From: Jerry Snitselaar <jsnitsel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [PATCH v1] tpm/st33zp24: Add GPIO ACPI mapping table
Date: Wed, 15 Mar 2017 14:21:02 -0700 [thread overview]
Message-ID: <87wpbqw81t.fsf@redhat.com> (raw)
In-Reply-To: 20170313173811.21668-1-andriy.shevchenko@linux.intel.com
Andy Shevchenko @ 2017-03-13 19:38 +0200:
> In order to make GPIO ACPI library stricter prepare users of
> gpiod_get_index() to correctly behave when there no mapping is
> provided by firmware.
>
> Here we add explicit mapping between _CRS GpioIo() resources and
> their names used in the driver.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> ---
> drivers/char/tpm/st33zp24/i2c.c | 23 ++++++++++++++++++++---
> drivers/char/tpm/st33zp24/spi.c | 23 ++++++++++++++++++++---
> 2 files changed, 40 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c
> index 028a9cd76b63..349fc72447a1 100644
> --- a/drivers/char/tpm/st33zp24/i2c.c
> +++ b/drivers/char/tpm/st33zp24/i2c.c
> @@ -111,6 +111,13 @@ static const struct st33zp24_phy_ops i2c_phy_ops = {
> .recv = st33zp24_i2c_recv,
> };
>
> +static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false };
> +
> +static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = {
> + { "lpcpd-gpios", &lpcpd_gpios, 1 },
> + {},
> +};
> +
> static int st33zp24_i2c_acpi_request_resources(struct i2c_client *client)
> {
> struct tpm_chip *chip = i2c_get_clientdata(client);
> @@ -118,10 +125,14 @@ static int st33zp24_i2c_acpi_request_resources(struct i2c_client *client)
> struct st33zp24_i2c_phy *phy = tpm_dev->phy_id;
> struct gpio_desc *gpiod_lpcpd;
> struct device *dev = &client->dev;
> + int ret;
> +
> + ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_st33zp24_gpios);
> + if (ret)
> + return ret;
>
> /* Get LPCPD GPIO from ACPI */
> - gpiod_lpcpd = devm_gpiod_get_index(dev, "TPM IO LPCPD", 1,
> - GPIOD_OUT_HIGH);
> + gpiod_lpcpd = devm_gpiod_get(dev, "lpcpd", GPIOD_OUT_HIGH);
> if (IS_ERR(gpiod_lpcpd)) {
> dev_err(&client->dev,
> "Failed to retrieve lpcpd-gpios from acpi.\n");
> @@ -268,8 +279,14 @@ static int st33zp24_i2c_probe(struct i2c_client *client,
> static int st33zp24_i2c_remove(struct i2c_client *client)
> {
> struct tpm_chip *chip = i2c_get_clientdata(client);
> + int ret;
>
> - return st33zp24_remove(chip);
> + ret = st33zp24_remove(chip);
> + if (ret)
> + return ret;
> +
> + acpi_dev_remove_driver_gpios(ACPI_COMPANION(&dev->dev));
> + return 0;
> }
&chip->dev instead of &dev->dev ?
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
prev parent reply other threads:[~2017-03-15 21:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-13 17:38 [PATCH v1] tpm/st33zp24: Add GPIO ACPI mapping table Andy Shevchenko
[not found] ` <20170313173811.21668-1-andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-03-15 8:28 ` Jarkko Sakkinen
[not found] ` <20170315082828.7cuwlrcmyqwfijbo-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-03-16 14:03 ` Andy Shevchenko
2017-03-15 21:21 ` Jerry Snitselaar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wpbqw81t.fsf@redhat.com \
--to=jsnitsel-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.