From: Jani Nikula <jani.nikula@linux.intel.com>
To: Oliver Neukum <oneukum@suse.com>, intel-gfx@lists.freedesktop.org
Cc: eich@suse.com
Subject: Re: 4.3-rc5 triggering warning in i915 driver
Date: Tue, 13 Oct 2015 17:20:38 +0300 [thread overview]
Message-ID: <87zizm3l55.fsf@intel.com> (raw)
In-Reply-To: <1444726753.2508.4.camel@suse.com>
On Tue, 13 Oct 2015, Oliver Neukum <oneukum@suse.com> wrote:
> I got this warning, which 4.2 didn't show on boot:
Please try drm-intel-nightly branch from [1]. If that doesn't help,
please file a bug at [2].
Thanks,
Jani.
[1] http://cgit.freedesktop.org/drm-intel
[2] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
>
> [ 6.882835] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch
> in has_drrs (expected 1, found 0)
> [ 6.882836] ------------[ cut here ]------------
> [ 6.882854] WARNING: CPU: 0 PID: 6 at
> drivers/gpu/drm/i915/intel_display.c:12691 intel_modeset_check_state
> +0x4c7/0x8e0 [i915]()
> [ 6.882855] pipe state doesn't match!
> [ 6.882863] Modules linked in: crc32c_intel(E) ahci(E) libahci(E)
> libata(E) i915(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E)
> sysfillrect(E) ehci_pci(E) sysimgblt(E) fb_sys_fops(E) ehci_hcd(E)
> usbcore(E) drm(E) usb_common(E) wmi(E) video(E) button(E) sg(E)
> scsi_mod(E) autofs4(E)
> [ 6.882865] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G E
> 4.3.0-rc5-default+ #4
> [ 6.882865] Hardware name: Hewlett-Packard HP EliteBook 8780w/190A,
> BIOS L70 Ver. 93.01 05/17/2013
> [ 6.882870] Workqueue: events_unbound async_run_entry_fn
> [ 6.882872] ffffffffa02863f0 ffff880692cc3878 ffffffff812e3e26
> ffff880692cc38c0
> [ 6.882872] ffff880692cc38b0 ffffffff810647a6 ffff880691f37400
> ffff88068de86000
> [ 6.882873] ffff880692eeec00 0000000000000000 ffff88068e568a00
> ffff880692cc3910
> [ 6.882874] Call Trace:
> [ 6.882878] [<ffffffff812e3e26>] dump_stack+0x44/0x5e
> [ 6.882881] [<ffffffff810647a6>] warn_slowpath_common+0x86/0xc0
> [ 6.882882] [<ffffffff8106482c>] warn_slowpath_fmt+0x4c/0x50
> [ 6.882897] [<ffffffffa021be47>] intel_modeset_check_state
> +0x4c7/0x8e0 [i915]
> [ 6.882914] [<ffffffffa0227538>] intel_atomic_commit+0x598/0x5f0
> [i915]
> [ 6.882928] [<ffffffffa0098067>] drm_atomic_commit+0x37/0x60 [drm]
> [ 6.882933] [<ffffffffa018836e>] drm_atomic_helper_set_config
> +0x38e/0x400 [drm_kms_helper]
> [ 6.882941] [<ffffffffa0087cb4>] drm_mode_set_config_internal
> +0x64/0x100 [drm]
> [ 6.882945] [<ffffffffa018af3b>] restore_fbdev_mode+0xab/0x110
> [drm_kms_helper]
> [ 6.882949] [<ffffffffa018cce5>]
> drm_fb_helper_restore_fbdev_mode_unlocked+0x25/0x70 [drm_kms_helper]
> [ 6.882952] [<ffffffffa018cd5c>] drm_fb_helper_set_par+0x2c/0x50
> [drm_kms_helper]
> [ 6.882972] [<ffffffffa023b51a>] intel_fbdev_set_par+0x1a/0x60
> [i915]
> [ 6.882974] [<ffffffff8134f646>] fbcon_init+0x4c6/0x550
> [ 6.882976] [<ffffffff813cb7fa>] visual_init+0xca/0x130
> [ 6.882977] [<ffffffff813cddd6>] do_bind_con_driver+0x146/0x310
> [ 6.882979] [<ffffffff813ce2c1>] do_take_over_console+0x141/0x1b0
> [ 6.882980] [<ffffffff8134a847>] do_fbcon_takeover+0x57/0xb0
> [ 6.882981] [<ffffffff8135004b>] fbcon_event_notify+0x60b/0x750
> [ 6.882983] [<ffffffff81082db9>] notifier_call_chain+0x49/0x70
> [ 6.882984] [<ffffffff810830dd>] __blocking_notifier_call_chain
> +0x4d/0x70
> [ 6.882985] [<ffffffff81083116>] blocking_notifier_call_chain
> +0x16/0x20
> [ 6.882987] [<ffffffff8135579b>] fb_notifier_call_chain+0x1b/0x20
> [ 6.882988] [<ffffffff8135760e>] register_framebuffer+0x1de/0x300
> [ 6.882991] [<ffffffffa018cfd7>] drm_fb_helper_initial_config
> +0x257/0x3a0 [drm_kms_helper]
> [ 6.883008] [<ffffffffa023c5fb>] intel_fbdev_initial_config
> +0x1b/0x20 [i915]
> [ 6.883010] [<ffffffff810848c8>] async_run_entry_fn+0x48/0x150
> [ 6.883012] [<ffffffff8107c119>] process_one_work+0x149/0x3e0
> [ 6.883014] [<ffffffff8107c94a>] worker_thread+0x11a/0x460
> [ 6.883015] [<ffffffff8107c830>] ? max_active_store+0x60/0x60
> [ 6.883016] [<ffffffff81081d69>] kthread+0xc9/0xe0
> [ 6.883017] [<ffffffff81081ca0>] ? kthread_park+0x60/0x60
> [ 6.883019] [<ffffffff815a705f>] ret_from_fork+0x3f/0x70
> [ 6.883020] [<ffffffff81081ca0>] ? kthread_park+0x60/0x60
> [ 6.883021] ---[ end trace 2a13d8ac0ddd1cac ]---
> [ 6.886953] Console: switching to colour frame buffer device 200x56
> [ 6.889577] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>
>
> 00:02.0 0300: 8086:0416 (rev 06) (prog-if 00 [VGA controller])
> Subsystem: 103c:190a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at cc400000 (64-bit, non-prefetchable)
> [size=4M]
> Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at 6000 [size=64]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: fee00018 Data: 0000
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [a4] PCI Advanced Features
> AFCap: TP+ FLR+
> AFCtrl: FLR-
> AFStatus: TP-
> Kernel driver in use: i915
> Kernel modules: i915
>
> 01:00.0 0300: 10de:11b6 (rev a1) (prog-if 00 [VGA controller])
> Subsystem: 103c:190a
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at cb000000 (32-bit, non-prefetchable)
> [disabled] [size=16M]
> Region 1: Memory at 50000000 (64-bit, prefetchable) [disabled]
> [size=256M]
> Region 3: Memory at 60000000 (64-bit, prefetchable) [disabled]
> [size=32M]
> Region 5: I/O ports at 5000 [disabled] [size=128]
> Expansion ROM at cc080000 [disabled] [size=512K]
> Capabilities: [60] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 <64us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1,
> Exit Latency L0s <512ns, L1 <4us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 8GT/s, Width x16, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range AB, TimeoutDis+,
> LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-,
> LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance-
> SpeedDis-
> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete+, EqualizationPhase1+
> EqualizationPhase2+, EqualizationPhase3+,
> LinkEqualizationRequest+
> Capabilities: [b4] Vendor Specific Information: Len=14 <?>
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1
> RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Capabilities: [128 v1] Power Budgeting <?>
> Capabilities: [600 v1] Vendor Specific Information: ID=0001
> Rev=1 Len=024 <?>
> Capabilities: [900 v1] #19
> Kernel modules: nouveau
>
> The system has a dual GPU setup. X works despite the warning.
> I am using the internal display and a docking station but no external
> monitors.
>
> Regards
> Oliver
>
> [ 18.439]
> X.Org X Server 1.16.1
> Release Date: 2014-09-21
> [ 18.439] X Protocol Version 11, Revision 0
> [ 18.439] Build Operating System: openSUSE SUSE LINUX
> [ 18.439] Current Operating System: Linux linux-dtbq 4.3.0-rc5-default+ #4 SMP Tue Oct 13 10:21:02 CEST 2015 x86_64
> [ 18.439] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc5-default+ root=UUID=d1eec7b3-018d-44f9-93ca-63021a64a90c resume=/dev/disk/by-uuid/f063164f-9105-4ad0-9cc1-51a89657b5f2 splash=silent quiet showopts nouveau.debug=BARCTL=debug,DEVINIT=debug,PBUS=debug,PIBUS=debug
> [ 18.439] Build Date: 12 June 2015 07:55:09PM
> [ 18.439]
> [ 18.439] Current version of pixman: 0.32.6
> [ 18.439] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 18.439] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 18.440] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 13 10:44:52 2015
> [ 18.440] (==) Using config directory: "/etc/X11/xorg.conf.d"
> [ 18.440] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [ 18.440] (==) No Layout section. Using the first Screen section.
> [ 18.440] (==) No screen section available. Using defaults.
> [ 18.440] (**) |-->Screen "Default Screen Section" (0)
> [ 18.440] (**) | |-->Monitor "<default monitor>"
> [ 18.440] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 18.440] (==) Automatically adding devices
> [ 18.440] (==) Automatically enabling devices
> [ 18.440] (==) Automatically adding GPU devices
> [ 18.440] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
> [ 18.440] Entry deleted from font path.
> [ 18.440] (==) FontPath set to:
> /usr/share/fonts/misc:unscaled,
> /usr/share/fonts/Type1/,
> /usr/share/fonts/100dpi:unscaled,
> /usr/share/fonts/75dpi:unscaled,
> /usr/share/fonts/ghostscript/,
> /usr/share/fonts/cyrillic:unscaled,
> /usr/share/fonts/truetype/,
> built-ins
> [ 18.440] (==) ModulePath set to "/usr/lib64/xorg/modules"
> [ 18.440] (II) The server relies on udev to provide the list of input devices.
> If no devices become available, reconfigure udev or disable AutoAddDevices.
> [ 18.440] (II) Loader magic: 0x80ec80
> [ 18.440] (II) Module ABI versions:
> [ 18.440] X.Org ANSI C Emulation: 0.4
> [ 18.440] X.Org Video Driver: 18.0
> [ 18.440] X.Org XInput driver : 21.0
> [ 18.440] X.Org Server Extension : 8.0
> [ 18.440] (II) xfree86: Adding drm device (/dev/dri/card0)
> [ 18.441] (--) PCI:*(0:0:2:0) 8086:0416:103c:190a rev 6, Mem @ 0xcc400000/4194304, 0xa0000000/268435456, I/O @ 0x00006000/64
> [ 18.441] (--) PCI: (0:1:0:0) 10de:11b6:103c:190a rev 161, Mem @ 0xcb000000/16777216, 0x50000000/268435456, 0x60000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
> [ 18.441] (II) LoadModule: "glx"
> [ 18.442] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
> [ 18.443] (II) Module glx: vendor="X.Org Foundation"
> [ 18.443] compiled for 1.16.1, module version = 1.0.0
> [ 18.443] ABI class: X.Org Server Extension, version 8.0
> [ 18.443] (==) AIGLX enabled
> [ 18.443] (==) Matched intel as autoconfigured driver 0
> [ 18.443] (==) Matched intel as autoconfigured driver 1
> [ 18.443] (==) Matched modesetting as autoconfigured driver 2
> [ 18.443] (==) Matched fbdev as autoconfigured driver 3
> [ 18.443] (==) Matched vesa as autoconfigured driver 4
> [ 18.443] (==) Assigned the driver to the xf86ConfigLayout
> [ 18.443] (II) LoadModule: "intel"
> [ 18.443] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
> [ 18.443] (II) Module intel: vendor="X.Org Foundation"
> [ 18.443] compiled for 1.16.1, module version = 2.99.916
> [ 18.443] Module class: X.Org Video Driver
> [ 18.443] ABI class: X.Org Video Driver, version 18.0
> [ 18.443] (II) LoadModule: "modesetting"
> [ 18.443] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
> [ 18.443] (II) Module modesetting: vendor="X.Org Foundation"
> [ 18.443] compiled for 1.16.1, module version = 0.9.0
> [ 18.443] Module class: X.Org Video Driver
> [ 18.443] ABI class: X.Org Video Driver, version 18.0
> [ 18.443] (II) LoadModule: "fbdev"
> [ 18.443] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
> [ 18.443] (II) Module fbdev: vendor="X.Org Foundation"
> [ 18.443] compiled for 1.16.1, module version = 0.4.4
> [ 18.443] Module class: X.Org Video Driver
> [ 18.443] ABI class: X.Org Video Driver, version 18.0
> [ 18.443] (II) LoadModule: "vesa"
> [ 18.443] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
> [ 18.443] (II) Module vesa: vendor="X.Org Foundation"
> [ 18.443] compiled for 1.16.1, module version = 2.3.3
> [ 18.443] Module class: X.Org Video Driver
> [ 18.443] ABI class: X.Org Video Driver, version 18.0
> [ 18.443] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
> [ 18.443] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
> [ 18.443] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
> [ 18.443] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
> [ 18.443] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> [ 18.443] (II) FBDEV: driver for framebuffer: fbdev
> [ 18.443] (II) VESA: driver for VESA chipsets: vesa
> [ 18.443] (++) using VT number 7
>
> [ 18.443] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150731
> [ 18.444] (WW) Falling back to old probe method for modesetting
> [ 18.444] (WW) Falling back to old probe method for fbdev
> [ 18.444] (II) Loading sub module "fbdevhw"
> [ 18.444] (II) LoadModule: "fbdevhw"
> [ 18.444] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
> [ 18.444] (II) Module fbdevhw: vendor="X.Org Foundation"
> [ 18.444] compiled for 1.16.1, module version = 0.0.2
> [ 18.444] ABI class: X.Org Video Driver, version 18.0
> [ 18.444] (WW) Falling back to old probe method for vesa
> [ 18.444] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
> [ 18.444] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
> [ 18.444] (II) intel(0): Creating default Display subsection in Screen section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 18.444] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [ 18.444] (==) intel(0): RGB weight 888
> [ 18.444] (==) intel(0): Default visual is TrueColor
> [ 18.444] (II) intel(0): Output eDP1 has no monitor section
> [ 18.476] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
> [ 18.476] (II) intel(0): Enabled output eDP1
> [ 18.476] (II) intel(0): Output VGA1 has no monitor section
> [ 18.476] (II) intel(0): Enabled output VGA1
> [ 18.476] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
> [ 18.476] (II) intel(0): Output VIRTUAL1 has no monitor section
> [ 18.476] (II) intel(0): Enabled output VIRTUAL1
> [ 18.476] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
> [ 18.476] (==) intel(0): TearFree disabled
> [ 18.476] (==) intel(0): DPI set to (96, 96)
> [ 18.476] (II) Loading sub module "dri2"
> [ 18.476] (II) LoadModule: "dri2"
> [ 18.476] (II) Module "dri2" already built-in
> [ 18.476] (II) Loading sub module "present"
> [ 18.476] (II) LoadModule: "present"
> [ 18.476] (II) Module "present" already built-in
> [ 18.476] (II) UnloadModule: "modesetting"
> [ 18.476] (II) Unloading modesetting
> [ 18.476] (II) UnloadModule: "fbdev"
> [ 18.476] (II) Unloading fbdev
> [ 18.476] (II) UnloadSubModule: "fbdevhw"
> [ 18.476] (II) Unloading fbdevhw
> [ 18.476] (II) UnloadModule: "vesa"
> [ 18.476] (II) Unloading vesa
> [ 18.476] (==) Depth 24 pixmap format is 32 bpp
> [ 18.476] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
> [ 18.476] (==) intel(0): Backing store enabled
> [ 18.476] (==) intel(0): Silken mouse enabled
> [ 18.476] (II) intel(0): HW Cursor enabled
> [ 18.476] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> [ 18.476] (==) intel(0): DPMS enabled
> [ 18.476] (II) intel(0): [DRI2] Setup complete
> [ 18.476] (II) intel(0): [DRI2] DRI driver: i965
> [ 18.476] (II) intel(0): [DRI2] VDPAU driver: i965
> [ 18.476] (II) intel(0): direct rendering: DRI2 enabled
> [ 18.476] (II) intel(0): hardware support for Present enabled
> [ 18.476] (==) intel(0): display hotplug detection enabled
> [ 18.476] (--) RandR disabled
> [ 18.499] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [ 18.499] (II) AIGLX: enabled GLX_ARB_create_context
> [ 18.499] (II) AIGLX: enabled GLX_ARB_create_context_profile
> [ 18.499] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
> [ 18.499] (II) AIGLX: enabled GLX_INTEL_swap_event
> [ 18.499] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
> [ 18.499] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
> [ 18.499] (II) AIGLX: enabled GLX_ARB_fbconfig_float
> [ 18.499] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
> [ 18.499] (II) AIGLX: enabled GLX_ARB_create_context_robustness
> [ 18.499] (II) AIGLX: Loaded and initialized i965
> [ 18.499] (II) GLX: Initialized DRI2 GL provider for screen 0
> [ 18.501] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
> [ 18.518] (II) intel(0): Setting screen physical size to 423 x 238
> [ 18.544] (II) config/udev: Adding input device Power Button (/dev/input/event5)
> [ 18.545] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 18.545] (**) Power Button: Applying InputClass "system-keyboard"
> [ 18.545] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 18.545] (II) LoadModule: "evdev"
> [ 18.545] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 18.545] (II) Module evdev: vendor="X.Org Foundation"
> [ 18.545] compiled for 1.16.1, module version = 2.9.0
> [ 18.545] Module class: X.Org XInput Driver
> [ 18.545] ABI class: X.Org XInput driver, version 21.0
> [ 18.545] (II) Using input driver 'evdev' for 'Power Button'
> [ 18.545] (**) Power Button: always reports core events
> [ 18.545] (**) evdev: Power Button: Device: "/dev/input/event5"
> [ 18.545] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 18.545] (--) evdev: Power Button: Found keys
> [ 18.545] (II) evdev: Power Button: Configuring as keyboard
> [ 18.545] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event5"
> [ 18.545] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
> [ 18.545] (**) Option "xkb_rules" "evdev"
> [ 18.545] (**) Option "xkb_model" "pc104"
> [ 18.545] (**) Option "xkb_layout" "us"
> [ 18.558] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
> [ 18.558] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 18.558] (**) Video Bus: Applying InputClass "system-keyboard"
> [ 18.558] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 18.558] (II) Using input driver 'evdev' for 'Video Bus'
> [ 18.558] (**) Video Bus: always reports core events
> [ 18.558] (**) evdev: Video Bus: Device: "/dev/input/event7"
> [ 18.558] (--) evdev: Video Bus: Vendor 0 Product 0x6
> [ 18.558] (--) evdev: Video Bus: Found keys
> [ 18.558] (II) evdev: Video Bus: Configuring as keyboard
> [ 18.558] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event7"
> [ 18.558] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
> [ 18.558] (**) Option "xkb_rules" "evdev"
> [ 18.558] (**) Option "xkb_model" "pc104"
> [ 18.558] (**) Option "xkb_layout" "us"
> [ 18.558] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
> [ 18.558] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 18.558] (**) Video Bus: Applying InputClass "system-keyboard"
> [ 18.558] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 18.558] (II) Using input driver 'evdev' for 'Video Bus'
> [ 18.558] (**) Video Bus: always reports core events
> [ 18.558] (**) evdev: Video Bus: Device: "/dev/input/event6"
> [ 18.558] (--) evdev: Video Bus: Vendor 0 Product 0x6
> [ 18.558] (--) evdev: Video Bus: Found keys
> [ 18.558] (II) evdev: Video Bus: Configuring as keyboard
> [ 18.558] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12/event6"
> [ 18.558] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
> [ 18.558] (**) Option "xkb_rules" "evdev"
> [ 18.558] (**) Option "xkb_model" "pc104"
> [ 18.558] (**) Option "xkb_layout" "us"
> [ 18.559] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
> [ 18.559] (II) No input driver specified, ignoring this device.
> [ 18.559] (II) This device may have been added with another device file.
> [ 18.559] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
> [ 18.559] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
> [ 18.559] (**) Sleep Button: Applying InputClass "system-keyboard"
> [ 18.559] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
> [ 18.559] (II) Using input driver 'evdev' for 'Sleep Button'
> [ 18.559] (**) Sleep Button: always reports core events
> [ 18.559] (**) evdev: Sleep Button: Device: "/dev/input/event3"
> [ 18.559] (--) evdev: Sleep Button: Vendor 0 Product 0x3
> [ 18.559] (--) evdev: Sleep Button: Found keys
> [ 18.559] (II) evdev: Sleep Button: Configuring as keyboard
> [ 18.559] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9/event3"
> [ 18.559] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
> [ 18.559] (**) Option "xkb_rules" "evdev"
> [ 18.559] (**) Option "xkb_model" "pc104"
> [ 18.559] (**) Option "xkb_layout" "us"
> [ 18.559] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
> [ 18.559] (II) No input driver specified, ignoring this device.
> [ 18.559] (II) This device may have been added with another device file.
> [ 18.559] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
> [ 18.559] (II) No input driver specified, ignoring this device.
> [ 18.559] (II) This device may have been added with another device file.
> [ 18.559] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
> [ 18.559] (II) No input driver specified, ignoring this device.
> [ 18.559] (II) This device may have been added with another device file.
> [ 18.560] (II) config/udev: Adding input device Cherry USB-Keyboard (/dev/input/event21)
> [ 18.560] (**) Cherry USB-Keyboard: Applying InputClass "evdev keyboard catchall"
> [ 18.560] (**) Cherry USB-Keyboard: Applying InputClass "system-keyboard"
> [ 18.560] (**) Cherry USB-Keyboard: Applying InputClass "evdev keyboard catchall"
> [ 18.560] (II) Using input driver 'evdev' for 'Cherry USB-Keyboard'
> [ 18.560] (**) Cherry USB-Keyboard: always reports core events
> [ 18.560] (**) evdev: Cherry USB-Keyboard: Device: "/dev/input/event21"
> [ 18.560] (--) evdev: Cherry USB-Keyboard: Vendor 0x46a Product 0x1
> [ 18.560] (--) evdev: Cherry USB-Keyboard: Found keys
> [ 18.560] (II) evdev: Cherry USB-Keyboard: Configuring as keyboard
> [ 18.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.4/3-1.1.4:1.0/0003:046A:0001.0002/input/input27/event21"
> [ 18.560] (II) XINPUT: Adding extended input device "Cherry USB-Keyboard" (type: KEYBOARD, id 10)
> [ 18.560] (**) Option "xkb_rules" "evdev"
> [ 18.560] (**) Option "xkb_model" "pc104"
> [ 18.560] (**) Option "xkb_layout" "us"
> [ 18.560] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event19)
> [ 18.560] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
> [ 18.560] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
> [ 18.560] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
> [ 18.560] (**) Logitech Optical USB Mouse: always reports core events
> [ 18.560] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event19"
> [ 18.616] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
> [ 18.616] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
> [ 18.616] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
> [ 18.616] (--) evdev: Logitech Optical USB Mouse: Found relative axes
> [ 18.616] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
> [ 18.616] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
> [ 18.616] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
> [ 18.616] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
> [ 18.616] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 18.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C016.0001/input/input25/event19"
> [ 18.616] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 11)
> [ 18.616] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
> [ 18.616] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
> [ 18.616] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
> [ 18.616] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
> [ 18.616] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
> [ 18.616] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse2)
> [ 18.616] (II) No input driver specified, ignoring this device.
> [ 18.616] (II) This device may have been added with another device file.
> [ 18.616] (II) config/udev: Adding input device HP HD Webcam (/dev/input/event20)
> [ 18.616] (**) HP HD Webcam: Applying InputClass "evdev keyboard catchall"
> [ 18.616] (**) HP HD Webcam: Applying InputClass "system-keyboard"
> [ 18.616] (**) HP HD Webcam: Applying InputClass "evdev keyboard catchall"
> [ 18.616] (II) Using input driver 'evdev' for 'HP HD Webcam'
> [ 18.616] (**) HP HD Webcam: always reports core events
> [ 18.616] (**) evdev: HP HD Webcam: Device: "/dev/input/event20"
> [ 18.616] (--) evdev: HP HD Webcam: Vendor 0x4f2 Product 0xb3ed
> [ 18.616] (--) evdev: HP HD Webcam: Found keys
> [ 18.616] (II) evdev: HP HD Webcam: Configuring as keyboard
> [ 18.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input26/event20"
> [ 18.616] (II) XINPUT: Adding extended input device "HP HD Webcam" (type: KEYBOARD, id 12)
> [ 18.616] (**) Option "xkb_rules" "evdev"
> [ 18.616] (**) Option "xkb_model" "pc104"
> [ 18.616] (**) Option "xkb_layout" "us"
> [ 18.616] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
> [ 18.616] (II) No input driver specified, ignoring this device.
> [ 18.616] (II) This device may have been added with another device file.
> [ 18.617] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
> [ 18.617] (II) No input driver specified, ignoring this device.
> [ 18.617] (II) This device may have been added with another device file.
> [ 18.617] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
> [ 18.617] (II) No input driver specified, ignoring this device.
> [ 18.617] (II) This device may have been added with another device file.
> [ 18.617] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event13)
> [ 18.617] (II) No input driver specified, ignoring this device.
> [ 18.617] (II) This device may have been added with another device file.
> [ 18.617] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
> [ 18.617] (II) No input driver specified, ignoring this device.
> [ 18.617] (II) This device may have been added with another device file.
> [ 18.617] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
> [ 18.617] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
> [ 18.617] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
> [ 18.617] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
> [ 18.617] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
> [ 18.617] (**) AT Translated Set 2 keyboard: always reports core events
> [ 18.617] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
> [ 18.617] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
> [ 18.617] (--) evdev: AT Translated Set 2 keyboard: Found keys
> [ 18.617] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
> [ 18.617] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
> [ 18.617] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
> [ 18.617] (**) Option "xkb_rules" "evdev"
> [ 18.617] (**) Option "xkb_model" "pc104"
> [ 18.617] (**) Option "xkb_layout" "us"
> [ 18.617] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event1)
> [ 18.617] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
> [ 18.617] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
> [ 18.617] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
> [ 18.617] (**) PS/2 Generic Mouse: always reports core events
> [ 18.617] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event1"
> [ 18.617] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
> [ 18.617] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
> [ 18.617] (--) evdev: PS/2 Generic Mouse: Found relative axes
> [ 18.617] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
> [ 18.617] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
> [ 18.617] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
> [ 18.617] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 18.617] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event1"
> [ 18.617] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 14)
> [ 18.617] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
> [ 18.617] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
> [ 18.617] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
> [ 18.617] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
> [ 18.617] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
> [ 18.618] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
> [ 18.618] (II) No input driver specified, ignoring this device.
> [ 18.618] (II) This device may have been added with another device file.
> [ 18.618] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
> [ 18.618] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
> [ 18.618] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
> [ 18.618] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
> [ 18.618] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
> [ 18.618] (II) LoadModule: "synaptics"
> [ 18.618] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
> [ 18.618] (II) Module synaptics: vendor="X.Org Foundation"
> [ 18.618] compiled for 1.16.1, module version = 1.8.1
> [ 18.618] Module class: X.Org XInput Driver
> [ 18.618] ABI class: X.Org XInput driver, version 21.0
> [ 18.618] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
> [ 18.618] (**) SynPS/2 Synaptics TouchPad: always reports core events
> [ 18.618] (**) Option "Device" "/dev/input/event2"
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1324 - 5660 (res 42)
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1248 - 4730 (res 63)
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
> [ 18.688] (**) Option "HorizEdgeScroll" "off"
> [ 18.688] (**) Option "TapButton1" "1"
> [ 18.688] (**) Option "TapButton2" "3"
> [ 18.688] (**) Option "TapButton3" "2"
> [ 18.688] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
> [ 18.688] (**) SynPS/2 Synaptics TouchPad: always reports core events
> [ 18.720] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input7/event2"
> [ 18.720] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
> [ 18.720] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
> [ 18.720] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
> [ 18.720] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
> [ 18.720] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
> [ 18.720] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
> [ 18.720] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
> [ 18.720] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
> [ 18.720] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
> [ 18.720] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
> [ 18.720] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
> [ 18.720] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event18)
> [ 18.720] (II) No input driver specified, ignoring this device.
> [ 18.720] (II) This device may have been added with another device file.
> [ 18.720] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
> [ 18.720] (II) No input driver specified, ignoring this device.
> [ 18.720] (II) This device may have been added with another device file.
> [ 18.720] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
> [ 18.720] (II) No input driver specified, ignoring this device.
> [ 18.720] (II) This device may have been added with another device file.
> [ 18.721] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
> [ 18.721] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
> [ 18.721] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
> [ 18.721] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
> [ 18.721] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
> [ 18.721] (**) HP WMI hotkeys: always reports core events
> [ 18.721] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
> [ 18.721] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
> [ 18.721] (--) evdev: HP WMI hotkeys: Found keys
> [ 18.721] (II) evdev: HP WMI hotkeys: Configuring as keyboard
> [ 18.721] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event9"
> [ 18.721] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 16)
> [ 18.721] (**) Option "xkb_rules" "evdev"
> [ 18.721] (**) Option "xkb_model" "pc104"
> [ 18.721] (**) Option "xkb_layout" "us"
> [ 24.485] (II) intel(0): EDID vendor "CMN", prod id 5937
> [ 24.485] (II) intel(0): Printing DDC gathered Modelines:
> [ 24.485] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (55.6 kHz eP)
> [ 24.485] (II) intel(0): Modeline "1600x900"x0.0 71.86 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (37.0 kHz e)
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-10-13 14:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-13 8:59 4.3-rc5 triggering warning in i915 driver Oliver Neukum
2015-10-13 14:20 ` Jani Nikula [this message]
2015-10-13 14:32 ` Daniel Vetter
2015-10-13 14:39 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zizm3l55.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=eich@suse.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=oneukum@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.