Re: [Intel-gfx] [PATCH v4] drm/i915/dsi: add payload receiving code

[Jani Nikula <jani.nikula@linux.intel.com>]

On Mon, 20 Jun 2022, William Tseng <william.tseng@intel.com> wrote:
> To support Host to read data from Peripheral after
> a DCS read command is sent over DSI.

You keep resending this. Are you changing something? If yes, what?
Where's the changelog?

BR,
Jani.


>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
> Cc: Lee Shawn C <shawn.c.lee@intel.com>
> Signed-off-by: William Tseng <william.tseng@intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c      | 75 +++++++++++++++++++--
>  drivers/gpu/drm/i915/display/icl_dsi_regs.h | 13 ++++
>  2 files changed, 83 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 19bf717fd4cb..b2aa3c7902f3 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -201,6 +201,69 @@ static int dsi_send_pkt_hdr(struct intel_dsi_host *host,
>  	return 0;
>  }
>  
> +static int dsi_read_pkt_payld(struct intel_dsi_host *host,
> +			      u8 *rx_buf, size_t rx_len)
> +{
> +	struct intel_dsi *intel_dsi = host->intel_dsi;
> +	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
> +	enum transcoder dsi_trans = dsi_port_to_transcoder(host->port);
> +	u32 tmp, /*hdr_data, */payld_data;
> +	u32 payld_dw;
> +	size_t payld_read;
> +	u8 i;
> +
> +	/* step2: place a BTA reque */
> +	/* check if header credit available */
> +	if (!wait_for_header_credits(dev_priv, dsi_trans, 1)) {
> +		drm_err(&dev_priv->drm, "not ready to recive payload\n");
> +		return -EBUSY;
> +	}
> +
> +	/* place BTA request */
> +	tmp = intel_de_read(dev_priv, DSI_LP_MSG(dsi_trans));
> +	tmp |= LINK_BTA;
> +	intel_de_write(dev_priv, DSI_LP_MSG(dsi_trans), tmp);
> +
> +	tmp = intel_de_read(dev_priv, DSI_LP_MSG(dsi_trans));
> +
> +	/* step2a:  */
> +	/* step2ai: set Turn-Around Timeout */
> +	tmp = intel_de_read(dev_priv, DSI_TA_TO(dsi_trans));
> +	tmp &= ~TA_TIMEOUT_VALUE_MASK;
> +	tmp |= TA_TIMEOUT_VALUE(intel_dsi->turn_arnd_val);
> +	intel_de_write(dev_priv, DSI_TA_TO(dsi_trans), tmp);
> +
> +	tmp = intel_de_read(dev_priv, DSI_TA_TO(dsi_trans));
> +
> +	/* step2aii: set maximum allowed time */
> +	tmp = intel_de_read(dev_priv, DSI_LPRX_HOST_TO(dsi_trans));
> +	tmp &= ~LPRX_TIMEOUT_VALUE_MASK;
> +	tmp |= LPRX_TIMEOUT_VALUE(intel_dsi->lp_rx_timeout);
> +	intel_de_write(dev_priv, DSI_LPRX_HOST_TO(dsi_trans), tmp);
> +
> +	tmp = intel_de_read(dev_priv, DSI_LPRX_HOST_TO(dsi_trans));
> +
> +	/* step4a: wait and read payload */
> +	if (wait_for_us(((intel_de_read(dev_priv, DSI_CMD_RXCTL(dsi_trans)) &
> +		NUMBER_RX_PLOAD_DW_MASK) >> NUMBER_RX_PLOAD_DW_SHIFT) > 0, 100000)) {
> +		drm_err(&dev_priv->drm, "DSI fails to receive payload\n");
> +		return -EBUSY;
> +	}
> +
> +	tmp = intel_de_read(dev_priv, DSI_CMD_RXCTL(dsi_trans));
> +	payld_dw = (tmp & NUMBER_RX_PLOAD_DW_MASK) >> NUMBER_RX_PLOAD_DW_SHIFT;
> +	payld_read = min(rx_len, (size_t)(4 * payld_dw));
> +
> +	for (i = 0; i < payld_read; i++) {
> +		if ((i % 4) == 0)
> +			payld_data = intel_de_read(dev_priv, DSI_CMD_RXPYLD(dsi_trans));
> +
> +		*(rx_buf + i) = (payld_data >> (8 * (i % 4))) & 0xff;
> +	}
> +
> +	return (int)payld_read;
> +}
> +
>  void icl_dsi_frame_update(struct intel_crtc_state *crtc_state)
>  {
>  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> @@ -1078,8 +1141,8 @@ static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder,
>  	mul = 8 * 1000000;
>  	hs_tx_timeout = DIV_ROUND_UP(intel_dsi->hs_tx_timeout * mul,
>  				     divisor);
> -	lp_rx_timeout = DIV_ROUND_UP(intel_dsi->lp_rx_timeout * mul, divisor);
> -	ta_timeout = DIV_ROUND_UP(intel_dsi->turn_arnd_val * mul, divisor);
> +	lp_rx_timeout = intel_dsi->lp_rx_timeout;
> +	ta_timeout = intel_dsi->turn_arnd_val;
>  
>  	for_each_dsi_port(port, intel_dsi->ports) {
>  		dsi_trans = dsi_port_to_transcoder(port);
> @@ -1837,9 +1900,11 @@ static ssize_t gen11_dsi_host_transfer(struct mipi_dsi_host *host,
>  	if (ret < 0)
>  		return ret;
>  
> -	//TODO: add payload receive code if needed
> -
> -	ret = sizeof(dsi_pkt.header) + dsi_pkt.payload_length;
> +	/* add payload receive code if needed */
> +	if (msg->rx_buf && msg->rx_len > 0)
> +		ret = dsi_read_pkt_payld(intel_dsi_host, msg->rx_buf, msg->rx_len);
> +	else
> +		ret = sizeof(dsi_pkt.header) + dsi_pkt.payload_length;
>  
>  	return ret;
>  }
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi_regs.h b/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> index f78f28b8dd94..a77a49b42d60 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> +++ b/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> @@ -251,6 +251,18 @@
>  #define  NUMBER_RX_PLOAD_DW_MASK	(0xff << 0)
>  #define  NUMBER_RX_PLOAD_DW_SHIFT	0
>  
> +#define _DSI_CMD_RXHDR_0		0x6b0e0
> +#define _DSI_CMD_RXHDR_1		0x6b8e0
> +#define DSI_CMD_RXHDR(tc)		_MMIO_DSI(tc,	\
> +						  _DSI_CMD_RXHDR_0,\
> +						  _DSI_CMD_RXHDR_1)
> +
> +#define _DSI_CMD_RXPYLD_0		0x6b0e4
> +#define _DSI_CMD_RXPYLD_1		0x6b8e4
> +#define DSI_CMD_RXPYLD(tc)		_MMIO_DSI(tc,	\
> +						  _DSI_CMD_RXPYLD_0,\
> +						  _DSI_CMD_RXPYLD_1)
> +
>  #define _DSI_CMD_TXCTL_0		0x6b0d0
>  #define _DSI_CMD_TXCTL_1		0x6b8d0
>  #define DSI_CMD_TXCTL(tc)		_MMIO_DSI(tc,	\
> @@ -294,6 +306,7 @@
>  #define  LPTX_IN_PROGRESS		(1 << 17)
>  #define  LINK_IN_ULPS			(1 << 16)
>  #define  LINK_ULPS_TYPE_LP11		(1 << 8)
> +#define  LINK_BTA			(1 << 1)
>  #define  LINK_ENTER_ULPS		(1 << 0)
>  
>  /* DSI timeout registers */

-- 
Jani Nikula, Intel Open Source Graphics Center