Re: [PATCH] rtc: dt-binding: abx80x: fix resistance scale

[Baruch Siach <baruch@tkos.co.il>]

Hi Alexandre,

Alexandre Belloni writes:
> On 19/11/2018 14:34:02+0200, Baruch Siach wrote:
>> The abracon,tc-resistor property value is in KOhm.
>> 
>> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
>> ---
>>  Documentation/devicetree/bindings/rtc/abracon,abx80x.txt | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
>> index be789685a1c2..e668b5f65314 100644
>> --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
>> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
>> @@ -27,4 +27,4 @@ and valid to enable charging:
>>  
>>   - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
>>   - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
>> -                          resistor, the other values are in ohm.
>> +                          resistor, the other values are in KOhm.
>
> The correct SI prefix is k so this should be kOhm. If you agree, I can
> fix this up.

I am fine with that. Please fix the commit message as well.

Thanks,
baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -