From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Mon, 25 Sep 2017 18:04:08 +0200 Subject: [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 In-Reply-To: <20170922130834.7096-1-miquel.raynal@free-electrons.com> (Miquel Raynal's message of "Fri, 22 Sep 2017 15:08:34 +0200") References: <20170922130834.7096-1-miquel.raynal@free-electrons.com> Message-ID: <87vak6ix3b.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Miquel, On ven., sept. 22 2017, Miquel Raynal wrote: > From: Christine Gharzuzi > > Add the DT node enabling Armada-8040-DB CPS SPI controller driver. > > Add the SPI NAND flash device connected on the bus. Fill the MTD > partitions layout. > > Signed-off-by: Christine Gharzuzi > Signed-off-by: Miquel Raynal Applied on mvebu/dt64 Thanks, Gregory > --- > > Hello, > > Made a mistake resending the v1 prefixed by v2. > This is the real v2. > > It fixes the third partition address from 0xd00000 to 0xf00000. > > Thanks, > Miqu?l > > arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > index 0d7b2ae46610..85c72f835184 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > @@ -216,6 +216,37 @@ > clock-frequency = <100000>; > }; > > +&cps_spi1 { > + status = "okay"; > + > + spi-flash at 0 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition at 0 { > + label = "Boot"; > + reg = <0x0 0x200000>; > + }; > + partition at 200000 { > + label = "Filesystem"; > + reg = <0x200000 0xd00000>; > + }; > + partition at f00000 { > + label = "Boot_2nd"; > + reg = <0xf00000 0x100000>; > + }; > + }; > + }; > +}; > + > /* CON4 on CP1 expansion */ > &cps_sata0 { > status = "okay"; > -- > 2.11.0 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: Re: [PATCH RESEND v2] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 Date: Mon, 25 Sep 2017 18:04:08 +0200 Message-ID: <87vak6ix3b.fsf@free-electrons.com> References: <20170922130834.7096-1-miquel.raynal@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <20170922130834.7096-1-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> (Miquel Raynal's message of "Fri, 22 Sep 2017 15:08:34 +0200") Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Miquel Raynal Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Thomas Petazzoni , Antoine Tenart , Nadav Haklai , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Christine Gharzuzi List-Id: devicetree@vger.kernel.org Hi Miquel, On ven., sept. 22 2017, Miquel Raynal wrote: > From: Christine Gharzuzi > > Add the DT node enabling Armada-8040-DB CPS SPI controller driver. > > Add the SPI NAND flash device connected on the bus. Fill the MTD > partitions layout. > > Signed-off-by: Christine Gharzuzi > Signed-off-by: Miquel Raynal Applied on mvebu/dt64 Thanks, Gregory > --- > > Hello, > > Made a mistake resending the v1 prefixed by v2. > This is the real v2. > > It fixes the third partition address from 0xd00000 to 0xf00000. > > Thanks, > Miquèl > > arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > index 0d7b2ae46610..85c72f835184 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts > @@ -216,6 +216,37 @@ > clock-frequency = <100000>; > }; > > +&cps_spi1 { > + status = "okay"; > + > + spi-flash@0 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "Boot"; > + reg = <0x0 0x200000>; > + }; > + partition@200000 { > + label = "Filesystem"; > + reg = <0x200000 0xd00000>; > + }; > + partition@f00000 { > + label = "Boot_2nd"; > + reg = <0xf00000 0x100000>; > + }; > + }; > + }; > +}; > + > /* CON4 on CP1 expansion */ > &cps_sata0 { > status = "okay"; > -- > 2.11.0 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html