From: Takashi Iwai <tiwai@suse.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Linux Sound Mailing List <linux-sound@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] sound fixes for 6.19-rc1
Date: Thu, 11 Dec 2025 18:07:00 +0100 [thread overview]
Message-ID: <87zf7p9ccr.wl-tiwai@suse.de> (raw)
Linus,
please pull sound fixes for v6.19-rc1 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git tags/sound-fix-6.19-rc1
The topmost commit is fd324768eb2c132bb111ba76675b4c72406251d9
----------------------------------------------------------------
sound fixes for 6.19-rc1
The rest for 6.19 merge window. The only slightly large change is
the enablement of CIX HD-audio controller, which took a bit time to
be cooked up, while most of other changes are device-specific small
trivial fixes.
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so
it can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks
----------------------------------------------------------------
Andres J Rosa (1):
ALSA: uapi: Fix typo in asound.h comment
Baojun Xu (1):
ALSA: hda/tas2781: Add new quirk for HP new project
David Heidelberg (1):
ALSA: Do not build obsolete API
Denis Arefev (1):
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
Eric Biggers (1):
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
Eric Naim (1):
ASoC: cs35l41: Always return 0 when a subsystem ID is found
Haotian Zhang (1):
ASoC: bcm: bcm63xx-pcm-whistler: Check return value of of_dma_configure()
HariKrishna Sagala (1):
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
Hemalatha Pinnamreddy (2):
ASoC: amd: acp: Audio is not resuming after s0ix
ASoC: amd: acp: update tdm channels for specific DAI
Joakim Zhang (3):
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: add CIX IPBLOQ HDA controller support
Johan Hovold (4):
ASoC: codecs: wcd937x: fix OF node leaks on probe failure
ASoC: codecs: wcd938x: fix OF node leaks on probe failure
ASoC: codecs: wcd939x: fix OF node leaks on probe failure
ASoc: qcom: q6afe: fix bad guard conversion
Junrui Luo (2):
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
Krzysztof Kozlowski (2):
ASoC: codecs: nau8325: Silence uninitialized variables warnings
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
Nathan Chancellor (1):
ALSA: hda: cix-ipbloq: Use modern PM ops
Richard Fitzgerald (2):
ASoC: cs-amp-lib: Revert use of __free(kfree) back to normal C cleanup
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
Shengjiu Wang (3):
ASoC: dt-bindings: cirrus,cs42xx8: Reference common DAI properties
ASoC: ak4458: Disable regulator when error happens
ASoC: ak5558: Disable regulator when error happens
Stefan Binding (2):
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: hda/realtek: Add support for ASUS UM3406GA
Takashi Iwai (1):
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
---
.../devicetree/bindings/sound/cirrus,cs42xx8.yaml | 5 +-
.../bindings/sound/cix,sky1-ipbloq-hda.yaml | 62 +++
arch/arm/configs/am200epdkit_defconfig | 1 -
arch/arm/configs/lpc32xx_defconfig | 1 -
arch/arm/configs/omap1_defconfig | 1 -
arch/arm/configs/tegra_defconfig | 1 -
arch/mips/configs/gcw0_defconfig | 1 -
arch/mips/configs/loongson1_defconfig | 1 -
arch/mips/configs/qi_lb60_defconfig | 1 -
arch/mips/configs/rbtx49xx_defconfig | 1 -
arch/mips/configs/rs90_defconfig | 1 -
arch/powerpc/configs/85xx-hw.config | 1 -
arch/powerpc/configs/86xx-hw.config | 1 -
arch/powerpc/configs/mpc5200_defconfig | 1 -
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/sh/configs/edosk7760_defconfig | 1 -
arch/sh/configs/se7724_defconfig | 1 -
arch/sh/configs/sh7785lcr_32bit_defconfig | 1 -
include/sound/hdaudio.h | 3 +
include/uapi/sound/asound.h | 2 +-
sound/core/Kconfig | 2 +-
sound/firewire/motu/motu-hwdep.c | 7 +-
sound/hda/codecs/realtek/alc269.c | 4 +
sound/hda/codecs/side-codecs/cs35l41_hda.c | 2 +
sound/hda/controllers/Kconfig | 14 +
sound/hda/controllers/Makefile | 2 +
sound/hda/controllers/cix-ipbloq.c | 436 +++++++++++++++++++++
sound/hda/core/bus.c | 1 +
sound/hda/core/controller.c | 12 +-
sound/hda/core/intel-dsp-config.c | 3 +-
sound/hda/core/stream.c | 10 +-
sound/soc/amd/acp/acp-i2s.c | 2 +
sound/soc/amd/acp/acp-legacy-common.c | 30 +-
sound/soc/bcm/bcm63xx-pcm-whistler.c | 4 +-
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/ak4458.c | 10 +-
sound/soc/codecs/ak5558.c | 10 +-
sound/soc/codecs/cs-amp-lib.c | 29 +-
sound/soc/codecs/cs35l41.c | 7 +-
sound/soc/codecs/nau8325.c | 4 +-
sound/soc/codecs/wcd937x.c | 4 +-
sound/soc/codecs/wcd938x.c | 3 +-
sound/soc/codecs/wcd939x.c | 3 +-
sound/soc/qcom/qdsp6/q6afe.c | 4 +-
sound/soc/rockchip/rockchip_pdm.c | 2 +-
sound/usb/mixer_quirks.c | 1 +
46 files changed, 626 insertions(+), 71 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/cix,sky1-ipbloq-hda.yaml
create mode 100644 sound/hda/controllers/cix-ipbloq.c
next reply other threads:[~2025-12-11 17:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-11 17:07 Takashi Iwai [this message]
2025-12-13 4:43 ` [GIT PULL] sound fixes for 6.19-rc1 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zf7p9ccr.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.