From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [PATCH v3 02/34] KVM: x86: hyper-v: Introduce TLB flush ring
Date: Mon, 16 May 2022 16:29:42 +0200 [thread overview]
Message-ID: <87y1z1v9d5.fsf@redhat.com> (raw)
In-Reply-To: <fdcba8b4aed2956e9bfc92ada2170f481a85a362.camel@redhat.com>
Maxim Levitsky <mlevitsk@redhat.com> writes:
> On Thu, 2022-04-14 at 15:19 +0200, Vitaly Kuznetsov wrote:
>> To allow flushing individual GVAs instead of always flushing the whole
>> VPID a per-vCPU structure to pass the requests is needed. Introduce a
>> simple ring write-locked structure to hold two types of entries:
>> individual GVA (GFN + up to 4095 following GFNs in the lower 12 bits)
>> and 'flush all'.
>>
>> The queuing rule is: if there's not enough space on the ring to put
>> the request and leave at least 1 entry for 'flush all' - put 'flush
>> all' entry.
>>
>> The size of the ring is arbitrary set to '16'.
>>
>> Note, kvm_hv_flush_tlb() only queues 'flush all' entries for now so
>> there's very small functional change but the infrastructure is
>> prepared to handle individual GVA flush requests.
>
> As I see from this patch, also the code doesn't process the requests
> from the ring buffer yet, but rather just ignores it completely,
> and resets the whole ring buffer (kvm_hv_vcpu_empty_flush_tlb)
> Maybe you should mention it here.
>
>
>>
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>> arch/x86/include/asm/kvm_host.h | 16 +++++++
>> arch/x86/kvm/hyperv.c | 83 +++++++++++++++++++++++++++++++++
>> arch/x86/kvm/hyperv.h | 13 ++++++
>> arch/x86/kvm/x86.c | 5 +-
>> arch/x86/kvm/x86.h | 1 +
>> 5 files changed, 116 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
>> index 1de3ad9308d8..b4dd2ff61658 100644
>> --- a/arch/x86/include/asm/kvm_host.h
>> +++ b/arch/x86/include/asm/kvm_host.h
>> @@ -578,6 +578,20 @@ struct kvm_vcpu_hv_synic {
>> bool dont_zero_synic_pages;
>> };
>>
>> +#define KVM_HV_TLB_FLUSH_RING_SIZE (16)
>> +
>> +struct kvm_vcpu_hv_tlb_flush_entry {
>> + u64 addr;
>> + u64 flush_all:1;
>> + u64 pad:63;
>> +};
>
> Have you considered using kfifo.h library instead?
>
As a matter of fact I have not and this is a good suggestion,
actually. Let me try to use it instead of my home-brewed ring. I'll
address your other comments after that. Thanks!
--
Vitaly
next prev parent reply other threads:[~2022-05-16 14:29 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-14 13:19 [PATCH v3 00/34] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush feature Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 01/34] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-05-11 11:18 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 02/34] KVM: x86: hyper-v: Introduce TLB flush ring Vitaly Kuznetsov
2022-05-11 11:19 ` Maxim Levitsky
2022-05-16 14:29 ` Vitaly Kuznetsov [this message]
2022-05-16 19:34 ` Sean Christopherson
2022-05-17 13:31 ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 03/34] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-05-11 11:20 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 04/34] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-05-11 11:22 ` Maxim Levitsky
2022-05-18 9:39 ` Vitaly Kuznetsov
2022-05-18 14:18 ` Sean Christopherson
2022-05-18 14:43 ` Vitaly Kuznetsov
2022-05-18 14:55 ` Sean Christopherson
2022-05-16 19:41 ` Sean Christopherson
2022-05-17 13:41 ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 05/34] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-05-11 11:23 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 06/34] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-05-11 11:23 ` Maxim Levitsky
2022-05-11 11:23 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 07/34] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-04-25 15:47 ` Wei Liu
2022-04-25 17:34 ` Michael Kelley (LINUX)
2022-04-25 19:09 ` Christophe JAILLET
2022-04-25 19:16 ` Christophe JAILLET
2022-05-03 14:59 ` Vitaly Kuznetsov
2022-05-03 11:11 ` Wei Liu
2022-05-11 11:23 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 08/34] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-05-11 11:24 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 09/34] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-05-11 11:24 ` Maxim Levitsky
2022-05-16 19:52 ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 10/34] KVM: x86: hyper-v: Create a separate ring for L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:24 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 11/34] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-05-11 11:25 ` Maxim Levitsky
2022-05-16 20:05 ` Sean Christopherson
2022-05-17 13:51 ` Vitaly Kuznetsov
2022-05-17 14:04 ` Sean Christopherson
2022-05-17 14:19 ` Vitaly Kuznetsov
2022-04-14 13:19 ` [PATCH v3 12/34] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-05-11 11:25 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 13/34] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-05-11 11:27 ` Maxim Levitsky
2022-05-18 12:25 ` Vitaly Kuznetsov
2022-05-18 12:45 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 14/34] KVM: x86: Introduce .post_hv_l2_tlb_flush() nested hook Vitaly Kuznetsov
2022-05-11 11:32 ` Maxim Levitsky
2022-05-18 12:43 ` Vitaly Kuznetsov
2022-05-18 12:49 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 15/34] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-05-11 11:25 ` Maxim Levitsky
2022-05-16 20:09 ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 16/34] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:29 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 17/34] KVM: x86: hyper-v: Introduce fast kvm_hv_l2_tlb_flush_exposed() check Vitaly Kuznetsov
2022-05-11 11:30 ` Maxim Levitsky
2022-05-19 13:25 ` Vitaly Kuznetsov
2022-05-19 13:28 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 18/34] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-05-11 11:30 ` Maxim Levitsky
2022-04-14 13:19 ` [PATCH v3 19/34] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:31 ` Maxim Levitsky
2022-05-16 20:16 ` Sean Christopherson
2022-04-14 13:19 ` [PATCH v3 20/34] KVM: x86: KVM_REQ_TLB_FLUSH_CURRENT is a superset of KVM_REQ_HV_TLB_FLUSH too Vitaly Kuznetsov
2022-05-11 11:33 ` Maxim Levitsky
2022-05-19 9:12 ` Vitaly Kuznetsov
2022-05-19 23:44 ` Sean Christopherson
2022-04-14 13:20 ` [PATCH v3 21/34] KVM: nSVM: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-05-11 11:33 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 22/34] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-05-11 11:34 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 23/34] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-05-11 11:34 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 24/34] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-05-11 11:35 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 25/34] KVM: selftests: Make it possible to replace PTEs with __virt_pg_map() Vitaly Kuznetsov
2022-05-11 11:34 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 26/34] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-05-24 14:51 ` Vitaly Kuznetsov
2022-04-14 13:20 ` [PATCH v3 27/34] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 28/34] KVM: selftests: nVMX: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 29/34] KVM: selftests: nSVM: Allocate Hyper-V partition assist and VP assist pages Vitaly Kuznetsov
2022-05-11 12:17 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 30/34] KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 31/34] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 32/34] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 33/34] KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-05-11 12:19 ` Maxim Levitsky
2022-04-14 13:20 ` [PATCH v3 34/34] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-05-11 12:18 ` Maxim Levitsky
2022-05-03 15:01 ` [PATCH v3 00/34] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush feature Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y1z1v9d5.fsf@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.