All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Junaid Shahid <junaids@google.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 5/9] KVM: nSVM: introduce nested_svm_load_cr3()/nested_npt_enabled()
Date: Tue, 14 Jul 2020 13:26:24 +0200	[thread overview]
Message-ID: <87zh82s5gf.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20200713223814.GG29725@linux.intel.com>

Sean Christopherson <sean.j.christopherson@intel.com> writes:

> On Fri, Jul 10, 2020 at 04:11:53PM +0200, Vitaly Kuznetsov wrote:
>> As a preparatory change for implementing nested specifig PGD switch for
>
> s/specifig/specific
>
>> nSVM (following nVMX' nested_vmx_load_cr3()) instead of relying on
>
> nVMX's
>
>> kvm_set_cr3() introduce nested_svm_load_cr3().
>
> The changelog isn't all that helpful to understanding the actual change.
> All this is doing is wrapping kvm_set_cr3(), but that's not at all obvious
> from reading the above.
>
> E.g.
>
>   Add nested_svm_load_cr3() as a pass-through to kvm_set_cr3() as a
>   preparatory change for implementing nested specific PGD switch for nSVM,
>   (following nVMx's nested_vmx_load_cr3()).
>

Sounds better indeed, thanks!

>> No functional change intended.
>> 
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>>  arch/x86/kvm/svm/nested.c | 21 +++++++++++++++++++--
>>  1 file changed, 19 insertions(+), 2 deletions(-)
>> 
>> diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
>> index 5e6c988a4e6b..180929f3dbef 100644
>> --- a/arch/x86/kvm/svm/nested.c
>> +++ b/arch/x86/kvm/svm/nested.c
>> @@ -311,6 +311,21 @@ static void nested_vmcb_save_pending_event(struct vcpu_svm *svm,
>>  	nested_vmcb->control.exit_int_info = exit_int_info;
>>  }
>>  
>> +static inline bool nested_npt_enabled(struct vcpu_svm *svm)
>> +{
>> +	return svm->nested.ctl.nested_ctl & SVM_NESTED_CTL_NP_ENABLE;
>> +}
>> +
>> +/*
>> + * Load guest's cr3 at nested entry. @nested_npt is true if we are
>> + * emulating VM-Entry into a guest with NPT enabled.
>> + */
>> +static int nested_svm_load_cr3(struct kvm_vcpu *vcpu, unsigned long cr3,
>> +			       bool nested_npt)
>
> IMO the addition of nested_npt_enabled() should be a separate patch, and
> the additoin of @nested_npt should be in patch 7.
>
> Hypothetically speaking, if nested_npt_enabled() is inaccurate at the call
> site in nested_prepare_vmcb_save(), then this patch is technically wrong
> even though it doesn't introduce a bug.  Given that the call site of
> nested_svm_load_cr3() is moved in patch 7, I don't see any value in adding
> the placeholder parameter early.
>

I see and I mostly agree, I put it here to avoid the unneeded churn and
make it easier to review the whole thing: this patch is technically a
nop so it can be reviewed in "doesn't change anything" mode and patches
which actually change things are smaller.

Paolo already said 'queued' here and your comments can't be addressed in
a follow-up patch but I can certainly do v5 if needed.

Thanks for your review!

-- 
Vitaly


  reply	other threads:[~2020-07-14 11:26 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-10 14:11 [PATCH v4 0/9] KVM: nSVM: fixes for CR3/MMU switch upon nested guest entry/exit Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 1/9] KVM: nSVM: split kvm_init_shadow_npt_mmu() from kvm_init_shadow_mmu() Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 2/9] KVM: MMU: stop dereferencing vcpu->arch.mmu to get the context for MMU init Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 3/9] KVM: nSVM: reset nested_run_pending upon nested_svm_vmrun_msrpm() failure Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 4/9] KVM: nSVM: prepare to handle errors from enter_svm_guest_mode() Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 5/9] KVM: nSVM: introduce nested_svm_load_cr3()/nested_npt_enabled() Vitaly Kuznetsov
2020-07-13 22:38   ` Sean Christopherson
2020-07-14 11:26     ` Vitaly Kuznetsov [this message]
2020-07-15  4:36       ` Sean Christopherson
2020-07-10 14:11 ` [PATCH v4 6/9] KVM: nSVM: move kvm_set_cr3() after nested_svm_uninit_mmu_context() Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 7/9] KVM: nSVM: implement nested_svm_load_cr3() and use it for host->guest switch Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 8/9] KVM: nSVM: use nested_svm_load_cr3() on guest->host switch Vitaly Kuznetsov
2020-07-10 14:11 ` [PATCH v4 9/9] KVM: x86: drop superfluous mmu_check_root() from fast_pgd_switch() Vitaly Kuznetsov
2020-07-10 17:03 ` [PATCH v4 0/9] KVM: nSVM: fixes for CR3/MMU switch upon nested guest entry/exit Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87zh82s5gf.fsf@vitty.brq.redhat.com \
    --to=vkuznets@redhat.com \
    --cc=jmattson@google.com \
    --cc=junaids@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.