All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Erik Stromdahl <erik.stromdahl@gmail.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: [RFC v3 08/11] ath10k: add QCA9377 usb hw_param item
Date: Fri, 22 Dec 2017 15:49:33 +0000	[thread overview]
Message-ID: <87y3lu9302.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <20170917194013.8658-9-erik.stromdahl@gmail.com> (Erik Stromdahl's message of "Sun, 17 Sep 2017 21:40:10 +0200")

Erik Stromdahl <erik.stromdahl@gmail.com> writes:

> Hardware parameters for QCA9377 usb devices.
>
> Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>

[...]

> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -328,6 +328,29 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
>  		.vht160_mcs_rx_highest = 0,
>  		.vht160_mcs_tx_highest = 0,
>  	},
> +	{
> +		.id = QCA9377_HW_1_1_DEV_VERSION,
> +		.dev_id = QCA9377_1_0_DEVICE_ID,
> +		.name = "qca9377 hw1.1 usb",
> +		.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
> +		.uart_pin = 6,
> +		.otp_exe_param = 0,
> +		.channel_counters_freq_hz = 88000,
> +		.max_probe_resp_desc_thres = 0,
> +		.cal_data_len = 8124,
> +		.fw = {
> +			.dir = QCA9377_HW_1_0_FW_DIR,
> +			.board = QCA9377_HW_1_0_BOARD_DATA_FILE_USB,
> +			.board_size = QCA9377_BOARD_DATA_SZ,
> +			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
> +		},
> +		.hw_ops = &qca988x_ops,
> +		.decap_align_bytes = 4,
> +		.max_num_peers = TARGET_QCA9377_HL_NUM_PEERS,
> +		.is_high_latency = true,
> +		.bus = ATH10K_BUS_USB,
> +		.start_once = true,
> +	},

Oh, forgot to mention that adding hw_params entry should be last in the
patchset and only added once all fixes etc are already in place (eg
patch 10 and 11 should be before this).

-- 
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Erik Stromdahl <erik.stromdahl@gmail.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: [RFC v3 08/11] ath10k: add QCA9377 usb hw_param item
Date: Fri, 22 Dec 2017 15:49:33 +0000	[thread overview]
Message-ID: <87y3lu9302.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <20170917194013.8658-9-erik.stromdahl@gmail.com> (Erik Stromdahl's message of "Sun, 17 Sep 2017 21:40:10 +0200")

Erik Stromdahl <erik.stromdahl@gmail.com> writes:

> Hardware parameters for QCA9377 usb devices.
>
> Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>

[...]

> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -328,6 +328,29 @@ static const struct ath10k_hw_params ath10k_hw_param=
s_list[] =3D {
>  		.vht160_mcs_rx_highest =3D 0,
>  		.vht160_mcs_tx_highest =3D 0,
>  	},
> +	{
> +		.id =3D QCA9377_HW_1_1_DEV_VERSION,
> +		.dev_id =3D QCA9377_1_0_DEVICE_ID,
> +		.name =3D "qca9377 hw1.1 usb",
> +		.patch_load_addr =3D QCA9377_HW_1_0_PATCH_LOAD_ADDR,
> +		.uart_pin =3D 6,
> +		.otp_exe_param =3D 0,
> +		.channel_counters_freq_hz =3D 88000,
> +		.max_probe_resp_desc_thres =3D 0,
> +		.cal_data_len =3D 8124,
> +		.fw =3D {
> +			.dir =3D QCA9377_HW_1_0_FW_DIR,
> +			.board =3D QCA9377_HW_1_0_BOARD_DATA_FILE_USB,
> +			.board_size =3D QCA9377_BOARD_DATA_SZ,
> +			.board_ext_size =3D QCA9377_BOARD_EXT_DATA_SZ,
> +		},
> +		.hw_ops =3D &qca988x_ops,
> +		.decap_align_bytes =3D 4,
> +		.max_num_peers =3D TARGET_QCA9377_HL_NUM_PEERS,
> +		.is_high_latency =3D true,
> +		.bus =3D ATH10K_BUS_USB,
> +		.start_once =3D true,
> +	},

Oh, forgot to mention that adding hw_params entry should be last in the
patchset and only added once all fixes etc are already in place (eg
patch 10 and 11 should be before this).

--=20
Kalle Valo=

  parent reply	other threads:[~2017-12-22 15:49 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-17 19:40 [RFC v3 00/11] ath10k high latency Erik Stromdahl
2017-09-17 19:40 ` Erik Stromdahl
2017-09-17 19:40 ` [RFC v3 01/11] ath10k: high_latency detection Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:06   ` Kalle Valo
2017-12-22 15:06     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 02/11] ath10k: htt: RX ring config HL support Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-09-17 19:40 ` [RFC v3 03/11] ath10k: per target configurablity of various items Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:19   ` Kalle Valo
2017-12-22 15:19     ` Kalle Valo
2017-12-28 12:43     ` Erik Stromdahl
2017-12-28 12:43       ` Erik Stromdahl
2018-01-08 13:41       ` Kalle Valo
2018-01-08 13:41         ` Kalle Valo
2018-01-08 14:03         ` Govind Singh
2018-01-08 14:03           ` Govind Singh
2017-09-17 19:40 ` [RFC v3 04/11] ath10k: add start_once support Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:25   ` Kalle Valo
2017-12-22 15:25     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 05/11] ath10k: htt: High latency TX support Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:26   ` Kalle Valo
2017-12-22 15:26     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 06/11] ath10k: htt: High latency RX support Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:32   ` Kalle Valo
2017-12-22 15:32     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 07/11] ath10k: various fixes for high latency devices Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:43   ` Kalle Valo
2017-12-22 15:43     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 08/11] ath10k: add QCA9377 usb hw_param item Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:46   ` Kalle Valo
2017-12-22 15:46     ` Kalle Valo
2017-12-22 15:49   ` Kalle Valo [this message]
2017-12-22 15:49     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 09/11] ath10k: add QCA9377 sdio " Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:47   ` Kalle Valo
2017-12-22 15:47     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 10/11] ath10k: wmi: disable softirq's while calling ieee80211_rx Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:47   ` Kalle Valo
2017-12-22 15:47     ` Kalle Valo
2017-09-17 19:40 ` [RFC v3 11/11] ath10k: remove htt pending TX count for high latency Erik Stromdahl
2017-09-17 19:40   ` Erik Stromdahl
2017-12-22 15:55 ` [RFC v3 00/11] ath10k " Kalle Valo
2017-12-22 15:55   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87y3lu9302.fsf@kamboji.qca.qualcomm.com \
    --to=kvalo@qca.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=erik.stromdahl@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.