All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Reza Arbab <arbab@linux.vnet.ibm.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org,
	Balbir Singh <bsingharora@gmail.com>,
	Alistair Popple <apopple@au1.ibm.com>
Subject: Re: [PATCH v3 3/5] powerpc/mm: add radix__create_section_mapping()
Date: Mon, 19 Dec 2016 14:34:13 +0530	[thread overview]
Message-ID: <87zijsthma.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1481831443-22761-4-git-send-email-arbab@linux.vnet.ibm.com>

Reza Arbab <arbab@linux.vnet.ibm.com> writes:

> Add the linear page mapping function for radix, used by memory hotplug.
> This is similar to vmemmap_populate().
>

Ok with this patch your first patch becomes useful. Can you merge that
with this and rename mmu_linear_psize to mmu_hotplug_psize or even use
mmu_virtual_psize. The linear naming is confusing.


> Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
> ---
>  arch/powerpc/include/asm/book3s/64/radix.h |  4 ++++
>  arch/powerpc/mm/pgtable-book3s64.c         |  2 +-
>  arch/powerpc/mm/pgtable-radix.c            | 19 +++++++++++++++++++
>  3 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
> index b4d1302..43c2571 100644
> --- a/arch/powerpc/include/asm/book3s/64/radix.h
> +++ b/arch/powerpc/include/asm/book3s/64/radix.h
> @@ -291,5 +291,9 @@ static inline unsigned long radix__get_tree_size(void)
>  	}
>  	return rts_field;
>  }
> +
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +int radix__create_section_mapping(unsigned long start, unsigned long end);
> +#endif /* CONFIG_MEMORY_HOTPLUG */
>  #endif /* __ASSEMBLY__ */
>  #endif
> diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c
> index 653ff6c..2b13f6b 100644
> --- a/arch/powerpc/mm/pgtable-book3s64.c
> +++ b/arch/powerpc/mm/pgtable-book3s64.c
> @@ -131,7 +131,7 @@ void mmu_cleanup_all(void)
>  int create_section_mapping(unsigned long start, unsigned long end)
>  {
>  	if (radix_enabled())
> -		return -ENODEV;
> +		return radix__create_section_mapping(start, end);
>
>  	return hash__create_section_mapping(start, end);
>  }
> diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
> index 54bd70e..8201d1f 100644
> --- a/arch/powerpc/mm/pgtable-radix.c
> +++ b/arch/powerpc/mm/pgtable-radix.c
> @@ -465,6 +465,25 @@ void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
>  	memblock_set_current_limit(first_memblock_base + first_memblock_size);
>  }
>
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +int radix__create_section_mapping(unsigned long start, unsigned long end)
> +{
> +	unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
> +
> +	/* Align to the page size of the linear mapping. */
> +	start = _ALIGN_DOWN(start, page_size);
> +
> +	for (; start < end; start += page_size) {
> +		int rc = radix__map_kernel_page(start, __pa(start),
> +						PAGE_KERNEL, page_size);
> +		if (rc)
> +			return rc;
> +	}
> +
> +	return 0;
> +}
> +#endif /* CONFIG_MEMORY_HOTPLUG */
> +
>  #ifdef CONFIG_SPARSEMEM_VMEMMAP
>  int __meminit radix__vmemmap_create_mapping(unsigned long start,
>  				      unsigned long page_size,
> -- 
> 1.8.3.1

  reply	other threads:[~2016-12-19  9:04 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-15 19:50 [PATCH v3 0/5] powerpc/mm: enable memory hotplug on radix Reza Arbab
2016-12-15 19:50 ` [PATCH v3 1/5] powerpc/mm: set the radix linear page mapping size Reza Arbab
2016-12-19  8:58   ` Aneesh Kumar K.V
2016-12-19 20:53     ` Benjamin Herrenschmidt
2016-12-20  2:02       ` Aneesh Kumar K.V
2016-12-15 19:50 ` [PATCH v3 2/5] powerpc/mm: refactor {create, remove}_section_mapping() Reza Arbab
2016-12-19  9:00   ` Aneesh Kumar K.V
2016-12-19 18:00     ` [PATCH v3 2/5] powerpc/mm: refactor {create,remove}_section_mapping() Reza Arbab
2016-12-20  5:26   ` Balbir Singh
2016-12-15 19:50 ` [PATCH v3 3/5] powerpc/mm: add radix__create_section_mapping() Reza Arbab
2016-12-19  9:04   ` Aneesh Kumar K.V [this message]
2016-12-19 18:06     ` Reza Arbab
2016-12-21  7:03     ` Anshuman Khandual
2016-12-20  6:28   ` Balbir Singh
2016-12-20 15:32     ` Reza Arbab
2016-12-15 19:50 ` [PATCH v3 4/5] powerpc/mm: add radix__remove_section_mapping() Reza Arbab
2016-12-19  9:48   ` Aneesh Kumar K.V
2016-12-19 18:11     ` Reza Arbab
2016-12-19 20:59     ` Benjamin Herrenschmidt
2016-12-15 19:50 ` [PATCH v3 5/5] powerpc/mm: unstub radix__vmemmap_remove_mapping() Reza Arbab
2016-12-16 14:38 ` [PATCH v3 0/5] powerpc/mm: enable memory hotplug on radix Balbir Singh
2016-12-19 17:58   ` Reza Arbab
2016-12-21  6:54     ` Anshuman Khandual

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87zijsthma.fsf@linux.vnet.ibm.com \
    --to=aneesh.kumar@linux.vnet.ibm.com \
    --cc=apopple@au1.ibm.com \
    --cc=arbab@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.