All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 7/8] drm/client: Move variables to tighter scope
Date: Wed, 12 Mar 2025 16:45:31 +0200	[thread overview]
Message-ID: <87zfhqe29g.fsf@intel.com> (raw)
In-Reply-To: <20250228211454.8138-8-ville.syrjala@linux.intel.com>

On Fri, 28 Feb 2025, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Bunch of variables are only needed inside loops and whatnot.
> Move them to a tighter scope to make the code less confusing.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> ---
>  drivers/gpu/drm/drm_client_modeset.c | 33 +++++++++++++++-------------
>  1 file changed, 18 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
> index a0caa2b229dd..54cbcaa476e2 100644
> --- a/drivers/gpu/drm/drm_client_modeset.c
> +++ b/drivers/gpu/drm/drm_client_modeset.c
> @@ -73,9 +73,10 @@ int drm_client_modeset_create(struct drm_client_dev *client)
>  static void drm_client_modeset_release(struct drm_client_dev *client)
>  {
>  	struct drm_mode_set *modeset;
> -	unsigned int i;
>  
>  	drm_client_for_each_modeset(modeset, client) {
> +		unsigned int i;
> +
>  		drm_mode_destroy(client->dev, modeset->mode);
>  		modeset->mode = NULL;
>  		modeset->fb = NULL;
> @@ -291,9 +292,8 @@ static bool drm_client_target_cloned(struct drm_device *dev,
>  				     struct drm_client_offset offsets[],
>  				     bool enabled[], int width, int height)
>  {
> -	int count, i, j;
> +	int count, i;
>  	bool can_clone = false;
> -	const struct drm_display_mode *mode;
>  	struct drm_display_mode *dmt_mode;
>  
>  	/* only contemplate cloning in the single crtc case */
> @@ -313,6 +313,8 @@ static bool drm_client_target_cloned(struct drm_device *dev,
>  	/* check the command line or if nothing common pick 1024x768 */
>  	can_clone = true;
>  	for (i = 0; i < connector_count; i++) {
> +		int j;
> +
>  		if (!enabled[i])
>  			continue;
>  
> @@ -347,6 +349,8 @@ static bool drm_client_target_cloned(struct drm_device *dev,
>  		goto fail;
>  
>  	for (i = 0; i < connector_count; i++) {
> +		const struct drm_display_mode *mode;
> +
>  		if (!enabled[i])
>  			continue;
>  
> @@ -380,12 +384,12 @@ static int drm_client_get_tile_offsets(struct drm_device *dev,
>  				       int idx,
>  				       int h_idx, int v_idx)
>  {
> -	struct drm_connector *connector;
>  	int i;
>  	int hoffset = 0, voffset = 0;
>  
>  	for (i = 0; i < connector_count; i++) {
> -		connector = connectors[i];
> +		struct drm_connector *connector = connectors[i];
> +
>  		if (!connector->has_tile)
>  			continue;
>  
> @@ -415,7 +419,6 @@ static bool drm_client_target_preferred(struct drm_device *dev,
>  					bool enabled[], int width, int height)
>  {
>  	const u64 mask = BIT_ULL(connector_count) - 1;
> -	struct drm_connector *connector;
>  	u64 conn_configured = 0;
>  	int tile_pass = 0;
>  	int num_tiled_conns = 0;
> @@ -429,9 +432,9 @@ static bool drm_client_target_preferred(struct drm_device *dev,
>  
>  retry:
>  	for (i = 0; i < connector_count; i++) {
> +		struct drm_connector *connector = connectors[i];
>  		const char *mode_type;
>  
> -		connector = connectors[i];
>  
>  		if (conn_configured & BIT_ULL(i))
>  			continue;
> @@ -546,9 +549,8 @@ static int drm_client_pick_crtcs(struct drm_client_dev *client,
>  	struct drm_device *dev = client->dev;
>  	struct drm_connector *connector;
>  	int my_score, best_score, score;
> -	struct drm_crtc **crtcs, *crtc;
> +	struct drm_crtc **crtcs;
>  	struct drm_mode_set *modeset;
> -	int o;
>  
>  	if (n == connector_count)
>  		return 0;
> @@ -578,7 +580,8 @@ static int drm_client_pick_crtcs(struct drm_client_dev *client,
>  	 * remaining connectors
>  	 */
>  	drm_client_for_each_modeset(modeset, client) {
> -		crtc = modeset->crtc;
> +		struct drm_crtc *crtc = modeset->crtc;
> +		int o;
>  
>  		if (!connector_has_possible_crtc(connector, crtc))
>  			continue;
> @@ -622,7 +625,7 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  	const int count = min_t(unsigned int, connector_count, BITS_PER_LONG);
>  	unsigned long conn_configured, conn_seq, mask;
>  	struct drm_device *dev = client->dev;
> -	int i, j;
> +	int i;
>  	bool *save_enabled;
>  	bool fallback = true, ret = true;
>  	int num_connectors_enabled = 0;
> @@ -656,12 +659,11 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
>  retry:
>  	conn_seq = conn_configured;
>  	for (i = 0; i < count; i++) {
> -		struct drm_connector *connector;
> +		struct drm_connector *connector = connectors[i];
>  		struct drm_encoder *encoder;
>  		struct drm_crtc *crtc;
>  		const char *mode_type;
> -
> -		connector = connectors[i];
> +		int j;
>  
>  		if (conn_configured & BIT(i))
>  			continue;
> @@ -1239,11 +1241,12 @@ static void drm_client_modeset_dpms_legacy(struct drm_client_dev *client, int dp
>  	struct drm_connector *connector;
>  	struct drm_mode_set *modeset;
>  	struct drm_modeset_acquire_ctx ctx;
> -	int j;
>  	int ret;
>  
>  	DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret);
>  	drm_client_for_each_modeset(modeset, client) {
> +		int j;
> +
>  		if (!modeset->crtc->enabled)
>  			continue;

-- 
Jani Nikula, Intel

  reply	other threads:[~2025-03-12 14:45 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-28 21:14 [PATCH v2 0/8] drm/client: Stop using legacy crtc->mode and a bunch of cleanups Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 1/8] drm/client: Constify modes Ville Syrjala
2025-03-01  3:28   ` kernel test robot
2025-03-01  4:41   ` kernel test robot
2025-03-03  9:38   ` [PATCH v3 " Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 2/8] drm/client: Use array notation for function arguments Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 3/8] drm/client: Streamline mode selection debugs Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 4/8] drm/client: Make copies of modes Ville Syrjala
2025-03-12 14:38   ` Jani Nikula
2025-02-28 21:14 ` [PATCH v2 5/8] drm/client: Stop using the legacy crtc->mode Ville Syrjala
2025-03-12 14:44   ` Jani Nikula
2025-02-28 21:14 ` [PATCH v2 6/8] drm/client: s/new_crtc/crtc/ Ville Syrjala
2025-03-12 14:45   ` Jani Nikula
2025-02-28 21:14 ` [PATCH v2 7/8] drm/client: Move variables to tighter scope Ville Syrjala
2025-03-12 14:45   ` Jani Nikula [this message]
2025-02-28 21:14 ` [PATCH v2 8/8] drm/client: s/unsigned int i/int i/ Ville Syrjala
2025-03-12 14:45   ` Jani Nikula
2025-02-28 21:35 ` ✗ Fi.CI.CHECKPATCH: warning for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev5) Patchwork
2025-02-28 21:56 ` ✓ i915.CI.BAT: success " Patchwork
2025-03-01 10:34 ` ✗ i915.CI.Full: failure " Patchwork
2025-03-03 10:27 ` ✗ Fi.CI.CHECKPATCH: warning for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev6) Patchwork
2025-03-03 10:45 ` ✗ i915.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87zfhqe29g.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.