diff for duplicates of <87wrqg2xog.fsf@deeprootsystems.com> diff --git a/a/1.txt b/N1/1.txt index ea730cd..2f6e59c 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -18,14 +18,14 @@ Govindraj <govindraj.ti@gmail.com> writes: >> boards, specifically 3630-based boards. >> >> First, due to the current UART idle code base, you need to enable all ->> OMAP UARTs 36xx. Enabling less than all OMAP UARTs will break the ->> current idle code. As we discussed, the next phase we will move the +>> OMAP UARTs 36xx. ?Enabling less than all OMAP UARTs will break the +>> current idle code. ?As we discussed, the next phase we will move the >> idle management from this serial.c hackery into the omap-serial driver ->> iteself. Until then, you need to call omap_serial_init() on ->> Zoom2/Zoom3. Patch below[1] +>> iteself. ?Until then, you need to call omap_serial_init() on +>> Zoom2/Zoom3. ?Patch below[1] >> >> Also, you previously had a patch that updated omap_uart_idle_init() to ->> handle 36xx and specifically UART4. Without that, struct +>> handle 36xx and specifically UART4. ?Without that, struct >> omap_uart_state is not setup correctly for UART4, and thus cannot be >> properly idled on 3630. > @@ -46,9 +46,9 @@ pending request for you to drop the muxmode from that patch, but the rest of it was still needed. >> ->> Also, it's been a while since I tested this on OMAP2. Please re-test on ->> OMAP2 with the whole series. Also, please report here the other ->> platforms this was tested on. The final needs to be tested on OMAP2, 3 +>> Also, it's been a while since I tested this on OMAP2. ?Please re-test on +>> OMAP2 with the whole series. ?Also, please report here the other +>> platforms this was tested on. ?The final needs to be tested on OMAP2, 3 >> and 4 before merge. > > Yes Sure, @@ -62,8 +62,3 @@ soon as idle was enabled due to the missing init of all UARTs. Thanks, Kevin - --- -To unsubscribe from this list: send the line "unsubscribe linux-omap" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 76606c8..20b40e3 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,15 +1,10 @@ "ref\013965.10.24.255.18.1284739547.squirrel@dbdmail.itg.ti.com\0" "ref\087tylorl9i.fsf@deeprootsystems.com\0" "ref\0AANLkTik-+RC7y=dJnDdxzrqMFnTzRV-j8s5FtmMy8ZhE@mail.gmail.com\0" - "From\0Kevin Hilman <khilman@deeprootsystems.com>\0" - "Subject\0Re: [PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support\0" + "From\0khilman@deeprootsystems.com (Kevin Hilman)\0" + "Subject\0[PATCH 00/11] OMAP: Serial: Add omap-serial driver with platform support\0" "Date\0Mon, 20 Sep 2010 09:21:19 -0700\0" - "To\0Govindraj <govindraj.ti@gmail.com>\0" - "Cc\0Govindraj.R <govindraj.raja@ti.com>" - linux-omap@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-serial@vger.kernel.org - " Tony Lindgren <tony@atomide.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Govindraj <govindraj.ti@gmail.com> writes:\n" @@ -32,14 +27,14 @@ ">> boards, specifically 3630-based boards.\n" ">>\n" ">> First, due to the current UART idle code base, you need to enable all\n" - ">> OMAP UARTs 36xx. \302\240Enabling less than all OMAP UARTs will break the\n" - ">> current idle code. \302\240As we discussed, the next phase we will move the\n" + ">> OMAP UARTs 36xx. ?Enabling less than all OMAP UARTs will break the\n" + ">> current idle code. ?As we discussed, the next phase we will move the\n" ">> idle management from this serial.c hackery into the omap-serial driver\n" - ">> iteself. \302\240Until then, you need to call omap_serial_init() on\n" - ">> Zoom2/Zoom3. \302\240Patch below[1]\n" + ">> iteself. ?Until then, you need to call omap_serial_init() on\n" + ">> Zoom2/Zoom3. ?Patch below[1]\n" ">>\n" ">> Also, you previously had a patch that updated omap_uart_idle_init() to\n" - ">> handle 36xx and specifically UART4. \302\240Without that, struct\n" + ">> handle 36xx and specifically UART4. ?Without that, struct\n" ">> omap_uart_state is not setup correctly for UART4, and thus cannot be\n" ">> properly idled on 3630.\n" ">\n" @@ -60,9 +55,9 @@ "rest of it was still needed.\n" "\n" ">>\n" - ">> Also, it's been a while since I tested this on OMAP2. \302\240Please re-test on\n" - ">> OMAP2 with the whole series. \302\240Also, please report here the other\n" - ">> platforms this was tested on. \302\240The final needs to be tested on OMAP2, 3\n" + ">> Also, it's been a while since I tested this on OMAP2. ?Please re-test on\n" + ">> OMAP2 with the whole series. ?Also, please report here the other\n" + ">> platforms this was tested on. ?The final needs to be tested on OMAP2, 3\n" ">> and 4 before merge.\n" ">\n" "> Yes Sure,\n" @@ -75,11 +70,6 @@ "\n" "Thanks,\n" "\n" - "Kevin\n" - "\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe linux-omap\" in\n" - "the body of a message to majordomo@vger.kernel.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + Kevin -658f1aef9d646e064b1ca1b8f9ba01753cd1e906acca37233559824aef5a9b71 +92f02ea8bcebf2a30e10a6820c8eb877f28c1bd3ec8c29dd239d680b21b0ee96
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.