From: Mikhail Rudenko <mike.rudenko@gmail.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings
Date: Fri, 15 Jul 2022 00:43:04 +0300 [thread overview]
Message-ID: <87zghb8j51.fsf@gmail.com> (raw)
In-Reply-To: <YtCGeBp5U18ljyuX@valkosipuli.retiisi.eu>
On 2022-07-15 at 00:11 +03, Sakari Ailus <sakari.ailus@iki.fi> wrote:
> Hi Mikhail,
>
> Thanks for the patch.
>
> On Tue, Jul 12, 2022 at 05:19:09PM +0300, Mikhail Rudenko wrote:
>> Add device-tree binding documentation for OV4689 image sensor driver,
>> and the relevant MAINTAINERS entries.
>>
>> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
>> ---
>> .../bindings/media/i2c/ovti,ov4689.yaml | 122 ++++++++++++++++++
>> MAINTAINERS | 7 +
>> 2 files changed, 129 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> new file mode 100644
>> index 000000000000..6bdebe5862b4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> @@ -0,0 +1,122 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Omnivision OV4689 CMOS Sensor Device Tree Bindings
>> +
>> +maintainers:
>> + - Mikhail Rudenko <mike.rudenko@gmail.com>
>> +
>> +description: |-
>> + The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
>> + image sensor. Ihis chip supports high frame rate speeds up to 90 fps
>> + at 2688x1520 resolution. It is programmable through an I2C
>> + interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
>> + connection.
>> +
>> +allOf:
>> + - $ref: /schemas/media/video-interface-devices.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: ovti,ov4689
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + clock-names:
>> + description:
>> + External clock for the sensor.
>> + items:
>> + - const: xclk
>> +
>> + dovdd-supply:
>> + description:
>> + Definition of the regulator used as Digital I/O voltage supply.
>> +
>> + avdd-supply:
>> + description:
>> + Definition of the regulator used as Analog voltage supply.
>> +
>> + dvdd-supply:
>> + description:
>> + Definition of the regulator used as Digital core voltage supply.
>> +
>> + powerdown-gpios:
>> + maxItems: 1
>> + description:
>> + Reference to the GPIO connected to the powerdown pin (active low).
>> +
>> + reset-gpios:
>> + maxItems: 1
>> + description:
>> + Reference to the GPIO connected to the reset pin (active low).
>> +
>> + orientation: true
>> +
>> + rotation: true
>> +
>> + port:
>> + $ref: /schemas/graph.yaml#/$defs/port-base
>> + additionalProperties: false
>> + description:
>> + Output port node, single endpoint describing the CSI-2 transmitter.
>> +
>> + properties:
>> + endpoint:
>> + $ref: /schemas/media/video-interfaces.yaml#
>> + unevaluatedProperties: false
>
> The number of lanes is needed, please require data-lanes property here (as
> well as add it to the example).
Thanks for review, will fix in v2
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - clock-names
>> + - dovdd-supply
>> + - avdd-supply
>> + - dvdd-supply
>> + - powerdown-gpios
>> + - reset-gpios
>> + - port
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> +
>> + i2c {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + ov4689: camera@36 {
>> + compatible = "ovti,ov4689";
>> + reg = <0x36>;
>> +
>> + clocks = <&ov4689_clk>;
>> + clock-names = "xclk";
>> +
>> + avdd-supply = <&ov4689_avdd>;
>> + dovdd-supply = <&ov4689_dovdd>;
>> + dvdd-supply = <&ov4689_dvdd>;
>> +
>> + powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
>> + reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
>> +
>> + orientation = <2>;
>> + rotation = <0>;
>> +
>> + port {
>> + wcam_out: endpoint {
>> + remote-endpoint = <&mipi_in_wcam>;
>> + };
>> + };
>> + };
>> + };
>> +
>> +...
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index f468864fd268..63c4844f26e6 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14523,6 +14523,13 @@ S: Maintained
>> T: git git://linuxtv.org/media_tree.git
>> F: drivers/media/i2c/ov2740.c
>>
>> +OMNIVISION OV4689 SENSOR DRIVER
>> +M: Mikhail Rudenko <mike.rudenko@gmail.com>
>> +L: linux-media@vger.kernel.org
>> +S: Maintained
>> +T: git git://linuxtv.org/media_tree.git
>> +F: Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> +
>> OMNIVISION OV5640 SENSOR DRIVER
>> M: Steve Longerbeam <slongerbeam@gmail.com>
>> L: linux-media@vger.kernel.org
--
Best regards,
Mikhail Rudenko
next prev parent reply other threads:[~2022-07-14 21:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 14:19 [PATCH 0/2] Add Omnivision OV4689 image sensor driver Mikhail Rudenko
2022-07-12 14:19 ` [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings Mikhail Rudenko
2022-07-12 15:12 ` Krzysztof Kozlowski
2022-07-12 16:40 ` Mikhail Rudenko
2022-07-14 21:11 ` Sakari Ailus
2022-07-14 21:43 ` Mikhail Rudenko [this message]
2022-07-12 14:19 ` [PATCH 2/2] media: i2c: add support for ov4689 Mikhail Rudenko
2022-08-15 16:59 ` [PATCH 0/2] Add Omnivision OV4689 image sensor driver Mikhail Rudenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zghb8j51.fsf@gmail.com \
--to=mike.rudenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.