From: Jani Nikula <jani.nikula@intel.com>
To: Vandita Kulkarni <vandita.kulkarni@intel.com>,
intel-gfx@lists.freedesktop.org
Cc: ville.syrjala@intel.com
Subject: Re: [v5 1/4] drm/i915: Fix the pipe state timing mismatch warnings
Date: Tue, 14 May 2019 10:38:37 +0300 [thread overview]
Message-ID: <87woitjxj6.fsf@intel.com> (raw)
In-Reply-To: <1556809862-31203-1-git-send-email-vandita.kulkarni@intel.com>
On Thu, 02 May 2019, Vandita Kulkarni <vandita.kulkarni@intel.com> wrote:
> Adjust the get transcoder timings for mipi dsi as per the
> set timing calculations.
>
> v2: Use the existing intel_get_pipe_timings and do the dsi
> specific adjustments in the encoder get_config hook.(Ville, Jani)
>
> v3: Exclude VBLANK and HBLANK registers for dsi transcoder.
>
> v4: Fix the incomplete conditional logic.
>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Pushed the series, thanks for the patches.
BR,
Jani.
> ---
> drivers/gpu/drm/i915/icl_dsi.c | 29 +++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++------
> 2 files changed, 45 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
> index c6ecc00..45fe69c 100644
> --- a/drivers/gpu/drm/i915/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/icl_dsi.c
> @@ -1194,6 +1194,34 @@ static void gen11_dsi_disable(struct intel_encoder *encoder,
> gen11_dsi_disable_io_power(encoder);
> }
>
> +static void gen11_dsi_get_timings(struct intel_encoder *encoder,
> + struct intel_crtc_state *pipe_config)
> +{
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + struct drm_display_mode *adjusted_mode =
> + &pipe_config->base.adjusted_mode;
> +
> + if (intel_dsi->dual_link) {
> + adjusted_mode->crtc_hdisplay *= 2;
> + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
> + adjusted_mode->crtc_hdisplay -=
> + intel_dsi->pixel_overlap;
> + adjusted_mode->crtc_htotal *= 2;
> + }
> + adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
> + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
> +
> + if (intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE) {
> + if (intel_dsi->dual_link) {
> + adjusted_mode->crtc_hsync_start *= 2;
> + adjusted_mode->crtc_hsync_end *= 2;
> + }
> + }
> + adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
> + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
> +
> +}
> +
> static void gen11_dsi_get_config(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config)
> {
> @@ -1204,6 +1232,7 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
> pipe_config->port_clock =
> cnl_calc_wrpll_link(dev_priv, &pipe_config->dpll_hw_state);
> pipe_config->base.adjusted_mode.crtc_clock = intel_dsi->pclk;
> + gen11_dsi_get_timings(encoder, pipe_config);
> pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index dd65d7c..c8cfddc 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7736,9 +7736,14 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
> tmp = I915_READ(HTOTAL(cpu_transcoder));
> pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
> pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
> - tmp = I915_READ(HBLANK(cpu_transcoder));
> - pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
> - pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
> +
> + if (!transcoder_is_dsi(cpu_transcoder)) {
> + tmp = I915_READ(HBLANK(cpu_transcoder));
> + pipe_config->base.adjusted_mode.crtc_hblank_start =
> + (tmp & 0xffff) + 1;
> + pipe_config->base.adjusted_mode.crtc_hblank_end =
> + ((tmp >> 16) & 0xffff) + 1;
> + }
> tmp = I915_READ(HSYNC(cpu_transcoder));
> pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
> pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
> @@ -7746,9 +7751,14 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
> tmp = I915_READ(VTOTAL(cpu_transcoder));
> pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
> pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
> - tmp = I915_READ(VBLANK(cpu_transcoder));
> - pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
> - pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
> +
> + if (!transcoder_is_dsi(cpu_transcoder)) {
> + tmp = I915_READ(VBLANK(cpu_transcoder));
> + pipe_config->base.adjusted_mode.crtc_vblank_start =
> + (tmp & 0xffff) + 1;
> + pipe_config->base.adjusted_mode.crtc_vblank_end =
> + ((tmp >> 16) & 0xffff) + 1;
> + }
> tmp = I915_READ(VSYNC(cpu_transcoder));
> pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
> pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2019-05-14 7:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-02 15:10 [v5 1/4] drm/i915: Fix the pipe state timing mismatch warnings Vandita Kulkarni
2019-05-02 15:11 ` [v5 2/4] drm/i915: Refactor bdw_get_pipemisc_bpp Vandita Kulkarni
2019-05-02 15:11 ` [v5 3/4] drm/i915: Fix pipe config mismatch for bpp, output format Vandita Kulkarni
2019-05-02 15:11 ` [v5 4/4] drm/i915: Fix pixel clock and crtc clock config mismatch Vandita Kulkarni
2019-05-02 19:30 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [v5,1/4] drm/i915: Fix the pipe state timing mismatch warnings Patchwork
2019-05-02 19:59 ` ✓ Fi.CI.BAT: success " Patchwork
2019-05-03 2:00 ` ✓ Fi.CI.IGT: " Patchwork
2019-05-14 7:38 ` Jani Nikula [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87woitjxj6.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=vandita.kulkarni@intel.com \
--cc=ville.syrjala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.