG_BASE (OMAP243X_HS_BASE) > #elif defined(CONFIG_ARCH_OMAP3430) > #define OMAP_HSOTG_BASE (OMAP34XX_HSUSB_OTG_BASE) > #endif > #define OMAP_HSOTG(offset) (OMAP_HSOTG_BASE + 0x400 + (offset)) > #define OTG_REVISION OMAP_HSOTG(0x0) > #define OTG_SYSCONFIG OMAP_HSOTG(0x4) > > >> >> static void __init usb_musb_pm_init(void) >> { >>- /* Ensure force-idle mode for OTG controller */ >>- if (cpu_is_omap34xx()) >>- omap_writel(0, OTG_SYSCONFIG); >>+ struct clk *iclk; >>+ void __iomem *otg_base; >>+ >>+ if (!cpu_is_omap34xx()) >>+ return; > > Why is this sys-config reset done only for omap34xx() > This should be valid for any old 24xx() as well as new 44xx() omaps You're correct. Good catch. The force-idle "fix" that this is replacing was only being done on 34xx due to the smart-idle errata. However, this reset should be done even without any errata. Thanks for review, will respin. Kevin >>+ >>+ otg_base = ioremap(OMAP34XX_HSUSB_OTG_BASE, SZ_4K); >>+ if (WARN_ON(!otg_base)) >>+ return; >>+ >>+ iclk = clk_get(NULL, "hsotgusb_ick"); >>+ if (WARN_ON(!iclk)) >>+ return; >>+ >>+ clk_enable(iclk); >>+ >>+ /* Reset OTG controller. After reset, it will be in >>+ * force-idle, force-standby mode. */ >>+ __raw_writel(OTG_SYSC_SOFTRESET, otg_base + OTG_SYSCONFIG); >>+ >>+ clk_disable(iclk); >>+ clk_put(iclk); >>+ iounmap(otg_base); >> } >> >> #ifdef CONFIG_USB_MUSB_SOC >>-- >>1.6.3.2 >> >>-- >>To unsubscribe from this list: send the line "unsubscribe linux-omap" in >>the body of a message to majordomo@vger.kernel.org >>More majordomo info at http://vger.kernel.org/majordomo-info.html