From: Julien Cubizolles <j.cubizolles@free.fr>
To: Amitkumar Karwar <akarwar@marvell.com>
Cc: "linux-wireless\@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: firmware in a bad state (module mwifiex)
Date: Wed, 05 Aug 2015 08:30:54 +0200 [thread overview]
Message-ID: <87zj26z1pd.fsf_-_@free.fr> (raw)
In-Reply-To: <0e2dc4e2bd9f4486979cedb4c47e60f2@SC-EXCH04.marvell.com> (Amitkumar Karwar's message of "Mon, 27 Jul 2015 07:13:00 +0000")
[-- Attachment #1: Type: text/plain, Size: 647 bytes --]
I'm running kernel 4.2.0-rc3 with the following patches to the mwifiex
driver, thanks to your advice.
> Do you have following USB chipset specific fixes included?
> http://www.spinics.net/lists/linux-wireless/msg129129.html
> http://www.spinics.net/lists/netdev/msg334367.html
I've recently noticed that the connection is lost (and the driver too
only rebooting makes the card usable again) when I connect to certain
websites (github for instance)
I've set debugging up with the following command, and attached the output
from dmesg.
> "echo 0xffffffff > /sys/kernel/debug/mwifiex/mlan0/debug_mask"
Thanks for your help.
Regards,
Julien.
[-- Attachment #2: output from dmesg --]
[-- Type: text/plain, Size: 84121 bytes --]
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<6>[ 0.000000] Initializing cgroup subsys cpuacct
<5>[ 0.000000] Linux version 4.2.0-rc3 (root@touco) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #3 SMP Mon Jul 27 15:27:49 CEST 2015
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-rc3 root=UUID=919f00b8-5010-46e1-b2f9-c129e17d5312 ro quiet splash vt.handoff=7
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
<6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
<6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
<6>[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
<6>[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
<6>[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
<6>[ 0.000000] e820: BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9202fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000d9203000-0x00000000d9671fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000d9672000-0x00000000d9681fff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x00000000d9682000-0x00000000da24ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x00000000da250000-0x00000000da66cfff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000da66d000-0x00000000da6fefff] type 20
<6>[ 0.000000] BIOS-e820: [mem 0x00000000da6ff000-0x00000000da6fffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000da700000-0x00000000da742fff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x00000000da743000-0x00000000dad54fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000dad55000-0x00000000daff1fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] efi: EFI v2.31 by American Megatrends
<6>[ 0.000000] efi: ESRT=0xda5f1618 ACPI=0xd9677000 ACPI 2.0=0xd9677000 SMBIOS=0xda66b198
<6>[ 0.000000] esrt: Reserving ESRT space from 0x00000000da5f1618 to 0x00000000da5f16c8.
<6>[ 0.000000] SMBIOS 2.7 present.
<7>[ 0.000000] DMI: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.00.0250 01/08/2013
<7>[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-FFFFF uncachable
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 000000000 mask F00000000 write-back
<7>[ 0.000000] 1 base 100000000 mask FE0000000 write-back
<7>[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
<7>[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
<7>[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
<7>[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
<7>[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
<7>[ 0.000000] 7 disabled
<7>[ 0.000000] 8 disabled
<7>[ 0.000000] 9 disabled
<6>[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
<7>[ 0.000000] original variable MTRRs
<7>[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
<7>[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
<7>[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
<7>[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
<7>[ 0.000000] reg 4, base: 3512MB, range: 8MB, type UC
<7>[ 0.000000] reg 5, base: 4600MB, range: 8MB, type UC
<7>[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
<6>[ 0.000000] total RAM covered: 4014M
<6>[ 0.000000] Found optimal setting for mtrr clean up
<6>[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
<7>[ 0.000000] New variable MTRRs
<7>[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
<7>[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
<7>[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
<7>[ 0.000000] reg 3, base: 3512MB, range: 8MB, type UC
<7>[ 0.000000] reg 4, base: 3520MB, range: 64MB, type UC
<7>[ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
<7>[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
<7>[ 0.000000] reg 7, base: 4600MB, range: 8MB, type UC
<7>[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
<6>[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
<6>[ 0.000000] Scanning 1 areas for low memory corruption
<7>[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
<6>[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
<7>[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
<7>[ 0.000000] BRK [0x02002000, 0x02002fff] PGTABLE
<7>[ 0.000000] BRK [0x02003000, 0x02003fff] PGTABLE
<7>[ 0.000000] BRK [0x02004000, 0x02004fff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
<7>[ 0.000000] [mem 0x11f400000-0x11f5fffff] page 2M
<7>[ 0.000000] BRK [0x02005000, 0x02005fff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11f3fffff]
<7>[ 0.000000] [mem 0x100000000-0x11f3fffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xd9202fff]
<7>[ 0.000000] [mem 0xc0000000-0xd91fffff] page 2M
<7>[ 0.000000] [mem 0xd9200000-0xd9202fff] page 4k
<7>[ 0.000000] BRK [0x02006000, 0x02006fff] PGTABLE
<7>[ 0.000000] BRK [0x02007000, 0x02007fff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0xda6ff000-0xda6fffff]
<7>[ 0.000000] [mem 0xda6ff000-0xda6fffff] page 4k
<6>[ 0.000000] init_memory_mapping: [mem 0xda743000-0xdad54fff]
<7>[ 0.000000] [mem 0xda743000-0xda7fffff] page 4k
<7>[ 0.000000] [mem 0xda800000-0xdabfffff] page 2M
<7>[ 0.000000] [mem 0xdac00000-0xdad54fff] page 4k
<6>[ 0.000000] init_memory_mapping: [mem 0xdaff2000-0xdaffffff]
<7>[ 0.000000] [mem 0xdaff2000-0xdaffffff] page 4k
<6>[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
<7>[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
<7>[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
<7>[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
<7>[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
<6>[ 0.000000] init_memory_mapping: [mem 0x40005000-0xbfffffff]
<7>[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
<7>[ 0.000000] [mem 0x40200000-0xbfffffff] page 2M
<6>[ 0.000000] RAMDISK: [mem 0x35946000-0x36c9afff]
<6>[ 0.000000] ACPI: Early table checksum verification disabled
<4>[ 0.000000] ACPI: RSDP 0x00000000D9677000 000024 (v02 OEMR )
<4>[ 0.000000] ACPI: XSDT 0x00000000D9677080 00007C (v01 OEMR O E M R 00000000 OEMR 00010013)
<4>[ 0.000000] ACPI: FACP 0x00000000D967FD58 00010C (v05 OEMR O E M R 00000000 OEMR 00010013)
<4>[ 0.000000] ACPI: DSDT 0x00000000D9677188 008BCC (v02 OEMR O E M R 00000250 INTL 20051117)
<4>[ 0.000000] ACPI: FACS 0x00000000DA24E080 000040
<4>[ 0.000000] ACPI: APIC 0x00000000D967FE68 000072 (v03 OEMR O E M R 00000000 OEMR 00010013)
<4>[ 0.000000] ACPI: FPDT 0x00000000D967FEE0 000044 (v01 OEMR O E M R 00000000 OEMR 00010013)
<4>[ 0.000000] ACPI: MCFG 0x00000000D967FF28 00003C (v01 OEMR O E M R 00000000 MSFT 00000097)
<4>[ 0.000000] ACPI: MSDM 0x00000000D967FF68 000055 (v03 OEMR O E M R 00000000 OEMR 00010013)
<4>[ 0.000000] ACPI: HPET 0x00000000D967FFC0 000038 (v01 OEMR O E M R 00000000 AMI. 00000005)
<4>[ 0.000000] ACPI: SSDT 0x00000000D967FFF8 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
<4>[ 0.000000] ACPI: SSDT 0x00000000D9680310 0008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
<4>[ 0.000000] ACPI: SSDT 0x00000000D9680BB8 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
<4>[ 0.000000] ACPI: DMAR 0x00000000D96816E0 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
<4>[ 0.000000] ACPI: BGRT 0x00000000D9681798 000038 (v00 OEMR O E M R 00000000 OEMR 00010013)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] No NUMA configuration found
<6>[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
<6>[ 0.000000] NODE_DATA(0) allocated [mem 0x11f5f5000-0x11f5f9fff]
<7>[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011ebfffff] on node 0
<6>[ 0.000000] Zone ranges:
<6>[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.000000] Normal [mem 0x0000000100000000-0x000000011f5fffff]
<6>[ 0.000000] Movable zone start for each node
<6>[ 0.000000] Early memory node ranges
<6>[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
<6>[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
<6>[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
<6>[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d9202fff]
<6>[ 0.000000] node 0: [mem 0x00000000da6ff000-0x00000000da6fffff]
<6>[ 0.000000] node 0: [mem 0x00000000da743000-0x00000000dad54fff]
<6>[ 0.000000] node 0: [mem 0x00000000daff2000-0x00000000daffffff]
<6>[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011f5fffff]
<6>[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
<7>[ 0.000000] On node 0 totalpages: 1018816
<7>[ 0.000000] DMA zone: 64 pages used for memmap
<7>[ 0.000000] DMA zone: 23 pages reserved
<7>[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
<7>[ 0.000000] DMA32 zone: 13849 pages used for memmap
<7>[ 0.000000] DMA32 zone: 886307 pages, LIFO batch:31
<7>[ 0.000000] Normal zone: 2008 pages used for memmap
<7>[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
<6>[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
<6>[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<6>[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
<6>[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xd9203000-0xd9671fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xd9672000-0xd9681fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xd9682000-0xda24ffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xda250000-0xda66cfff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xda66d000-0xda6fefff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xda700000-0xda742fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xdad55000-0xdaff1fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
<6>[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
<6>[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
<6>[ 0.000000] Booting paravirtualized kernel on bare hardware
<6>[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
<6>[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
<6>[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011f200000 s97432 r8192 d29544 u524288
<7>[ 0.000000] pcpu-alloc: s97432 r8192 d29544 u524288 alloc=1*2097152
<7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3
<6>[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002872
<6>[ 0.000000] Policy zone: Normal
<5>[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-rc3 root=UUID=919f00b8-5010-46e1-b2f9-c129e17d5312 ro quiet splash vt.handoff=7
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<7>[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
<7>[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>[ 0.000000] Memory: 3880484K/4075264K available (7779K kernel code, 1309K rwdata, 3800K rodata, 1452K init, 1300K bss, 194780K reserved, 0K cma-reserved)
<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] Build-time adjustment of leaf fanout to 64.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
<6>[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
<6>[ 0.000000] Offload RCU callbacks from all CPUs
<6>[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] console [tty0] enabled
<6>[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
<7>[ 0.000000] hpet clockevent registered
<4>[ 0.000000] tsc: Unable to calibrate against PIT
<6>[ 0.000000] tsc: using HPET reference calibration
<6>[ 0.000000] tsc: Detected 1695.972 MHz processor
<6>[ 0.000050] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.94 BogoMIPS (lpj=6783888)
<6>[ 0.000054] pid_max: default: 32768 minimum: 301
<6>[ 0.000062] ACPI: Core revision 20150619
<4>[ 0.009825] ACPI: All ACPI Tables successfully acquired
<6>[ 0.010869] Security Framework initialized
<6>[ 0.010876] AppArmor: AppArmor initialized
<6>[ 0.010878] Yama: becoming mindful.
<6>[ 0.011273] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[ 0.012806] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[ 0.013514] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.013522] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.013784] Initializing cgroup subsys blkio
<6>[ 0.013788] Initializing cgroup subsys memory
<6>[ 0.013798] Initializing cgroup subsys devices
<6>[ 0.013801] Initializing cgroup subsys freezer
<6>[ 0.013804] Initializing cgroup subsys net_cls
<6>[ 0.013807] Initializing cgroup subsys perf_event
<6>[ 0.013810] Initializing cgroup subsys net_prio
<6>[ 0.013812] Initializing cgroup subsys hugetlb
<6>[ 0.013842] CPU: Physical Processor ID: 0
<6>[ 0.013843] CPU: Processor Core ID: 0
<4>[ 0.013849] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<4>[ 0.013851] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
<6>[ 0.014405] mce: CPU supports 7 MCE banks
<6>[ 0.014420] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.014427] process: using mwait in idle threads
<6>[ 0.014432] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
<6>[ 0.014433] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
<6>[ 0.014608] Freeing SMP alternatives memory: 28K (ffffffff81eb4000 - ffffffff81ebb000)
<6>[ 0.018817] ftrace: allocating 30368 entries in 119 pages
<6>[ 0.039107] DMAR: Host address width 36
<6>[ 0.039112] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
<6>[ 0.039125] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
<6>[ 0.039126] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
<6>[ 0.039132] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
<6>[ 0.039133] DMAR: RMRR base: 0x000000d9609000 end: 0x000000d9615fff
<6>[ 0.039135] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
<6>[ 0.039139] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
<6>[ 0.039140] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
<6>[ 0.039142] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.039545] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.039548] x2apic enabled
<6>[ 0.039558] Switched APIC routing to cluster x2apic.
<6>[ 0.040050] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<7>[ 0.079791] TSC deadline timer enabled
<6>[ 0.079796] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
<6>[ 0.079830] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
<6>[ 0.079858] ... version: 3
<6>[ 0.079860] ... bit width: 48
<6>[ 0.079861] ... generic registers: 4
<6>[ 0.079862] ... value mask: 0000ffffffffffff
<6>[ 0.079863] ... max period: 0000ffffffffffff
<6>[ 0.079865] ... fixed-purpose events: 3
<6>[ 0.079866] ... event mask: 000000070000000f
<6>[ 0.080885] x86: Booting SMP configuration:
<6>[ 0.080888] .... node #0, CPUs: #1
<6>[ 0.084872] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
<4>[ 0.084994] #2 #3
<6>[ 0.092787] x86: Booted up 1 node, 4 CPUs
<6>[ 0.092791] smpboot: Total of 4 processors activated (13567.77 BogoMIPS)
<6>[ 0.097599] devtmpfs: initialized
<6>[ 0.101118] evm: security.selinux
<6>[ 0.101120] evm: security.SMACK64
<6>[ 0.101121] evm: security.SMACK64EXEC
<6>[ 0.101122] evm: security.SMACK64TRANSMUTE
<6>[ 0.101123] evm: security.SMACK64MMAP
<6>[ 0.101124] evm: security.ima
<6>[ 0.101126] evm: security.capability
<6>[ 0.101213] PM: Registering ACPI NVS region [mem 0xd9682000-0xda24ffff] (12378112 bytes)
<6>[ 0.101418] PM: Registering ACPI NVS region [mem 0xda700000-0xda742fff] (274432 bytes)
<6>[ 0.101529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>[ 0.101636] pinctrl core: initialized pinctrl subsystem
<6>[ 0.101779] RTC time: 6:14:19, date: 08/05/15
<6>[ 0.101926] NET: Registered protocol family 16
<6>[ 0.105396] cpuidle: using governor ladder
<6>[ 0.109402] cpuidle: using governor menu
<6>[ 0.109513] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[ 0.109516] ACPI: bus type PCI registered
<6>[ 0.109518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.109612] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
<6>[ 0.109615] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
<6>[ 0.109627] PCI: Using configuration type 1 for base access
<6>[ 0.109910] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
<6>[ 0.114016] ACPI: Added _OSI(Module Device)
<6>[ 0.114018] ACPI: Added _OSI(Processor Device)
<6>[ 0.114020] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.114022] ACPI: Added _OSI(Processor Aggregator Device)
<4>[ 0.117431] ACPI: Executed 1 blocks of module-level executable AML code
<4>[ 0.120827] ACPI: Dynamic OEM Table Load:
<4>[ 0.120837] ACPI: SSDT 0xFFFF880119A31000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
<4>[ 0.121542] ACPI: Dynamic OEM Table Load:
<4>[ 0.121548] ACPI: SSDT 0xFFFF880119A0A800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
<4>[ 0.122296] ACPI: Dynamic OEM Table Load:
<4>[ 0.122302] ACPI: SSDT 0xFFFF8801199FFE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
<6>[ 0.123412] ACPI : EC: EC started
<6>[ 1.391050] ACPI: Interpreter enabled
<4>[ 1.391061] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
<4>[ 1.391068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
<6>[ 1.391087] ACPI: (supports S0 S3 S4 S5)
<6>[ 1.391088] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.391131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.400887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
<6>[ 1.400894] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
<6>[ 1.401195] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
<6>[ 1.401365] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
<6>[ 1.401368] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
<6>[ 1.401835] PCI host bridge to bus 0000:00
<6>[ 1.401839] pci_bus 0000:00: root bus resource [bus 00-3e]
<6>[ 1.401842] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 1.401845] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 1.401847] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 1.401849] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
<6>[ 1.401852] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
<6>[ 1.401854] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
<6>[ 1.401856] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
<6>[ 1.401858] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
<6>[ 1.401861] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
<6>[ 1.401863] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
<6>[ 1.401865] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
<6>[ 1.401867] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
<6>[ 1.401870] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
<6>[ 1.401872] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
<6>[ 1.401874] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
<6>[ 1.401877] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
<6>[ 1.401879] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
<7>[ 1.401889] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
<7>[ 1.402015] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
<7>[ 1.402035] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
<7>[ 1.402044] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
<7>[ 1.402051] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
<7>[ 1.402222] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
<7>[ 1.402259] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
<7>[ 1.402472] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 1.402534] pci 0000:00:14.0: System wakeup disabled by ACPI
<7>[ 1.402591] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
<7>[ 1.402632] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b00f 64bit]
<7>[ 1.402706] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
<7>[ 1.402820] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
<7>[ 1.402853] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
<7>[ 1.402923] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
<6>[ 1.403006] pci 0000:00:1a.0: System wakeup disabled by ACPI
<7>[ 1.403065] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
<7>[ 1.403096] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
<7>[ 1.403161] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>[ 1.403225] pci 0000:00:1b.0: System wakeup disabled by ACPI
<7>[ 1.403284] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
<7>[ 1.403319] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
<7>[ 1.403408] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
<6>[ 1.403482] pci 0000:00:1d.0: System wakeup disabled by ACPI
<7>[ 1.403535] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
<7>[ 1.403745] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
<7>[ 1.403777] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
<7>[ 1.403786] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
<7>[ 1.403796] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
<7>[ 1.403807] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
<7>[ 1.403816] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
<7>[ 1.403827] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
<7>[ 1.403863] pci 0000:00:1f.2: PME# supported from D3hot
<7>[ 1.403963] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
<7>[ 1.403988] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
<7>[ 1.404016] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
<6>[ 1.405529] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.405603] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.405670] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.405741] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.405812] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.405880] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.405947] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>[ 1.406017] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<4>[ 1.406202] ACPI: Enabled 4 GPEs in block 00 to 3F
<6>[ 1.406255] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
<6>[ 1.406394] vgaarb: setting as boot device: PCI:0000:00:02.0
<6>[ 1.406397] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
<6>[ 1.406400] vgaarb: loaded
<6>[ 1.406401] vgaarb: bridge control possible 0000:00:02.0
<5>[ 1.406681] SCSI subsystem initialized
<7>[ 1.406737] libata version 3.00 loaded.
<6>[ 1.406770] ACPI: bus type USB registered
<6>[ 1.406794] usbcore: registered new interface driver usbfs
<6>[ 1.406807] usbcore: registered new interface driver hub
<6>[ 1.406831] usbcore: registered new device driver usb
<6>[ 1.407100] PCI: Using ACPI for IRQ routing
<7>[ 1.409074] PCI: pci_cache_line_size set to 64 bytes
<7>[ 1.409125] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
<7>[ 1.409127] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
<7>[ 1.409129] e820: reserve RAM buffer [mem 0xd9203000-0xdbffffff]
<7>[ 1.409132] e820: reserve RAM buffer [mem 0xda700000-0xdbffffff]
<7>[ 1.409134] e820: reserve RAM buffer [mem 0xdad55000-0xdbffffff]
<7>[ 1.409136] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
<7>[ 1.409138] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
<6>[ 1.409287] NetLabel: Initializing
<6>[ 1.409288] NetLabel: domain hash size = 128
<6>[ 1.409289] NetLabel: protocols = UNLABELED CIPSOv4
<6>[ 1.409306] NetLabel: unlabeled traffic allowed by default
<6>[ 1.409411] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
<6>[ 1.409418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
<6>[ 1.412478] clocksource: Switched to clocksource hpet
<6>[ 1.420214] AppArmor: AppArmor Filesystem Enabled
<6>[ 1.420303] pnp: PnP ACPI init
<6>[ 1.420422] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
<7>[ 1.420427] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<6>[ 1.420548] system 00:01: [io 0x0680-0x069f] has been reserved
<6>[ 1.420551] system 00:01: [io 0x1000-0x100f] has been reserved
<6>[ 1.420553] system 00:01: [io 0xffff] has been reserved
<6>[ 1.420556] system 00:01: [io 0xffff] has been reserved
<6>[ 1.420558] system 00:01: [io 0x0400-0x0453] could not be reserved
<6>[ 1.420561] system 00:01: [io 0x0458-0x047f] has been reserved
<6>[ 1.420563] system 00:01: [io 0x0500-0x057f] has been reserved
<6>[ 1.420566] system 00:01: [io 0x164e-0x164f] has been reserved
<7>[ 1.420570] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 1.420605] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
<6>[ 1.420665] system 00:03: [io 0x0454-0x0457] has been reserved
<7>[ 1.420669] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
<6>[ 1.420729] system 00:04: [io 0x04d0-0x04d1] has been reserved
<7>[ 1.420732] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[ 1.421020] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>[ 1.421023] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
<6>[ 1.421025] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
<6>[ 1.421028] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
<6>[ 1.421031] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
<6>[ 1.421033] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
<6>[ 1.421036] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
<6>[ 1.421039] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
<6>[ 1.421041] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
<6>[ 1.421044] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[ 1.421047] system 00:05: [mem 0xdfa00000-0xdfa00fff] has been reserved
<7>[ 1.421050] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[ 1.421894] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
<6>[ 1.421897] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
<7>[ 1.421901] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
<6>[ 1.421955] pnp: PnP ACPI: found 7 devices
<6>[ 1.429125] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<7>[ 1.429141] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<7>[ 1.429144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<7>[ 1.429146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[ 1.429149] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
<7>[ 1.429151] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
<7>[ 1.429153] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
<7>[ 1.429156] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
<7>[ 1.429158] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
<7>[ 1.429160] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
<7>[ 1.429163] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
<7>[ 1.429165] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
<7>[ 1.429167] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
<7>[ 1.429170] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
<7>[ 1.429172] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
<7>[ 1.429174] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
<7>[ 1.429177] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
<7>[ 1.429179] pci_bus 0000:00: resource 20 [mem 0xdfa00000-0xfeafffff window]
<6>[ 1.429220] NET: Registered protocol family 2
<6>[ 1.429422] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<6>[ 1.429527] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
<6>[ 1.429604] TCP: Hash tables configured (established 32768 bind 32768)
<6>[ 1.429633] UDP hash table entries: 2048 (order: 4, 65536 bytes)
<6>[ 1.429653] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
<6>[ 1.429714] NET: Registered protocol family 1
<7>[ 1.429734] pci 0000:00:02.0: Video device with shadowed ROM
<6>[ 1.429746] pci 0000:00:14.0: enabling device (0000 -> 0002)
<6>[ 1.430024] pci 0000:00:1a.0: enabling device (0000 -> 0002)
<7>[ 1.448656] PCI: CLS 64 bytes, default 64
<6>[ 1.448726] Trying to unpack rootfs image as initramfs...
<6>[ 1.916766] Freeing initrd memory: 19796K (ffff880035946000 - ffff880036c9b000)
<6>[ 1.916814] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 1.916818] software IO TLB [mem 0xd383f000-0xd783f000] (64MB) mapped at [ffff8800d383f000-ffff8800d783efff]
<6>[ 1.916923] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
<6>[ 1.916925] hw unit of domain pp0-core 2^-16 Joules
<6>[ 1.916927] hw unit of domain package 2^-16 Joules
<6>[ 1.916928] hw unit of domain pp1-gpu 2^-16 Joules
<6>[ 1.917082] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x13
<6>[ 1.917094] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x13
<6>[ 1.917104] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x13
<6>[ 1.917115] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x13
<6>[ 1.917186] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
<6>[ 1.917223] Scanning for low memory corruption every 60 seconds
<6>[ 1.917636] futex hash table entries: 1024 (order: 4, 65536 bytes)
<5>[ 1.917658] Initialise system trusted keyring
<6>[ 1.917691] audit: initializing netlink subsys (disabled)
<5>[ 1.917706] audit: type=2000 audit(1438755260.916:1): initialized
<6>[ 1.918230] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<6>[ 1.920311] zpool: loaded
<6>[ 1.920314] zbud: loaded
<5>[ 1.920558] VFS: Disk quotas dquot_6.6.0
<6>[ 1.920605] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 1.921290] fuse init (API version 7.23)
<5>[ 1.921485] Key type big_key registered
<5>[ 1.921966] Key type asymmetric registered
<5>[ 1.921971] Asymmetric key parser 'x509' registered
<6>[ 1.921989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[ 1.922040] io scheduler noop registered
<6>[ 1.922045] io scheduler deadline registered (default)
<6>[ 1.922102] io scheduler cfq registered
<6>[ 1.922207] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[ 1.922217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[ 1.922268] efifb: probing for efifb
<6>[ 1.922286] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 8128k, total 8128k
<6>[ 1.922288] efifb: mode is 1920x1080x32, linelength=7680, pages=1
<6>[ 1.922289] efifb: scrolling: redraw
<6>[ 1.922292] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<6>[ 1.930486] Console: switching to colour frame buffer device 240x67
<6>[ 1.938513] fb0: EFI VGA frame buffer device
<7>[ 1.938528] intel_idle: MWAIT substates: 0x21120
<7>[ 1.938530] intel_idle: v0.4 model 0x3A
<7>[ 1.938532] intel_idle: lapic_timer_reliable_states 0xffffffff
<6>[ 1.939343] ACPI: AC Adapter [AC0] (off-line)
<6>[ 1.939422] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C0D:00/input/input0
<6>[ 1.939448] ACPI: Lid Switch [LID0]
<6>[ 1.939507] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[ 1.939512] ACPI: Power Button [PWRF]
<4>[ 1.942221] [Firmware Bug]: Invalid critical threshold (86)
<6>[ 1.945006] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 1.945010] ACPI: Thermal Zone [TZ0] (-267 C)
<6>[ 1.945061] GHES: HEST is not enabled!
<6>[ 1.945210] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 1.954650] Linux agpgart interface v0.103
<6>[ 1.958586] brd: module loaded
<6>[ 1.959854] loop: module loaded
<6>[ 1.960152] libphy: Fixed MDIO Bus: probed
<6>[ 1.960157] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.960159] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.960265] PPP generic driver version 2.4.2
<6>[ 1.960549] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 1.960558] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
<6>[ 1.960664] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
<7>[ 1.960674] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
<6>[ 1.960844] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.960847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.960849] usb usb1: Product: xHCI Host Controller
<6>[ 1.960851] usb usb1: Manufacturer: Linux 4.2.0-rc3 xhci-hcd
<6>[ 1.960853] usb usb1: SerialNumber: 0000:00:14.0
<6>[ 1.961026] hub 1-0:1.0: USB hub found
<6>[ 1.961040] hub 1-0:1.0: 4 ports detected
<6>[ 1.961649] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 1.961654] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
<6>[ 1.961758] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
<6>[ 1.961760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.961762] usb usb2: Product: xHCI Host Controller
<6>[ 1.961764] usb usb2: Manufacturer: Linux 4.2.0-rc3 xhci-hcd
<6>[ 1.961766] usb usb2: SerialNumber: 0000:00:14.0
<6>[ 1.961928] hub 2-0:1.0: USB hub found
<6>[ 1.961942] hub 2-0:1.0: 4 ports detected
<6>[ 1.962537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.962548] ehci-pci: EHCI PCI platform driver
<6>[ 1.962718] ehci-pci 0000:00:1a.0: EHCI Host Controller
<6>[ 1.962724] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>[ 1.962743] ehci-pci 0000:00:1a.0: debug port 2
<6>[ 1.965118] ACPI: Battery Slot [BAT0] (battery present)
<7>[ 1.966667] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
<6>[ 1.966689] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
<6>[ 1.976761] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
<6>[ 1.976813] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.976815] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.976818] usb usb3: Product: EHCI Host Controller
<6>[ 1.976820] usb usb3: Manufacturer: Linux 4.2.0-rc3 ehci_hcd
<6>[ 1.976822] usb usb3: SerialNumber: 0000:00:1a.0
<6>[ 1.977003] hub 3-0:1.0: USB hub found
<6>[ 1.977010] hub 3-0:1.0: 2 ports detected
<6>[ 1.977287] ehci-pci 0000:00:1d.0: EHCI Host Controller
<6>[ 1.977293] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
<6>[ 1.977313] ehci-pci 0000:00:1d.0: debug port 2
<7>[ 1.981228] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
<6>[ 1.981246] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
<6>[ 1.992805] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
<6>[ 1.992861] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.992864] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.992866] usb usb4: Product: EHCI Host Controller
<6>[ 1.992869] usb usb4: Manufacturer: Linux 4.2.0-rc3 ehci_hcd
<6>[ 1.992871] usb usb4: SerialNumber: 0000:00:1d.0
<6>[ 1.993102] hub 4-0:1.0: USB hub found
<6>[ 1.993113] hub 4-0:1.0: 2 ports detected
<6>[ 1.993288] ehci-platform: EHCI generic platform driver
<6>[ 1.993302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.993309] ohci-pci: OHCI PCI platform driver
<6>[ 1.993322] ohci-platform: OHCI generic platform driver
<6>[ 1.993333] uhci_hcd: USB Universal Host Controller Interface driver
<6>[ 1.993400] i8042: PNP: No PS/2 controller found. Probing ports directly.
<6>[ 2.272890] usb 1-3: new high-speed USB device number 2 using xhci_hcd
<6>[ 2.292917] usb 3-1: new high-speed USB device number 2 using ehci-pci
<6>[ 2.407212] usb 1-3: New USB device found, idVendor=1286, idProduct=2043
<6>[ 2.407216] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 2.407219] usb 1-3: Product: Marvell Wireless Device
<6>[ 2.407223] usb 1-3: Manufacturer: Marvell
<6>[ 2.407226] usb 1-3: SerialNumber: 0000000000000000
<6>[ 2.425351] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
<6>[ 2.425356] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[ 2.425648] hub 3-1:1.0: USB hub found
<6>[ 2.425699] hub 3-1:1.0: 6 ports detected
<3>[ 2.536149] i8042: Can't read CTR while initializing i8042
<4>[ 2.536208] i8042: probe of i8042 failed with error -5
<6>[ 2.536537] mousedev: PS/2 mouse device common for all mice
<6>[ 2.536856] rtc_cmos 00:02: RTC can wake from S4
<6>[ 2.537011] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>[ 2.537056] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
<6>[ 2.537153] device-mapper: uevent: version 1.0.3
<6>[ 2.537322] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
<6>[ 2.537350] Intel P-state driver initializing.
<6>[ 2.537602] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 2.537617] EFI Variables Facility v0.08 2004-May-17
<6>[ 2.567282] NET: Registered protocol family 10
<6>[ 2.567757] NET: Registered protocol family 17
<5>[ 2.567790] Key type dns_resolver registered
<5>[ 2.568735] Loading compiled-in X.509 certificates
<5>[ 2.569865] Loaded X.509 cert 'Build time autogenerated kernel key: 256b82d244e08151b975440d13fe5231319da4aa'
<6>[ 2.569881] registered taskstats version 1
<6>[ 2.569902] zswap: loading zswap
<6>[ 2.569904] zswap: using zbud pool
<6>[ 2.569908] zswap: using lzo compressor
<5>[ 2.571950] Key type trusted registered
<5>[ 2.575321] Key type encrypted registered
<6>[ 2.575329] AppArmor: AppArmor sha1 policy hashing enabled
<6>[ 2.575332] ima: No TPM chip found, activating TPM-bypass!
<6>[ 2.575357] evm: HMAC attrs: 0x1
<6>[ 2.575579] Magic number: 11:189:215
<6>[ 2.575599] event_source software: hash matches
<6>[ 2.575677] rtc_cmos 00:02: setting system clock to 2015-08-05 06:14:21 UTC (1438755261)
<6>[ 2.575744] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>[ 2.575745] EDD information not available.
<7>[ 2.575832] PM: Hibernation image not present or could not be loaded.
<6>[ 2.576131] Freeing unused kernel memory: 1452K (ffffffff81d49000 - ffffffff81eb4000)
<6>[ 2.576133] Write protecting the kernel read-only data: 12288k
<6>[ 2.576370] Freeing unused kernel memory: 400K (ffff88000179c000 - ffff880001800000)
<6>[ 2.576457] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
<5>[ 2.586256] random: systemd-udevd urandom read with 10 bits of entropy available
<7>[ 2.611600] ahci 0000:00:1f.2: version 3.0
<6>[ 2.611788] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
<6>[ 2.611791] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
<6>[ 2.612384] scsi host0: ahci
<6>[ 2.612504] scsi host1: ahci
<6>[ 2.612617] scsi host2: ahci
<6>[ 2.612729] scsi host3: ahci
<6>[ 2.612836] scsi host4: ahci
<6>[ 2.612940] scsi host5: ahci
<6>[ 2.612992] ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16100 irq 27
<6>[ 2.612993] ata2: DUMMY
<6>[ 2.612994] ata3: DUMMY
<6>[ 2.612995] ata4: DUMMY
<6>[ 2.612996] ata5: DUMMY
<6>[ 2.612997] ata6: DUMMY
<6>[ 2.697148] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
<6>[ 2.745164] usb 4-1: new high-speed USB device number 2 using ehci-pci
<6>[ 2.806321] usb 3-1.1: New USB device found, idVendor=045e, idProduct=0795
<6>[ 2.806338] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 2.806340] usb 3-1.1: Product: Rear LifeCam
<6>[ 2.806341] usb 3-1.1: Manufacturer: Microsoft
<6>[ 2.877741] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
<6>[ 2.877743] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[ 2.878105] hub 4-1:1.0: USB hub found
<6>[ 2.878161] hub 4-1:1.0: 8 ports detected
<6>[ 2.917252] tsc: Refined TSC clocksource calibration: 1696.147 MHz
<6>[ 2.917255] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872ef8535c, max_idle_ns: 440795255355 ns
<6>[ 2.933268] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<4>[ 2.933635] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
<4>[ 2.933640] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011a8b64b0), AE_NOT_FOUND (20150619/psparse-536)
<6>[ 2.933884] ata1.00: ATA-9: C400-MTFDDAT064MAM, 07MH, max UDMA/100
<6>[ 2.933887] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<4>[ 2.934348] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
<4>[ 2.934353] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88011a8b64b0), AE_NOT_FOUND (20150619/psparse-536)
<6>[ 2.934600] ata1.00: configured for UDMA/100
<5>[ 2.934826] scsi 0:0:0:0: Direct-Access ATA C400-MTFDDAT064M 07MH PQ: 0 ANSI: 5
<5>[ 2.935293] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 2.935296] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
<5>[ 2.935414] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 2.935418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 2.935516] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 2.937270] sda: sda1 sda2 sda3
<5>[ 2.937926] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 2.969284] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 3.057923] systemd[1]: Inserted module 'autofs4'
<7>[ 3.115974] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
<7>[ 3.116104] systemd[1]: Detected architecture x86-64.
<7>[ 3.117364] systemd[1]: Set hostname to <touco>.
<6>[ 3.149302] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
<7>[ 3.212497] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
<7>[ 3.212507] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
<7>[ 3.232004] systemd[1]: Cannot add dependency job for unit gssproxy.service, ignoring: Unit gssproxy.service failed to load: No such file or directory.
<7>[ 3.232014] systemd[1]: Cannot add dependency job for unit nfs-blkmap.service, ignoring: Unit nfs-blkmap.service failed to load: No such file or directory.
<7>[ 3.232838] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
<7>[ 3.232850] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
<7>[ 3.232870] systemd[1]: Reached target Encrypted Volumes.
<7>[ 3.232877] systemd[1]: Starting Encrypted Volumes.
<7>[ 3.232915] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
<7>[ 3.232922] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
<7>[ 3.232965] systemd[1]: Created slice Root Slice.
<7>[ 3.232972] systemd[1]: Starting Root Slice.
<7>[ 3.233053] systemd[1]: Created slice System Slice.
<7>[ 3.233066] systemd[1]: Starting System Slice.
<7>[ 3.233625] systemd[1]: Starting Increase datagram queue length...
<7>[ 3.233770] systemd[1]: Created slice system-systemd\x2dfsck.slice.
<7>[ 3.233783] systemd[1]: Starting system-systemd\x2dfsck.slice.
<7>[ 3.233844] systemd[1]: Listening on udev Control Socket.
<7>[ 3.233853] systemd[1]: Starting udev Control Socket.
<7>[ 3.233890] systemd[1]: Listening on Delayed Shutdown Socket.
<7>[ 3.233899] systemd[1]: Starting Delayed Shutdown Socket.
<7>[ 3.233940] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
<7>[ 3.233950] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
<7>[ 3.234046] systemd[1]: Listening on Journal Audit Socket.
<7>[ 3.234055] systemd[1]: Starting Journal Audit Socket.
<7>[ 3.234088] systemd[1]: Listening on fsck to fsckd communication Socket.
<7>[ 3.234096] systemd[1]: Starting fsck to fsckd communication Socket.
<7>[ 3.234139] systemd[1]: Listening on Journal Socket (/dev/log).
<7>[ 3.234151] systemd[1]: Starting Journal Socket (/dev/log).
<7>[ 3.234247] systemd[1]: Created slice User and Session Slice.
<7>[ 3.234256] systemd[1]: Starting User and Session Slice.
<7>[ 3.234354] systemd[1]: Created slice system-getty.slice.
<7>[ 3.234362] systemd[1]: Starting system-getty.slice.
<7>[ 3.234406] systemd[1]: Listening on Journal Socket.
<7>[ 3.234423] systemd[1]: Starting Journal Socket.
<7>[ 3.234441] systemd[1]: Started Kernel Module supporting RPCSEC_GSS.
<7>[ 3.235030] systemd[1]: Starting Nameserver information manager...
<7>[ 3.238380] systemd[1]: Started Set Up Additional Binary Formats.
<7>[ 3.241074] systemd[1]: Starting Load Kernel Modules...
<7>[ 3.241880] systemd[1]: Starting Setup Virtual Console...
<7>[ 3.242807] systemd[1]: Started Read required files in advance.
<7>[ 3.243091] systemd[1]: Starting Read required files in advance...
<6>[ 3.243702] usb 4-1.5: New USB device found, idVendor=045e, idProduct=07a9
<6>[ 3.243705] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 3.243707] usb 4-1.5: Product: SAM
<6>[ 3.243709] usb 4-1.5: Manufacturer: MICROSOFT
<6>[ 3.243710] usb 4-1.5: SerialNumber: 0.1.0000
<7>[ 3.244168] systemd[1]: Mounting POSIX Message Queue File System...
<7>[ 3.245154] systemd[1]: Mounting Debug File System...
<7>[ 3.245906] systemd[1]: Started Braille Device Support.
<7>[ 3.245988] systemd[1]: Starting Braille Device Support...
<7>[ 3.246932] systemd[1]: Starting Create list of required static device nodes for the current kernel...
<7>[ 3.248327] systemd[1]: Mounting Huge Pages File System...
<7>[ 3.250144] systemd[1]: Starting Uncomplicated firewall...
<7>[ 3.252647] systemd[1]: Mounting RPC Pipe File System...
<7>[ 3.252771] systemd[1]: Listening on udev Kernel Socket.
<7>[ 3.252798] systemd[1]: Starting udev Kernel Socket.
<7>[ 3.253998] systemd[1]: Starting udev Coldplug all Devices...
<7>[ 3.254060] systemd[1]: Reached target Slices.
<7>[ 3.254087] systemd[1]: Starting Slices.
<7>[ 3.255230] systemd[1]: Mounted POSIX Message Queue File System.
<7>[ 3.255276] systemd[1]: Mounted Huge Pages File System.
<7>[ 3.255310] systemd[1]: Mounted Debug File System.
<7>[ 3.255630] systemd[1]: Started Increase datagram queue length.
<7>[ 3.257593] systemd[1]: Started Setup Virtual Console.
<7>[ 3.258421] systemd[1]: Started Create list of required static device nodes for the current kernel.
<7>[ 3.258882] systemd[1]: Started Uncomplicated firewall.
<6>[ 3.263060] lp: driver loaded but no devices found
<7>[ 3.264133] systemd[1]: Started Nameserver information manager.
<6>[ 3.269941] ppdev: user-space parallel port driver
<6>[ 3.275220] RPC: Registered named UNIX socket transport module.
<6>[ 3.275224] RPC: Registered udp transport module.
<6>[ 3.275226] RPC: Registered tcp transport module.
<6>[ 3.275228] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 3.276344] systemd[1]: Started Load Kernel Modules.
<7>[ 3.276565] systemd[1]: Mounted RPC Pipe File System.
<7>[ 3.279853] systemd[1]: ureadahead.service: main process exited, code=exited, status=5/NOTINSSTALLED
<7>[ 3.280301] systemd[1]: Unit ureadahead.service entered failed state.
<7>[ 3.280333] systemd[1]: ureadahead.service failed.
<7>[ 3.296960] systemd[1]: Started udev Coldplug all Devices.
<7>[ 3.301759] systemd[1]: Starting udev Wait for Complete Device Initialization...
<7>[ 3.302409] systemd[1]: Mounting FUSE Control File System...
<7>[ 3.302533] systemd[1]: Mounted Configuration File System.
<7>[ 3.303440] systemd[1]: Starting Apply Kernel Variables...
<7>[ 3.304462] systemd[1]: Starting Create Static Device Nodes in /dev...
<7>[ 3.304546] systemd[1]: Listening on Syslog Socket.
<7>[ 3.304590] systemd[1]: Starting Syslog Socket.
<7>[ 3.305514] systemd[1]: Starting Journal Service...
<7>[ 3.308054] systemd[1]: Mounted FUSE Control File System.
<7>[ 3.312798] systemd[1]: Started Apply Kernel Variables.
<6>[ 3.313375] usb 4-1.6: new full-speed USB device number 4 using ehci-pci
<7>[ 3.318960] systemd[1]: Started Create Static Device Nodes in /dev.
<7>[ 3.319651] systemd[1]: Starting udev Kernel Device Manager...
<7>[ 3.340968] systemd[1]: Started Journal Service.
<6>[ 3.414526] usb 4-1.6: New USB device found, idVendor=03eb, idProduct=8209
<6>[ 3.414531] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 3.414534] usb 4-1.6: Product: Atmel maXTouch Digitizer
<6>[ 3.414537] usb 4-1.6: Manufacturer: Atmel
<4>[ 3.438667] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
<6>[ 3.438676] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 3.438680] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
<6>[ 3.438685] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 3.438687] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
<6>[ 3.438692] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 3.438693] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
<6>[ 3.438698] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 3.438700] lpc_ich: Resource conflict(s) found affecting gpio_ich
<6>[ 3.441017] [drm] Initialized drm 1.1.0 20060810
<6>[ 3.459463] media: Linux media interface: v0.10
<6>[ 3.468155] Linux video capture interface: v2.00
<6>[ 3.483668] AVX version of gcm_enc/dec engaged.
<6>[ 3.483671] AES CTR mode by8 optimization enabled
<6>[ 3.489476] usb 4-1.7: new high-speed USB device number 5 using ehci-pci
<6>[ 3.490724] uvcvideo: Found UVC 1.00 device Rear LifeCam (045e:0795)
<6>[ 3.495084] [drm] Memory usable by graphics device = 2048M
<7>[ 3.495090] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
<6>[ 3.495092] fb: switching to inteldrmfb from EFI VGA
<6>[ 3.495117] Console: switching to colour dummy device 80x25
<6>[ 3.508661] [drm] Replacing VGA console driver
<6>[ 3.527432] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[ 3.527436] [drm] Driver supports precise vblank timestamp query.
<6>[ 3.527556] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
<6>[ 3.556997] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 3.557337] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
<6>[ 3.557744] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
<6>[ 3.558085] input: Rear LifeCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3
<6>[ 3.558173] usbcore: registered new interface driver uvcvideo
<6>[ 3.558175] USB Video Class driver (1.1.1)
<6>[ 3.569384] fbcon: inteldrmfb (fb0) is primary device
<6>[ 3.578083] intel_rapl: Found RAPL domain package
<6>[ 3.578085] intel_rapl: Found RAPL domain core
<6>[ 3.578087] intel_rapl: Found RAPL domain uncore
<6>[ 3.585320] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
<6>[ 3.598231] usb 4-1.7: New USB device found, idVendor=045e, idProduct=0794
<6>[ 3.598232] usb 4-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 3.598233] usb 4-1.7: Product: Front LifeCam
<6>[ 3.598234] usb 4-1.7: Manufacturer: Microsoft
<6>[ 3.599379] uvcvideo: Found UVC 1.00 device Front LifeCam (045e:0794)
<6>[ 3.600901] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC280: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
<6>[ 3.600902] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6>[ 3.600903] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
<6>[ 3.600904] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
<6>[ 3.600905] snd_hda_codec_realtek hdaudioC0D0: inputs:
<6>[ 3.600906] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
<6>[ 3.600907] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
<6>[ 3.613122] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
<6>[ 3.613216] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
<6>[ 3.613304] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
<6>[ 3.665308] input: Front LifeCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input7
<6>[ 3.675923] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 3.694007] usbcore: registered new interface driver usbhid
<6>[ 3.694008] usbhid: USB HID core driver
<6>[ 3.699963] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:03EB:8209.0004/input/input8
<6>[ 3.700084] hid-multitouch 0003:03EB:8209.0004: input,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1d.0-1.6/input0
<6>[ 3.700974] input: MICROSOFT SAM as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:045E:07A9.0002/input/input9
<6>[ 3.754027] hid-generic 0003:045E:07A9.0002: input,hidraw1: USB HID v1.11 Keyboard [MICROSOFT SAM] on usb-0000:00:1d.0-1.5/input1
<6>[ 3.756652] input: MICROSOFT SAM as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:045E:07A9.0003/input/input10
<6>[ 3.866220] hid-generic 0003:045E:07A9.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [MICROSOFT SAM] on usb-0000:00:1d.0-1.5/input2
<6>[ 3.867990] hid-generic 0003:03EB:8209.0005: hiddev0,hidraw3: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1d.0-1.6/input1
<6>[ 3.917818] clocksource: Switched to clocksource tsc
<6>[ 4.278797] Console: switching to colour frame buffer device 240x67
<6>[ 4.283980] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
<6>[ 4.283981] i915 0000:00:02.0: registered panic notifier
<6>[ 4.290463] Adding 4075516k swap on /dev/sda3. Priority:-1 extents:1 across:4075516k SSFS
<5>[ 4.420404] random: nonblocking pool is initialized
<6>[ 4.518090] cfg80211: Calling CRDA to update world regulatory domain
<5>[ 4.525897] mwifiex: rx work enabled, cpus 4
<6>[ 4.526170] usbcore: registered new interface driver mwifiex_usb
<6>[ 4.532598] usb 1-3: start to download FW...
<6>[ 4.539793] cfg80211: World regulatory domain updated:
<6>[ 4.539798] cfg80211: DFS Master region: unset
<6>[ 4.539799] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
<6>[ 4.539803] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
<6>[ 4.539805] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
<6>[ 4.539807] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
<6>[ 4.539810] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
<6>[ 4.539813] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
<6>[ 4.539815] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
<6>[ 4.539818] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
<6>[ 4.539820] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
<6>[ 4.570420] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
<7>[ 4.584645] systemd-journald[265]: Received request to flush runtime journal from PID 1
<5>[ 4.683134] audit: type=1400 audit(1438755263.601:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=478 comm="apparmor_parser"
<5>[ 4.683150] audit: type=1400 audit(1438755263.601:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=478 comm="apparmor_parser"
<5>[ 4.685816] audit: type=1400 audit(1438755263.601:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=478 comm="apparmor_parser"
<5>[ 4.685831] audit: type=1400 audit(1438755263.601:5): apparmor="STATUS" operation="profile_load" name="chromium" pid=478 comm="apparmor_parser"
<5>[ 4.688562] audit: type=1400 audit(1438755263.605:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=478 comm="apparmor_parser"
<5>[ 4.688569] audit: type=1400 audit(1438755263.605:7): apparmor="STATUS" operation="profile_load" name="chromium" pid=478 comm="apparmor_parser"
<5>[ 4.691592] audit: type=1400 audit(1438755263.609:8): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=478 comm="apparmor_parser"
<5>[ 4.691601] audit: type=1400 audit(1438755263.609:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
<5>[ 4.691607] audit: type=1400 audit(1438755263.609:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=478 comm="apparmor_parser"
<6>[ 5.580813] usb 1-3: info: FW download over, size 551720 bytes
<6>[ 5.580826] usb 1-3: info: mwifiex_fw_dpc: unregister device
<6>[ 5.778157] usb 1-3: USB disconnect, device number 2
<3>[ 5.778210] mwifiex_usb: mwifiex_usb_disconnect: card or card->adapter is NULL
<6>[ 6.442861] usb 1-3: new high-speed USB device number 3 using xhci_hcd
<6>[ 6.572054] usb 1-3: New USB device found, idVendor=1286, idProduct=2044
<6>[ 6.572065] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 6.572080] usb 1-3: Product: Bluetooth and Wireless LAN Composite Device
<6>[ 6.572081] usb 1-3: Manufacturer: Marvell
<6>[ 6.572083] usb 1-3: SerialNumber: 6045BDF646B4
<4>[ 6.572265] usb 1-3: ep 0x4 - rounding interval to 128 microframes, ep desc says 255 microframes
<5>[ 6.575195] mwifiex: rx work enabled, cpus 4
<6>[ 6.575652] usb 1-3: WLAN FW is active
<6>[ 6.588919] Bluetooth: Core ver 2.20
<6>[ 6.588967] NET: Registered protocol family 31
<6>[ 6.588970] Bluetooth: HCI device and connection manager initialized
<6>[ 6.588975] Bluetooth: HCI socket layer initialized
<6>[ 6.588978] Bluetooth: L2CAP socket layer initialized
<6>[ 6.588985] Bluetooth: SCO socket layer initialized
<6>[ 6.595451] usbcore: registered new interface driver btusb
<6>[ 6.613309] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 6.613312] Bluetooth: BNEP filters: protocol multicast
<6>[ 6.613317] Bluetooth: BNEP socket layer initialized
<6>[ 6.815732] usb 1-3: info: MWIFIEX VERSION: mwifiex 1.0 (14.68.29.p38)
<6>[ 6.815738] usb 1-3: driver_version = mwifiex 1.0 (14.68.29.p38)
<6>[ 6.932664] Bluetooth: RFCOMM TTY layer initialized
<6>[ 6.932671] Bluetooth: RFCOMM socket layer initialized
<6>[ 6.932675] Bluetooth: RFCOMM ver 1.11
<6>[ 10.832650] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
<6>[ 10.849649] usb 1-3: info: associated to bssid f4:ca:e5:ef:be:18 successfully
<6>[ 11.060160] usb 1-3: data: -ENOSR is returned
<6>[ 11.251020] usb 1-3: Rx of mgmt packet failed
<6>[ 32.971255] usb 1-3: Rx of mgmt packet failed
<6>[ 165.954809] usb 1-3: data: -ENOSR is returned
<6>[ 237.022120] usb 1-3: mwifiex_cmd_timeout_func: Timeout cmd id = 0xa4, act = 0x0
<6>[ 237.022152] usb 1-3: num_data_h2c_failure = 0
<6>[ 237.022163] usb 1-3: num_cmd_h2c_failure = 0
<6>[ 237.022171] usb 1-3: is_cmd_timedout = 1
<6>[ 237.022180] usb 1-3: num_tx_timeout = 0
<6>[ 237.022188] usb 1-3: last_cmd_index = 2
<6>[ 237.022197] usb 1-3: last_cmd_id: 7f 00 16 00 a4 00 16 00 a4 00
<6>[ 237.022205] usb 1-3: last_cmd_act: 00 00 00 00 00 00 00 00 00 00
<6>[ 237.022213] usb 1-3: last_cmd_resp_index = 1
<6>[ 237.022222] usb 1-3: last_cmd_resp_id: 7f 80 16 80 7f 80 16 80 a4 80
<6>[ 237.022231] usb 1-3: last_event_index = 3
<6>[ 237.022239] usb 1-3: last_event: 00 00 17 00 2b 00 33 00 00 00
<6>[ 237.022248] usb 1-3: data_sent=0 cmd_sent=0
<6>[ 237.022257] usb 1-3: ps_mode=1 ps_state=0
<6>[ 237.022275] usb 1-3: cmd timeout
<6>[ 237.022437] usb 1-3: failed to get signal information
<6>[ 237.022674] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 237.022683] usb 1-3: failed to get signal information
<6>[ 237.023090] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 237.023099] usb 1-3: failed to get signal information
<6>[ 237.023173] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 237.023180] usb 1-3: failed to get signal information
<6>[ 243.011258] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 243.011262] usb 1-3: failed to get signal information
<6>[ 243.011275] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 243.011277] usb 1-3: failed to get signal information
<6>[ 249.009934] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 249.009943] usb 1-3: failed to get signal information
<6>[ 249.009983] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 249.009986] usb 1-3: failed to get signal information
<6>[ 255.011171] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 255.011181] usb 1-3: failed to get signal information
<6>[ 255.011220] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 255.011224] usb 1-3: failed to get signal information
<6>[ 261.016714] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 261.016727] usb 1-3: failed to get signal information
<6>[ 261.016808] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 261.016816] usb 1-3: failed to get signal information
<6>[ 267.021748] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 267.021758] usb 1-3: failed to get signal information
<6>[ 267.021803] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 267.021807] usb 1-3: failed to get signal information
<6>[ 272.405198] usb 1-3: data: -ENOSR is returned
<6>[ 273.023705] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 273.023715] usb 1-3: failed to get signal information
<6>[ 273.023759] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 273.023764] usb 1-3: failed to get signal information
<6>[ 279.026665] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 279.026675] usb 1-3: failed to get signal information
<6>[ 279.026719] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 279.026724] usb 1-3: failed to get signal information
<6>[ 285.029612] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 285.029622] usb 1-3: failed to get signal information
<6>[ 285.029666] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 285.029670] usb 1-3: failed to get signal information
<6>[ 291.031554] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 291.031564] usb 1-3: failed to get signal information
<6>[ 291.031603] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 291.031607] usb 1-3: failed to get signal information
<6>[ 297.034504] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 297.034514] usb 1-3: failed to get signal information
<6>[ 297.034558] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 297.034562] usb 1-3: failed to get signal information
<6>[ 303.036469] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 303.036479] usb 1-3: failed to get signal information
<6>[ 303.036523] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 303.036527] usb 1-3: failed to get signal information
<6>[ 309.036519] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 309.036530] usb 1-3: failed to get signal information
<6>[ 309.036574] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 309.036579] usb 1-3: failed to get signal information
<6>[ 315.042354] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 315.042358] usb 1-3: failed to get signal information
<6>[ 315.042374] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 315.042375] usb 1-3: failed to get signal information
<6>[ 321.042562] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 321.042572] usb 1-3: failed to get signal information
<6>[ 321.042616] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 321.042621] usb 1-3: failed to get signal information
<6>[ 327.047530] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 327.047540] usb 1-3: failed to get signal information
<6>[ 327.047584] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 327.047588] usb 1-3: failed to get signal information
<6>[ 333.047795] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 333.047805] usb 1-3: failed to get signal information
<6>[ 333.047849] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 333.047853] usb 1-3: failed to get signal information
<6>[ 339.051755] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 339.051765] usb 1-3: failed to get signal information
<6>[ 339.051808] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 339.051812] usb 1-3: failed to get signal information
<6>[ 345.054688] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 345.054696] usb 1-3: failed to get signal information
<6>[ 345.054733] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 345.054736] usb 1-3: failed to get signal information
<6>[ 351.057432] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 351.057436] usb 1-3: failed to get signal information
<6>[ 351.057449] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 351.057451] usb 1-3: failed to get signal information
<6>[ 357.059336] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 357.059346] usb 1-3: failed to get signal information
<6>[ 357.059390] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 357.059394] usb 1-3: failed to get signal information
<4>[ 360.882604] ------------[ cut here ]------------
<4>[ 360.882662] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x228/0x240()
<6>[ 360.882671] NETDEV WATCHDOG: mlan0 (usb): transmit queue 1 timed out
<4>[ 360.882676] Modules linked in: rfcomm bnep btusb btrtl btbcm btintel bluetooth binfmt_misc nls_iso8859_1 mwifiex_usb mwifiex cfg80211 hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_als hid_sensor_gyro_3d hid_sensor_incl_3d hid_sensor_rotation hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common joydev hid_sensor_hub hid_multitouch hid_generic usbhid hid snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec intel_rapl iosf_mbi x86_pkg_temp_thermal snd_hda_core intel_powerclamp snd_hwdep coretemp snd_pcm kvm_intel kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_seq uvcvideo i915 aesni_intel videobuf2_vmalloc videobuf2_memops videobuf2_core aes_x86_64 v4l2_common lrw
<4>[ 360.882772] videodev gf128mul glue_helper ablk_helper snd_seq_device media cryptd snd_timer snd drm_kms_helper drm lpc_ich mei_me mei soundcore i2c_algo_bit tpm_infineon mac_hid video sunrpc parport_pc ppdev lp parport autofs4 ahci libahci
<4>[ 360.882825] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc3 #3
<4>[ 360.882833] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.00.0250 01/08/2013
<4>[ 360.882841] ffffffff81b44c89 ffff88011f203d58 ffffffff8178d2f0 0000000000000000
<4>[ 360.882852] ffff88011f203da8 ffff88011f203d98 ffffffff81074faa ffff88011f203db8
<4>[ 360.882862] 0000000000000001 ffff8800d213c500 0000000000000000 ffff8801194b0000
<4>[ 360.882872] Call Trace:
<4>[ 360.882878] <IRQ> [<ffffffff8178d2f0>] dump_stack+0x45/0x57
<4>[ 360.882904] [<ffffffff81074faa>] warn_slowpath_common+0x8a/0xc0
<4>[ 360.882918] [<ffffffff81075026>] warn_slowpath_fmt+0x46/0x50
<4>[ 360.882929] [<ffffffff816b3898>] dev_watchdog+0x228/0x240
<4>[ 360.882940] [<ffffffff816b3670>] ? dev_deactivate_queue.constprop.34+0x70/0x70
<4>[ 360.882954] [<ffffffff810dbb39>] call_timer_fn+0x39/0xf0
<4>[ 360.882965] [<ffffffff816b3670>] ? dev_deactivate_queue.constprop.34+0x70/0x70
<4>[ 360.882978] [<ffffffff810dd123>] run_timer_softirq+0x173/0x290
<4>[ 360.882991] [<ffffffff810790ad>] __do_softirq+0xfd/0x280
<4>[ 360.883004] [<ffffffff81079402>] irq_exit+0xe2/0xf0
<4>[ 360.883014] [<ffffffff81796a46>] smp_apic_timer_interrupt+0x46/0x60
<4>[ 360.883026] [<ffffffff81794bdb>] apic_timer_interrupt+0x6b/0x70
<4>[ 360.883036] <EOI> [<ffffffff810de40c>] ? hrtimer_start_range_ns+0x1ac/0x3a0
<4>[ 360.883058] [<ffffffff81635864>] ? cpuidle_enter_state+0xf4/0x220
<4>[ 360.883069] [<ffffffff81635840>] ? cpuidle_enter_state+0xd0/0x220
<4>[ 360.883081] [<ffffffff816359c7>] cpuidle_enter+0x17/0x20
<4>[ 360.883094] [<ffffffff810b5412>] call_cpuidle+0x32/0x60
<4>[ 360.883105] [<ffffffff816359a3>] ? cpuidle_select+0x13/0x20
<4>[ 360.883115] [<ffffffff810b5699>] cpu_startup_entry+0x259/0x320
<4>[ 360.883128] [<ffffffff81782fdc>] rest_init+0x7c/0x80
<4>[ 360.883141] [<ffffffff81d61fdb>] start_kernel+0x492/0x49f
<4>[ 360.883152] [<ffffffff81d61120>] ? early_idt_handler_array+0x120/0x120
<4>[ 360.883162] [<ffffffff81d614d7>] x86_64_start_reservations+0x2a/0x2c
<4>[ 360.883173] [<ffffffff81d61614>] x86_64_start_kernel+0x13b/0x14a
<4>[ 360.883181] ---[ end trace 5b06bd27ef60de8c ]---
<6>[ 360.883195] usb 1-3: 4294982504 : Tx timeout(#1), bss_type-num = 0-0
<6>[ 363.062297] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 363.062307] usb 1-3: failed to get signal information
<6>[ 363.062352] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 363.062356] usb 1-3: failed to get signal information
<6>[ 369.063002] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 369.063010] usb 1-3: failed to get signal information
<6>[ 369.063045] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 369.063049] usb 1-3: failed to get signal information
<6>[ 370.886854] usb 1-3: 4294985004 : Tx timeout(#2), bss_type-num = 0-0
<6>[ 375.066955] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 375.066965] usb 1-3: failed to get signal information
<6>[ 375.067009] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 375.067013] usb 1-3: failed to get signal information
<6>[ 380.891109] usb 1-3: 4294987504 : Tx timeout(#3), bss_type-num = 0-0
<6>[ 381.069916] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 381.069926] usb 1-3: failed to get signal information
<6>[ 381.069970] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 381.069974] usb 1-3: failed to get signal information
<6>[ 387.072885] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 387.072894] usb 1-3: failed to get signal information
<6>[ 387.072938] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 387.072943] usb 1-3: failed to get signal information
<6>[ 390.895346] usb 1-3: 4294990004 : Tx timeout(#4), bss_type-num = 0-0
<6>[ 393.070238] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 393.070245] usb 1-3: failed to get signal information
<6>[ 393.070277] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 393.070280] usb 1-3: failed to get signal information
<6>[ 399.077176] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 399.077186] usb 1-3: failed to get signal information
<6>[ 399.077230] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 399.077235] usb 1-3: failed to get signal information
<6>[ 400.899581] usb 1-3: 4294992504 : Tx timeout(#5), bss_type-num = 0-0
<6>[ 405.080123] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 405.080132] usb 1-3: failed to get signal information
<6>[ 405.080172] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 405.080175] usb 1-3: failed to get signal information
<6>[ 410.903836] usb 1-3: 4294995004 : Tx timeout(#6), bss_type-num = 0-0
<6>[ 411.083056] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 411.083065] usb 1-3: failed to get signal information
<6>[ 411.083104] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 411.083108] usb 1-3: failed to get signal information
<6>[ 417.083250] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 417.083255] usb 1-3: failed to get signal information
<6>[ 417.083277] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 417.083279] usb 1-3: failed to get signal information
<6>[ 420.908067] usb 1-3: 4294997504 : Tx timeout(#7), bss_type-num = 0-0
<6>[ 423.088158] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 423.088167] usb 1-3: failed to get signal information
<6>[ 423.088206] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 423.088210] usb 1-3: failed to get signal information
<6>[ 429.088417] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 429.088427] usb 1-3: failed to get signal information
<6>[ 429.088471] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 429.088476] usb 1-3: failed to get signal information
<6>[ 430.912295] usb 1-3: 4295000004 : Tx timeout(#8), bss_type-num = 0-0
<6>[ 435.092366] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 435.092375] usb 1-3: failed to get signal information
<6>[ 435.092414] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 435.092418] usb 1-3: failed to get signal information
<6>[ 440.916557] usb 1-3: 4295002504 : Tx timeout(#9), bss_type-num = 0-0
<6>[ 441.092959] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 441.092966] usb 1-3: failed to get signal information
<6>[ 441.092996] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 441.092999] usb 1-3: failed to get signal information
<6>[ 447.097925] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 447.097934] usb 1-3: failed to get signal information
<6>[ 447.097974] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 447.097978] usb 1-3: failed to get signal information
<6>[ 450.920787] usb 1-3: 4295005004 : Tx timeout(#10), bss_type-num = 0-0
<6>[ 453.100865] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 453.100874] usb 1-3: failed to get signal information
<6>[ 453.100914] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 453.100918] usb 1-3: failed to get signal information
<6>[ 459.102825] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 459.102835] usb 1-3: failed to get signal information
<6>[ 459.102879] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 459.102884] usb 1-3: failed to get signal information
<6>[ 460.925009] usb 1-3: 4295007504 : Tx timeout(#11), bss_type-num = 0-0
<6>[ 465.102699] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 465.102709] usb 1-3: failed to get signal information
<6>[ 465.102822] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 465.102835] usb 1-3: failed to get signal information
<6>[ 470.929266] usb 1-3: 4295010004 : Tx timeout(#12), bss_type-num = 0-0
<6>[ 471.107749] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 471.107759] usb 1-3: failed to get signal information
<6>[ 471.107803] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 471.107807] usb 1-3: failed to get signal information
<6>[ 477.108166] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 477.108174] usb 1-3: failed to get signal information
<6>[ 477.108210] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 477.108213] usb 1-3: failed to get signal information
<6>[ 480.933506] usb 1-3: 4295012504 : Tx timeout(#13), bss_type-num = 0-0
<6>[ 483.113029] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 483.113036] usb 1-3: failed to get signal information
<6>[ 483.113065] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 483.113067] usb 1-3: failed to get signal information
<6>[ 489.113838] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 489.113848] usb 1-3: failed to get signal information
<6>[ 489.113893] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 489.113897] usb 1-3: failed to get signal information
<6>[ 490.937730] usb 1-3: 4295015004 : Tx timeout(#14), bss_type-num = 0-0
<6>[ 495.117807] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 495.117817] usb 1-3: failed to get signal information
<6>[ 495.117861] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 495.117865] usb 1-3: failed to get signal information
<6>[ 500.941981] usb 1-3: 4295017504 : Tx timeout(#15), bss_type-num = 0-0
<6>[ 501.120761] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 501.120771] usb 1-3: failed to get signal information
<6>[ 501.120814] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 501.120818] usb 1-3: failed to get signal information
<6>[ 507.123686] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 507.123694] usb 1-3: failed to get signal information
<6>[ 507.123730] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 507.123733] usb 1-3: failed to get signal information
<6>[ 510.946225] usb 1-3: 4295020004 : Tx timeout(#16), bss_type-num = 0-0
<6>[ 513.125492] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 513.125497] usb 1-3: failed to get signal information
<6>[ 513.125532] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 513.125535] usb 1-3: failed to get signal information
<6>[ 519.128429] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 519.128440] usb 1-3: failed to get signal information
<6>[ 519.128484] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 519.128488] usb 1-3: failed to get signal information
<6>[ 520.950439] usb 1-3: 4295022504 : Tx timeout(#17), bss_type-num = 0-0
<6>[ 525.125664] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 525.125673] usb 1-3: failed to get signal information
<6>[ 525.125717] usb 1-3: PREP_CMD: FW is in bad state
<6>[ 525.125722] usb 1-3: failed to get signal information
next prev parent reply other threads:[~2015-08-05 6:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 13:48 wifi freezing (module mwifiex) Julien Cubizolles
2015-07-27 7:13 ` Amitkumar Karwar
2015-07-27 14:23 ` Julien Cubizolles
2015-08-05 6:30 ` Julien Cubizolles [this message]
2015-08-05 8:40 ` firmware in a bad state " Amitkumar Karwar
2015-08-05 9:12 ` Julien Cubizolles
2015-08-05 9:54 ` Amitkumar Karwar
2015-08-06 6:30 ` Julien Cubizolles
2015-08-06 10:31 ` Amitkumar Karwar
2015-08-07 10:51 ` Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zj26z1pd.fsf_-_@free.fr \
--to=j.cubizolles@free.fr \
--cc=akarwar@marvell.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.