From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hgr6G-0007ZL-Kr for ath10k@lists.infradead.org; Fri, 28 Jun 2019 13:39:38 +0000 From: Kalle Valo Subject: Re: ath10k-firmware: QCA9888 hw2.0: Update OpenMesh A62 specific BDFs References: <1573300.yjC3Zj7d1F@bentobox> Date: Fri, 28 Jun 2019 16:39:32 +0300 In-Reply-To: <1573300.yjC3Zj7d1F@bentobox> (Sven Eckelmann's message of "Thu, 10 Jan 2019 14:00:13 +0100") Message-ID: <87v9wpde23.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Sven Eckelmann Cc: ath10k@lists.infradead.org Sven Eckelmann writes: > The OpenMesh A62 AP requires three special BDFs to get the Wi-Fi PHYs working > (correctly). The bmi-board-id='s would clash with one of the the IPQ401X > AP-DK boards because QCA doesn't provide special IDs for customers and seems > to use the AP-DK board-ids in the wifi firmware to change its behavior. This > request contains the file for QCA9888. The QCA4019 one will be submitted > in a different request. > > This update contains: > > * add of the antenna gain > * adjustments of the antenna sensitivity (see configAddr) > * CTLs for DFS channels > > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1) > - one QCA4018 radio is used as 2.4GHz radio > - one QCA4018 radio is used as 5GHz radio > - an additional QCA9888 5GHz radio is attached via PCI > > * origin of the board file (did you create it yourself or where you > downloaded) > > - it was created by the ODM and QCA for the OpenMesh A62 > - was provided by the ODM to OpenMesh for this product (this includes > distribution) > - it is the latest release from 2018-11-28 > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA9888 hw2.0 > > + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 > md5sum: 60f36b31866f5797aa7a857ed24b6913 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") Thanks, added to QCA9888/hw2.0/board-2.bin: New: Changed: bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 Deleted: 0 board image(s) added, 1 changed, 0 deleted, 7 in total https://github.com/kvalo/ath10k-firmware/commit/1203d19dacc1c0955c483fdba980320ba8c0322f -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k