From: Rusty Russell <rusty@rustcorp.com.au>
To: Stephen Hemminger <stephen@networkplumber.org>,
Alex Williamson <alex.williamson@hp.com>,
"Michael S. Tsirkin" <mst@redhat.com>
Cc: netdev@vger.kernel.org
Subject: Re: [RFC] virtio_net: multicast address list never sent to host
Date: Sat, 07 Dec 2013 11:12:44 +1030 [thread overview]
Message-ID: <87wqjh4hkr.fsf@rustcorp.com.au> (raw)
In-Reply-To: <20131205152052.064319c9@nehalam.linuxnetplumber.net>
Stephen Hemminger <stephen@networkplumber.org> writes:
> The virtio_net driver never sends the second address list to
> the host. This is because send command takes a pointer to scatter list
> to send but only inserts that one entry into the scatter list that
> is sent to the host.
>
> This bug has been there since:
> commit f565a7c259d71cc186753653d978c646d2354b36
> Author: Alex Williamson <alex.williamson@hp.com>
> Date: Wed Feb 4 09:02:45 2009 +0000
>
> virtio_net: Add a MAC filter table
>
>
> I also dropped the in argument since it is never used.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Ouch. Took me a while to untangle the two changes (arg change and the
VIRTIO_NET_CTRL_MAC_TABLE_SET change which is the actual fix), but it
looks good.
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks!
Rusty.
> --- a/drivers/net/virtio_net.c 2013-12-05 15:11:34.000000000 -0800
> +++ b/drivers/net/virtio_net.c 2013-12-05 15:17:16.211568831 -0800
> @@ -877,16 +877,16 @@ static netdev_tx_t start_xmit(struct sk_
> * never fail unless improperly formated.
> */
> static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
> - struct scatterlist *out,
> - struct scatterlist *in)
> + struct scatterlist *out, unsigned out_cnt)
> {
> struct scatterlist *sgs[4], hdr, stat;
> struct virtio_net_ctrl_hdr ctrl;
> virtio_net_ctrl_ack status = ~0;
> - unsigned out_num = 0, in_num = 0, tmp;
> + unsigned out_num = 0, tmp;
>
> /* Caller should know better */
> BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ));
> + BUG_ON(out_cnt > 2);
>
> ctrl.class = class;
> ctrl.cmd = cmd;
> @@ -894,17 +894,14 @@ static bool virtnet_send_command(struct
> sg_init_one(&hdr, &ctrl, sizeof(ctrl));
> sgs[out_num++] = &hdr;
>
> - if (out)
> - sgs[out_num++] = out;
> - if (in)
> - sgs[out_num + in_num++] = in;
> + while (out_cnt-- > 0)
> + sgs[out_num++] = out++;
>
> /* Add return status. */
> sg_init_one(&stat, &status, sizeof(status));
> - sgs[out_num + in_num++] = &stat;
> + sgs[out_num] = &stat;
>
> - BUG_ON(out_num + in_num > ARRAY_SIZE(sgs));
> - BUG_ON(virtqueue_add_sgs(vi->cvq, sgs, out_num, in_num, vi, GFP_ATOMIC)
> + BUG_ON(virtqueue_add_sgs(vi->cvq, sgs, out_num, 1, vi, GFP_ATOMIC)
> < 0);
>
> if (unlikely(!virtqueue_kick(vi->cvq)))
> @@ -936,7 +933,7 @@ static int virtnet_set_mac_address(struc
> sg_init_one(&sg, addr->sa_data, dev->addr_len);
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
> VIRTIO_NET_CTRL_MAC_ADDR_SET,
> - &sg, NULL)) {
> + &sg, 1)) {
> dev_warn(&vdev->dev,
> "Failed to set mac address by vq command.\n");
> return -EINVAL;
> @@ -1009,7 +1006,7 @@ static void virtnet_ack_link_announce(st
> {
> rtnl_lock();
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_ANNOUNCE,
> - VIRTIO_NET_CTRL_ANNOUNCE_ACK, NULL, NULL))
> + VIRTIO_NET_CTRL_ANNOUNCE_ACK, NULL, 0))
> dev_warn(&vi->dev->dev, "Failed to ack link announce.\n");
> rtnl_unlock();
> }
> @@ -1027,7 +1024,7 @@ static int virtnet_set_queues(struct vir
> sg_init_one(&sg, &s, sizeof(s));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MQ,
> - VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET, &sg, NULL)) {
> + VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET, &sg, 1)) {
> dev_warn(&dev->dev, "Fail to set num of queue pairs to %d\n",
> queue_pairs);
> return -EINVAL;
> @@ -1078,7 +1075,7 @@ static void virtnet_set_rx_mode(struct n
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
> VIRTIO_NET_CTRL_RX_PROMISC,
> - sg, NULL))
> + sg, 1))
> dev_warn(&dev->dev, "Failed to %sable promisc mode.\n",
> promisc ? "en" : "dis");
>
> @@ -1086,7 +1083,7 @@ static void virtnet_set_rx_mode(struct n
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
> VIRTIO_NET_CTRL_RX_ALLMULTI,
> - sg, NULL))
> + sg, 1))
> dev_warn(&dev->dev, "Failed to %sable allmulti mode.\n",
> allmulti ? "en" : "dis");
>
> @@ -1123,7 +1120,7 @@ static void virtnet_set_rx_mode(struct n
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
> VIRTIO_NET_CTRL_MAC_TABLE_SET,
> - sg, NULL))
> + sg, 2))
> dev_warn(&dev->dev, "Failed to set MAC filter table.\n");
>
> kfree(buf);
> @@ -1138,7 +1135,7 @@ static int virtnet_vlan_rx_add_vid(struc
> sg_init_one(&sg, &vid, sizeof(vid));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
> - VIRTIO_NET_CTRL_VLAN_ADD, &sg, NULL))
> + VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1))
> dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
> return 0;
> }
> @@ -1152,7 +1149,7 @@ static int virtnet_vlan_rx_kill_vid(stru
> sg_init_one(&sg, &vid, sizeof(vid));
>
> if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
> - VIRTIO_NET_CTRL_VLAN_DEL, &sg, NULL))
> + VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1))
> dev_warn(&dev->dev, "Failed to kill VLAN ID %d.\n", vid);
> return 0;
> }
next prev parent reply other threads:[~2013-12-07 1:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-05 23:20 [RFC] virtio_net: multicast address list never sent to host Stephen Hemminger
2013-12-06 14:38 ` Vlad Yasevich
2013-12-06 22:51 ` Stephen Hemminger
2013-12-07 1:37 ` Vlad Yasevich
2013-12-07 0:42 ` Rusty Russell [this message]
2013-12-08 12:35 ` Michael S. Tsirkin
2013-12-08 19:43 ` Stephen Hemminger
2013-12-10 8:22 ` Amos Kong
2013-12-16 7:52 ` Amos Kong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wqjh4hkr.fsf@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=alex.williamson@hp.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.