From: Dmitriy Monakhov <dmonakhov@openvz.org>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@osdl.org>,
devel@openvz.org, linux-pci@atrey.karlin.mff.cuni.cz,
netdev@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: [PATCH 2/5] fixing errors handling during pci_driver resume stage [ata]
Date: Tue, 09 Jan 2007 12:01:28 +0300 [thread overview]
Message-ID: <87tzz0mv4n.fsf@sw.ru> (raw)
[-- Attachment #1: Type: text/plain, Size: 150 bytes --]
ata pci drivers have to return correct error code during resume stage in
case of errors.
Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
-----
[-- Attachment #2: diff-pci-ata --]
[-- Type: text/plain, Size: 3255 bytes --]
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b517d24..0656334 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1372,7 +1372,9 @@ static int ahci_pci_device_resume(struct
void __iomem *mmio = host->mmio_base;
int rc;
- ata_pci_device_do_resume(pdev);
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(mmio, pdev);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0d51d13..3d6729d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6221,12 +6221,19 @@ void ata_pci_device_do_suspend(struct pc
}
}
-void ata_pci_device_do_resume(struct pci_dev *pdev)
+int ata_pci_device_do_resume(struct pci_dev *pdev)
{
+ int ret = 0;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
+ return ret;
+ }
+
pci_set_master(pdev);
+ return ret;
}
int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
@@ -6246,8 +6253,10 @@ int ata_pci_device_suspend(struct pci_de
int ata_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int err;
- ata_pci_device_do_resume(pdev);
+ if ((err = ata_pci_device_do_resume(pdev)))
+ return err;
ata_host_resume(host);
return 0;
}
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 7808d03..8451143 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -710,8 +710,12 @@ err_out:
static int sil_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int err;
+
+ err = ata_pci_device_do_resume(pdev);
+ if (err)
+ return err;
- ata_pci_device_do_resume(pdev);
sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
host->mmio_base);
ata_host_resume(host);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 5aa288d..be6971a 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1200,8 +1200,11 @@ static int sil24_pci_device_resume(struc
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct sil24_host_priv *hpriv = host->private_data;
+ int err;
- ata_pci_device_do_resume(pdev);
+ err = ata_pci_device_do_resume(pdev);
+ if (err)
+ return err;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ab27548..283ca72 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -719,7 +719,7 @@ extern int ata_pci_init_one (struct pci_
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern void ata_pci_device_do_resume(struct pci_dev *pdev);
+extern int ata_pci_device_do_resume(struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int ata_pci_device_resume(struct pci_dev *pdev);
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
next reply other threads:[~2007-01-09 9:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-09 9:01 Dmitriy Monakhov [this message]
2007-01-12 23:50 ` [PATCH 2/5] fixing errors handling during pci_driver resume stage [ata] Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tzz0mv4n.fsf@sw.ru \
--to=dmonakhov@openvz.org \
--cc=akpm@osdl.org \
--cc=devel@openvz.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=linux-scsi@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.