From: Kevin Hilman <khilman@deeprootsystems.com>
To: Rajendra Nayak <rnayak@ti.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH] OMAP3: PM: Scale VDD2 OPP for VDD1 OPP3 and higher
Date: Tue, 16 Dec 2008 11:15:55 -0800 [thread overview]
Message-ID: <87y6yg53tg.fsf@deeprootsystems.com> (raw)
In-Reply-To: <01c901c95f7e$4d854f30$LocalHost@wipultra1382> (Rajendra Nayak's message of "Tue\, 16 Dec 2008 18\:30\:41 +0530")
"Rajendra Nayak" <rnayak@ti.com> writes:
> This patch implements an implicit/internal constraint
> of 100Mhz for L3 bus while the VDD1 OPP is OPP3 or higher.
> The patch also removes the usage of bus_throughput_db
> from SRF.
> Applies on the latest pm branch.
>
> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Thanks, applied to PM branch.
Kevin
> ---
> arch/arm/mach-omap2/pm.c | 6 +++++-
> arch/arm/mach-omap2/resource34xx.c | 37 ++++++++++++++++++++++++++++---------
> arch/arm/mach-omap2/resource34xx.h | 13 -------------
> 3 files changed, 33 insertions(+), 23 deletions(-)
>
> Index: linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/resource34xx.c 2008-12-16 11:11:28.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c 2008-12-16 16:04:43.017689014 +0530
> @@ -146,7 +146,7 @@ void init_opp(struct shared_resource *re
> resp->no_of_users = 0;
>
> if (!mpu_opps || !dsp_opps || !l3_opps)
> - return 0;
> + return;
>
> /* Initialize the current level of the OPP resource
> * to the opp set by u-boot.
> @@ -161,11 +161,12 @@ void init_opp(struct shared_resource *re
> return;
> }
>
> +static struct device vdd2_dev;
> +
> int set_opp(struct shared_resource *resp, u32 target_level)
> {
> - unsigned long mpu_freq, mpu_old_freq, l3_freq, tput, t_opp;
> + unsigned long mpu_freq, mpu_old_freq, l3_freq, req_l3_freq, tput, t_opp;
> int ind;
> - struct bus_throughput_db *tput_db;
> struct cpufreq_freqs freqs_notify;
>
> if (resp->curr_level == target_level)
> @@ -188,6 +189,14 @@ int set_opp(struct shared_resource *resp
> #endif
> t_opp = ID_VDD(PRCM_VDD1) |
> ID_OPP_NO(mpu_opps[target_level].opp_id);
> +
> + /* For VDD1 OPP3 and above, make sure the interconnect
> + * is at 100Mhz or above.
> + * throughput in KiB/s for 100 Mhz = 100 * 1000 * 4.
> + */
> + if (mpu_opps[target_level].opp_id >= 3)
> + resource_request("vdd2_opp", &vdd2_dev, 400000);
> +
> if (resp->curr_level > target_level) {
> /* Scale Frequency and then voltage */
> clk_set_rate(vdd1_clk, mpu_freq);
> @@ -203,22 +212,32 @@ int set_opp(struct shared_resource *resp
> #endif
> clk_set_rate(vdd1_clk, mpu_freq);
> }
> +
> + /* Release the VDD2/interconnect constraint */
> + if (mpu_opps[target_level].opp_id < 3)
> + resource_release("vdd2_opp", &vdd2_dev);
> +
> resp->curr_level = curr_vdd1_prcm_set->opp_id;
> #ifdef CONFIG_CPU_FREQ
> /* Send a post notification to CPUFreq */
> cpufreq_notify_transition(&freqs_notify, CPUFREQ_POSTCHANGE);
> #endif
> } else if (strcmp(resp->name, "vdd2_opp") == 0) {
> - tput_db = resp->resource_data;
> tput = target_level;
> - /* using the throughput db map to the appropriate L3 Freq */
> - for (ind = 1; ind < MAX_VDD2_OPP; ind++)
> - if (tput_db->throughput[ind] > tput)
> +
> + /* Convert the tput in KiB/s to Bus frequency in Mhz*/
> + req_l3_freq = (tput * 1000)/4;
> +
> + for (ind = 2; ind <= MAX_VDD2_OPP; ind++) {
> + if ((l3_opps + ind)->rate >= req_l3_freq) {
> target_level = ind;
> + break;
> + }
> + }
>
> /* Set the highest OPP possible */
> - if (ind == MAX_VDD2_OPP)
> - target_level = ind-1;
> + if (ind > MAX_VDD2_OPP)
> + target_level = MAX_VDD2_OPP;
>
> if (resp->curr_level == target_level)
> return 0;
> Index: linux-omap-2.6/arch/arm/mach-omap2/pm.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/pm.c 2008-12-16 10:35:55.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/pm.c 2008-12-16 16:01:48.580075608 +0530
> @@ -34,6 +34,7 @@
> #include <mach/powerdomain.h>
> #include <mach/omapdev.h>
> #include <mach/resource.h>
> +#include <mach/omap-pm.h>
>
> #include "prm-regbits-34xx.h"
> #include "pm.h"
> @@ -136,6 +137,7 @@ static ssize_t vdd_opp_store(struct kobj
> const char *buf, size_t n)
> {
> unsigned short value;
> + unsigned long bus_tput;
>
> if (sscanf(buf, "%hu", &value) != 1)
> return -EINVAL;
> @@ -151,7 +153,9 @@ static ssize_t vdd_opp_store(struct kobj
> printk(KERN_ERR "vdd_opp_store: Invalid value\n");
> return -EINVAL;
> }
> - resource_request("vdd2_opp", &dummy_sysfs_dev, value);
> + /* Convert OPP's requested to appr. bus throughtput in KiB/s */
> + bus_tput = ((l3_opps + value)->rate/1000) * 4;
> + resource_request("vdd2_opp", &dummy_sysfs_dev, bus_tput);
> } else {
> return -EINVAL;
> }
> Index: linux-omap-2.6/arch/arm/mach-omap2/resource34xx.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/resource34xx.h 2008-12-16 10:35:55.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/resource34xx.h 2008-12-16 15:28:22.341172791 +0530
> @@ -238,11 +238,6 @@ void init_freq(struct shared_resource *r
> int set_freq(struct shared_resource *resp, u32 target_level);
> int validate_freq(struct shared_resource *resp, u32 target_level);
>
> -struct bus_throughput_db {
> - /* Throughput for each OPP/Freq of the bus */
> - unsigned long throughput[3];
> -};
> -
> static struct shared_resource_ops opp_res_ops = {
> .init = init_opp,
> .change_level = set_opp,
> @@ -255,17 +250,9 @@ static struct shared_resource vdd1_opp =
> .ops = &opp_res_ops,
> };
>
> -/* Throughput in KiB/s */
> -static struct bus_throughput_db l3_throughput_db = {
> - .throughput[0] = 0,
> - .throughput[1] = 2656000,
> - .throughput[2] = 5312000,
> -};
> -
> static struct shared_resource vdd2_opp = {
> .name = "vdd2_opp",
> .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> - .resource_data = &l3_throughput_db,
> .ops = &opp_res_ops,
> };
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2008-12-16 19:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-16 13:00 [PATCH] OMAP3: PM: Scale VDD2 OPP for VDD1 OPP3 and higher Rajendra Nayak
2008-12-16 19:15 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y6yg53tg.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=rnayak@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.