From: Julien Cubizolles <j.cubizolles@free.fr>
To: Dan Williams <dcbw@redhat.com>
Cc: Amitkumar Karwar <akarwar@marvell.com>,
"linux-wireless\@vger.kernel.org"
<linux-wireless@vger.kernel.org>
Subject: Re: mwifiex problem: incompatible network settings
Date: Wed, 28 Oct 2015 22:38:38 +0100 [thread overview]
Message-ID: <87vb9qsmg1.fsf@free.fr> (raw)
In-Reply-To: <1446043853.24757.51.camel@redhat.com> (Dan Williams's message of "Wed, 28 Oct 2015 09:50:53 -0500")
Dan Williams <dcbw@redhat.com> writes:
> He actually meant the wpa_supplicant configuration file, not the
> supplicant's dbus config file. But when driven by NetworkManager, there
> is no supplicant configuration file.
Sorry about that.
> Instead, you can find out what config NM is pushing to the supplicant by
> checking the NetworkManager logs, where NM will log lines like:
Here are the relevant entries from the syslog file:
I included the failed attempt to connect to the WPA protected network
named "southcentral" and the successful one to a non protected one named
"FreeWifi".
--8<---------------cut here---------------start------------->8---
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): Activation: starting connection 'southcentral' (4c475300-8ffd-4dda-8445-bbd3a9cdc538)
Oct 28 22:27:17 touco dbus[675]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Oct 28 22:27:17 touco NetworkManager[656]: <warn> Connection disconnected (reason -3)
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: completed -> disconnected
Oct 28 22:27:17 touco systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 28 22:27:17 touco NetworkManager[656]: <warn> Connection disconnected (reason 3)
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): Activation: (wifi) access point 'southcentral' has security, but secrets are required.
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: config -> need-auth (reason 'none') [50 60 0]
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 28 22:27:17 touco NetworkManager[656]: <info> (wlx6045bdf646b4): Activation: (wifi) connection 'southcentral' has security, and secrets exist. No new secrets needed.
Oct 28 22:27:17 touco NetworkManager[656]: <info> Config: added 'ssid' value 'southcentral'
Oct 28 22:27:17 touco NetworkManager[656]: <info> Config: added 'scan_ssid' value '1'
Oct 28 22:27:17 touco NetworkManager[656]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Oct 28 22:27:17 touco NetworkManager[656]: <info> Config: added 'psk' value '<omitted>'
Oct 28 22:27:17 touco NetworkManager[656]: <info> Config: set interface ap_scan to 1
Oct 28 22:27:17 touco dbus[675]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 28 22:27:17 touco nm-dispatcher: Dispatching action 'down' for wlx6045bdf646b4
Oct 28 22:27:17 touco systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 28 22:27:19 touco ntpd[5268]: Deleting interface #7 wlx6045bdf646b4, fe80::6245:bdff:fef6:46b4#123, interface stats: received=0, sent=0, dropped=0, active_time=732 secs
Oct 28 22:27:19 touco ntpd[5268]: Deleting interface #3 wlx6045bdf646b4, 10.2.45.69#123, interface stats: received=0, sent=0, dropped=0, active_time=732 secs
Oct 28 22:27:19 touco ntpd[5268]: peers refreshed
Oct 28 22:27:21 touco wpa_supplicant[800]: wlx6045bdf646b4: Trying to associate with f4:ca:e5:ef:be:18 (SSID='southcentral' freq=2462 MHz)
Oct 28 22:27:21 touco wpa_supplicant[800]: wlx6045bdf646b4: CTRL-EVENT-ASSOC-REJECT status_code=1
Oct 28 22:27:21 touco kernel: [ 1755.971734] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
Oct 28 22:27:21 touco kernel: [ 1755.971755] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
Oct 28 22:27:21 touco kernel: [ 1755.971760] usb 1-3: Incompatible network settings
Oct 28 22:27:21 touco kernel: [ 1755.971766] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
Oct 28 22:27:21 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: disconnected -> scanning
Oct 28 22:27:22 touco wpa_supplicant[800]: wlx6045bdf646b4: CTRL-EVENT-REGDOM-CHANGE init=BEACON_HINT type=UNKNOWN
Oct 28 22:27:25 touco wpa_supplicant[800]: wlx6045bdf646b4: Trying to associate with f4:ca:e5:ef:be:18 (SSID='southcentral' freq=2462 MHz)
Oct 28 22:27:25 touco wpa_supplicant[800]: wlx6045bdf646b4: CTRL-EVENT-ASSOC-REJECT status_code=1
Oct 28 22:27:25 touco kernel: [ 1760.400746] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
Oct 28 22:27:25 touco kernel: [ 1760.400757] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
Oct 28 22:27:25 touco kernel: [ 1760.400759] usb 1-3: Incompatible network settings
Oct 28 22:27:25 touco kernel: [ 1760.400762] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
Oct 28 22:27:25 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: scanning -> disconnected
Oct 28 22:27:26 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: disconnected -> scanning
Oct 28 22:27:30 touco wpa_supplicant[800]: wlx6045bdf646b4: Trying to associate with f4:ca:e5:ef:be:18 (SSID='southcentral' freq=2462 MHz)
Oct 28 22:27:30 touco wpa_supplicant[800]: wlx6045bdf646b4: CTRL-EVENT-ASSOC-REJECT status_code=1
Oct 28 22:27:30 touco wpa_supplicant[800]: wlx6045bdf646b4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="southcentral" auth_failures=1 duration=10 reason=CONN_FAILED
Oct 28 22:27:30 touco kernel: [ 1765.252338] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
Oct 28 22:27:30 touco kernel: [ 1765.252355] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
Oct 28 22:27:30 touco kernel: [ 1765.252359] usb 1-3: Incompatible network settings
Oct 28 22:27:30 touco kernel: [ 1765.252362] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
Oct 28 22:27:30 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: scanning -> disconnected
Oct 28 22:27:35 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: disconnected -> scanning
Oct 28 22:27:42 touco NetworkManager[656]: <warn> (wlx6045bdf646b4): Activation: (wifi) association took too long, failing activation
Oct 28 22:27:42 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: config -> failed (reason 'ssid-not-found') [50 120 53]
Oct 28 22:27:42 touco NetworkManager[656]: <info> Connection 'southcentral' failed to autoconnect; 3 tries left
Oct 28 22:27:42 touco NetworkManager[656]: <warn> (wlx6045bdf646b4): Activation: failed for connection 'southcentral'
Oct 28 22:27:42 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: failed -> disconnected (reason 'none') [120 30 0]
Oct 28 22:27:42 touco kernel: [ 1777.784238] IPv6: ADDRCONF(NETDEV_UP): wlx6045bdf646b4: link is not ready
Oct 28 22:27:42 touco NetworkManager[656]: <info> Device 'wlx6045bdf646b4' has no connection; scheduling activate_check in 0 seconds.
Oct 28 22:27:42 touco NetworkManager[656]: <warn> Failed to GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not connected: disconnect.
Oct 28 22:27:42 touco NetworkManager[656]: (NetworkManager:656): GLib-CRITICAL **: Source ID 2796 was not found when attempting to remove it
Oct 28 22:27:42 touco NetworkManager[656]: <info> Auto-activating connection 'FreeWifi'.
Oct 28 22:27:42 touco NetworkManager[656]: <info> (wlx6045bdf646b4): Activation: starting connection 'FreeWifi' (0d348d83-b3b0-4ea0-894d-7b3a9e295392)
Oct 28 22:27:42 touco NetworkManager[656]: <warn> Failed to GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not connected: disconnect.
Oct 28 22:27:42 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 28 22:27:42 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 28 22:27:42 touco NetworkManager[656]: <info> (wlx6045bdf646b4): Activation: (wifi) connection 'FreeWifi' requires no security. No secrets needed.
Oct 28 22:27:42 touco NetworkManager[656]: <info> Config: added 'ssid' value 'FreeWifi'
Oct 28 22:27:42 touco NetworkManager[656]: <info> Config: added 'scan_ssid' value '1'
Oct 28 22:27:42 touco NetworkManager[656]: <info> Config: added 'key_mgmt' value 'NONE'
Oct 28 22:27:42 touco NetworkManager[656]: <warn> Failed to GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not connected: disconnect.
Oct 28 22:27:42 touco NetworkManager[656]: <info> Config: set interface ap_scan to 1
Oct 28 22:27:46 touco wpa_supplicant[800]: wlx6045bdf646b4: Trying to associate with f4:ca:e5:ef:be:19 (SSID='FreeWifi' freq=2462 MHz)
Oct 28 22:27:46 touco kernel: [ 1781.642487] usb 1-3: info: trying to associate to 'FreeWifi' bssid f4:ca:e5:ef:be:19
Oct 28 22:27:46 touco kernel: [ 1781.657394] usb 1-3: info: associated to bssid f4:ca:e5:ef:be:19 successfully
Oct 28 22:27:46 touco kernel: [ 1781.657454] IPv6: ADDRCONF(NETDEV_CHANGE): wlx6045bdf646b4: link becomes ready
Oct 28 22:27:46 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: scanning -> associating
Oct 28 22:27:46 touco wpa_supplicant[800]: wlx6045bdf646b4: Associated with f4:ca:e5:ef:be:19
Oct 28 22:27:46 touco wpa_supplicant[800]: wlx6045bdf646b4: CTRL-EVENT-CONNECTED - Connection to f4:ca:e5:ef:be:19 completed [id=0 id_str=]
Oct 28 22:27:46 touco wpa_supplicant[800]: WMM AC: Missing IEs
Oct 28 22:27:46 touco NetworkManager[656]: <info> (wlx6045bdf646b4): supplicant interface state: associating -> completed
Oct 28 22:27:46 touco NetworkManager[656]: <info> (wlx6045bdf646b4): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FreeWifi'.
Oct 28 22:27:46 touco NetworkManager[656]: <info> (wlx6045bdf646b4): device state change: config -> ip-config (reason 'none') [50 70 0]
Oct 28 22:27:46 touco NetworkManager[656]: <info> Activation (wlx6045bdf646b4) Beginning DHCPv4 transaction (timeout in 45 seconds)
Oct 28 22:27:46 touco NetworkManager[656]: <info> dhclient started with pid 5557
Oct 28 22:27:46 touco dhclient: DHCPREQUEST of 10.2.45.69 on wlx6045bdf646b4 to 255.255.255.255 port 67 (xid=0x4a227e1)
Oct 28 22:27:46 touco dhclient: DHCPACK of 10.2.45.69 from 10.7.255.252
Oct 28 22:27:46 touco NetworkManager[656]: <info> address 10.2.45.69
Oct 28 22:27:46 touco NetworkManager[656]: <info> plen 13 (255.248.0.0)
Oct 28 22:27:46 touco NetworkManager[656]: <info> gateway 10.7.255.254
Oct 28 22:27:46 touco NetworkManager[656]: <info> server identifier 10.7.255.254
Oct 28 22:27:46 touco NetworkManager[656]: <info> lease time 3600
Oct 28 22:27:46 touco NetworkManager[656]: <info> nameserver '212.27.40.241'
Oct 28 22:27:46 touco NetworkManager[656]: <info> nameserver '212.27.40.240'
Oct 28 22:27:46 touco NetworkManager[656]: <info> (wlx6045bdf646b4):
DHCPv4 state changed unknown -> bound
--8<---------------cut here---------------end--------------->8---
next prev parent reply other threads:[~2015-10-28 21:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-26 15:51 mwifiex problem: incompatible network settings Julien Cubizolles
2015-10-26 16:10 ` Dan Williams
2015-10-26 21:50 ` Julien Cubizolles
2015-10-27 15:11 ` Dan Williams
2015-10-27 18:55 ` Amitkumar Karwar
2015-10-27 21:44 ` Julien Cubizolles
2015-10-28 14:50 ` Dan Williams
2015-10-28 21:38 ` Julien Cubizolles [this message]
2015-10-29 12:27 ` Amitkumar Karwar
2015-10-29 15:16 ` Dan Williams
2015-10-30 10:34 ` Amitkumar Karwar
2015-11-04 22:04 ` Julien Cubizolles
2015-11-05 8:59 ` Amitkumar Karwar
2015-11-07 7:38 ` Julien Cubizolles
2015-11-25 14:22 ` Amitkumar Karwar
2015-12-01 10:35 ` Julien Cubizolles
2015-12-01 10:36 ` Amitkumar Karwar
-- strict thread matches above, loose matches on Subject: below --
2015-10-29 14:29 Ujjal Roy
2015-10-30 10:27 ` Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vb9qsmg1.fsf@free.fr \
--to=j.cubizolles@free.fr \
--cc=akarwar@marvell.com \
--cc=dcbw@redhat.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.