From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1g9V9d-0001Jm-Ep for ath10k@lists.infradead.org; Mon, 08 Oct 2018 13:01:11 +0000 From: Kalle Valo Subject: Re: ath10k-firmware: QCA9984 hw1.0: Add Netgear Orbi Pro SRK60 specific BDFs References: Date: Mon, 08 Oct 2018 16:00:42 +0300 In-Reply-To: (Robert Marko's message of "Sun, 2 Sep 2018 13:25:04 +0200") Message-ID: <87woqsd24l.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Robert Marko Cc: ath10k@lists.infradead.org Robert Marko writes: > I am currently working on the Netgear Orbi Pro SRK60 support for > OpenWrt. This > AP requires three special BDFs to get the Wi-Fi PHYs working (correctly). The > bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because > QCA doesn't provide special IDs for customers and seems to use the AP-DK > board-ids in the wifi firmware to change its behavior. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a QCA4019 based module (based on qcom-ipq4019-ap.dk04.1-c1) > - one QCA4019 radio is used as 2.4GHz radio > - one QCA4019 radio is used as 5GHz radio > - an additional QCA9984 5GHz radio is attached via PCI > > * origin of the board file (did you create it yourself or where you > downloaded) > > - it was pulled from the factory firmware image > - it is based on latest 2.1.4.16 firmware > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA9984 hw1.0 > > + bus=pci,bmi-chip-id=0,bmi-board-id=6,variant=Netgear-Orbi-Pro-SRK60 > md5sum: > 1725321919ee4dac521db1b3253c8f8d > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") Added, thanks. Please double check my changes: https://github.com/kvalo/ath10k-firmware/commit/b4cf08bbce8c3b9ef9a5a7248a800e40beed5b2d -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k