All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: Markus Armbruster <armbru@redhat.com>
Cc: qemu-devel@nongnu.org, lersek@redhat.com, kwolf@redhat.com,
	mreitz@redhat.com, qemu-block@nongnu.org, qemu-ppc@nongnu.org,
	David Gibson <david@gibson.dropbear.id.au>
Subject: Re: [Qemu-devel] [PATCH v2 07/11] ppc405_boards: Don't size flash memory to match backing image
Date: Wed, 27 Feb 2019 10:35:34 +0000	[thread overview]
Message-ID: <87va15lds9.fsf@zen.linaroharston> (raw)
In-Reply-To: <20190226193408.23862-8-armbru@redhat.com>


Markus Armbruster <armbru@redhat.com> writes:

> Machine "ref405ep" maps its flash memory at address 2^32 - image size.
> Image size is rounded up to the next multiple of 64KiB.  Useless,
> because pflash_cfi02_realize() fails with "failed to read the initial
> flash content" unless the rounding is a no-op.
>
> If the image size exceeds 0x80000 Bytes, we overlap first SRAM, then
> other stuff.  No idea how that would play out, but a useful outcomes
> seem unlikely.
>
> Map the flash memory at fixed address 0xFFF80000 with size 512KiB,
> regardless of image size, to match the physical hardware.
>
> Machine "taihu" maps its boot flash memory similarly.  The code even
> has a comment /* XXX: should check that size is 2MB */, followed by
> disabled code to adjust the size to 2MiB regardless of image size.
>
> Its code to map its application flash memory looks the same, except
> there the XXX comment asks for 32MiB, and the code to adjust the size
> isn't disabled.  Note that pflash_cfi02_realize() fails with "failed
> to read the initial flash content" for images smaller than 32MiB.
>
> Map the boot flash memory at fixed address 0xFFE00000 with size 2MiB,
> to match the physical hardware.  Delete dead code from application
> flash mapping, and simplify some.

It seems to me the DEBUG_BOARD_INIT code is probably out of date cruft
that could be excised all together. But that doesn't stop this being
useful:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

>
> Cc: David Gibson <david@gibson.dropbear.id.au>
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> Acked-by: David Gibson <david@gibson.dropbear.id.au>
> ---
>  hw/ppc/ppc405_boards.c | 51 +++++++++++++-----------------------------
>  1 file changed, 15 insertions(+), 36 deletions(-)
>
> diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
> index f47b15f10e..672717ef1b 100644
> --- a/hw/ppc/ppc405_boards.c
> +++ b/hw/ppc/ppc405_boards.c
> @@ -158,7 +158,7 @@ static void ref405ep_init(MachineState *machine)
>      target_ulong kernel_base, initrd_base;
>      long kernel_size, initrd_size;
>      int linux_boot;
> -    int fl_idx, fl_sectors, len;
> +    int len;
>      DriveInfo *dinfo;
>      MemoryRegion *sysmem = get_system_memory();
>
> @@ -185,26 +185,19 @@ static void ref405ep_init(MachineState *machine)
>  #ifdef DEBUG_BOARD_INIT
>      printf("%s: register BIOS\n", __func__);
>  #endif
> -    fl_idx = 0;
>  #ifdef USE_FLASH_BIOS
> -    dinfo = drive_get(IF_PFLASH, 0, fl_idx);
> +    dinfo = drive_get(IF_PFLASH, 0, 0);
>      if (dinfo) {
> -        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> -        bios_size = blk_getlength(blk);
> -        fl_sectors = (bios_size + 65535) >> 16;
>  #ifdef DEBUG_BOARD_INIT
> -        printf("Register parallel flash %d size %lx"
> -               " at addr %lx '%s' %d\n",
> -               fl_idx, bios_size, -bios_size,
> -               blk_name(blk), fl_sectors);
> +        printf("Register parallel flash\n");
>  #endif
> +        bios_size = 8 * MiB;
>          pflash_cfi02_register((uint32_t)(-bios_size),
>                                NULL, "ef405ep.bios", bios_size,
> -                              blk, 65536, fl_sectors, 1,
> +                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> +                              64 * KiB, bios_size / (64 * KiB), 1,
>                                2, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
>                                1);
> -        fl_idx++;
>      } else
>  #endif
>      {
> @@ -455,7 +448,7 @@ static void taihu_405ep_init(MachineState *machine)
>      target_ulong kernel_base, initrd_base;
>      long kernel_size, initrd_size;
>      int linux_boot;
> -    int fl_idx, fl_sectors;
> +    int fl_idx;
>      DriveInfo *dinfo;
>
>      /* RAM is soldered to the board so the size cannot be changed */
> @@ -486,21 +479,14 @@ static void taihu_405ep_init(MachineState *machine)
>  #if defined(USE_FLASH_BIOS)
>      dinfo = drive_get(IF_PFLASH, 0, fl_idx);
>      if (dinfo) {
> -        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> -        bios_size = blk_getlength(blk);
> -        /* XXX: should check that size is 2MB */
> -        //        bios_size = 2 * 1024 * 1024;
> -        fl_sectors = (bios_size + 65535) >> 16;
>  #ifdef DEBUG_BOARD_INIT
> -        printf("Register parallel flash %d size %lx"
> -               " at addr %lx '%s' %d\n",
> -               fl_idx, bios_size, -bios_size,
> -               blk_name(blk), fl_sectors);
> +        printf("Register boot flash\n");
>  #endif
> -        pflash_cfi02_register((uint32_t)(-bios_size),
> +        bios_size = 2 * MiB;
> +        pflash_cfi02_register(0xFFE00000,
>                                NULL, "taihu_405ep.bios", bios_size,
> -                              blk, 65536, fl_sectors, 1,
> +                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> +                              64 * KiB, bios_size / (64 * KiB), 1,
>                                4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
>                                1);
>          fl_idx++;
> @@ -536,20 +522,13 @@ static void taihu_405ep_init(MachineState *machine)
>      /* Register Linux flash */
>      dinfo = drive_get(IF_PFLASH, 0, fl_idx);
>      if (dinfo) {
> -        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> -        bios_size = blk_getlength(blk);
> -        /* XXX: should check that size is 32MB */
>          bios_size = 32 * MiB;
> -        fl_sectors = (bios_size + 65535) >> 16;
>  #ifdef DEBUG_BOARD_INIT
> -        printf("Register parallel flash %d size %lx"
> -               " at addr " TARGET_FMT_lx " '%s'\n",
> -               fl_idx, bios_size, (target_ulong)0xfc000000,
> -               blk_name(blk));
> +        printf("Register application flash\n"
>  #endif
>          pflash_cfi02_register(0xfc000000, NULL, "taihu_405ep.flash", bios_size,
> -                              blk, 65536, fl_sectors, 1,
> +                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> +                              64 * KiB, bios_size / (64 * KiB), 1,
>                                4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
>                                1);
>          fl_idx++;


--
Alex Bennée

  reply	other threads:[~2019-02-27 10:35 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-26 19:33 [Qemu-devel] [PATCH v2 00/11] pflash: Fixes and cleanups Markus Armbruster
2019-02-26 19:33 ` [Qemu-devel] [PATCH v2 01/11] pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02 Markus Armbruster
2019-03-05 12:22   ` Philippe Mathieu-Daudé
2019-02-26 19:33 ` [Qemu-devel] [PATCH v2 02/11] pflash_cfi01: Do not exit() on guest aborting "write to buffer" Markus Armbruster
2019-02-26 23:59   ` Philippe Mathieu-Daudé
2019-02-27 11:09   ` Alex Bennée
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 03/11] pflash_cfi01: Log use of flawed " Markus Armbruster
2019-02-26 23:57   ` Philippe Mathieu-Daudé
2019-02-27 11:30   ` Alex Bennée
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 04/11] pflash: Rename *CFI_PFLASH* to *PFLASH_CFI* Markus Armbruster
2019-02-27  0:00   ` Philippe Mathieu-Daudé
2019-02-27 11:09   ` Alex Bennée
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 05/11] hw: Use PFLASH_CFI0{1, 2} and TYPE_PFLASH_CFI0{1, 2} Markus Armbruster
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 06/11] sam460ex: Don't size flash memory to match backing image Markus Armbruster
2019-02-26 22:30   ` BALATON Zoltan
2019-02-27 11:04   ` Alex Bennée
2019-03-05 19:12   ` Philippe Mathieu-Daudé
2019-03-05 22:49     ` [Qemu-devel] [Qemu-ppc] " BALATON Zoltan
2019-03-06  6:51       ` Markus Armbruster
2019-03-06  7:47         ` Philippe Mathieu-Daudé
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 07/11] ppc405_boards: " Markus Armbruster
2019-02-27 10:35   ` Alex Bennée [this message]
2019-03-07  7:01     ` Markus Armbruster
2019-03-08  4:39       ` David Gibson
2019-03-08  9:46         ` Markus Armbruster
2019-03-05 19:23   ` Philippe Mathieu-Daudé
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 08/11] r2d: Flash memory creation is confused about size, mark FIXME Markus Armbruster
2019-03-05 17:48   ` Philippe Mathieu-Daudé
2019-03-06 15:00     ` Markus Armbruster
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 09/11] mips_malta: Clean up definition of flash memory size somewhat Markus Armbruster
2019-02-27 11:28   ` Alex Bennée
2019-03-05 16:33     ` Philippe Mathieu-Daudé
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 10/11] pflash: Clean up after commit 368a354f02b part 1 Markus Armbruster
2019-03-05 13:29   ` Philippe Mathieu-Daudé
2019-02-26 19:34 ` [Qemu-devel] [PATCH v2 11/11] pflash: Clean up after commit 368a354f02b part 2 Markus Armbruster
2019-02-27  1:11   ` [Qemu-devel] [Qemu-ppc] " BALATON Zoltan
2019-02-27  6:57     ` Markus Armbruster
2019-03-05 13:55   ` [Qemu-devel] " Philippe Mathieu-Daudé
2019-03-05 16:42     ` Markus Armbruster
2019-03-05 17:54       ` Philippe Mathieu-Daudé
2019-02-26 19:56 ` [Qemu-devel] [PATCH v2 00/11] pflash: Fixes and cleanups Alex Bennée
2019-02-27  6:57   ` Markus Armbruster
2019-02-27 11:30     ` Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87va15lds9.fsf@zen.linaroharston \
    --to=alex.bennee@linaro.org \
    --cc=armbru@redhat.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=kwolf@redhat.com \
    --cc=lersek@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.