All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Cc: bonbons@linux-vserver.org, stable@vger.kernel.org
Subject: Re: [PATCH] Revert "drm/i915: Preserve VGACNTR bits from	the BIOS"
Date: Thu, 18 Dec 2014 15:49:08 +0200	[thread overview]
Message-ID: <87zjal2hm3.fsf@intel.com> (raw)
In-Reply-To: <1418747917-21349-1-git-send-email-ville.syrjala@linux.intel.com>

On Tue, 16 Dec 2014, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> The VGA_2X_MODE bit apparently affects the display even when the VGA
> plane is disabled. The bit will set by the BIOS when the panel width
> is at least 1280 pixels. So by preserving the bit from the BIOS we
> end up with corrupted display on machines with such high res panels.
> I only have 1024x768 panels on my gen2 machines so never ran into
> this problem.
>
> The original reason for preserving the VGACNTR register was to make
> my 830 survive S3 with acpi_sleep=s3_bios option. However after
> further 830 fixes that option is no longer needed to make S3 work
> and preserving VGACNTR doesn't seem to be necessary without it,
> so we can just revert the entire patch.
>
> This reverts commit 69769f9a422bfc62e17399da3590c5e31ac37f24.
>
> Cc: bonbons67@internet.lu
> Cc: stable@vger.kernel.org
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87171
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Pushed to drm-intel-next-fixes, thanks for the patch.

BR,
Jani.

> ---
>  drivers/gpu/drm/i915/i915_drv.h      | 2 --
>  drivers/gpu/drm/i915/intel_display.c | 8 +-------
>  2 files changed, 1 insertion(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 16a6f6d..fd2d433 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1665,8 +1665,6 @@ struct drm_i915_private {
>  	 */
>  	struct workqueue_struct *dp_wq;
>  
> -	uint32_t bios_vgacntr;
> -
>  	/* Old dri1 support infrastructure, beware the dragons ya fools entering
>  	 * here! */
>  	struct i915_dri1_state dri1;
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 9cb5c95..cadc3bc 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -12933,11 +12933,7 @@ static void i915_disable_vga(struct drm_device *dev)
>  	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
>  	udelay(300);
>  
> -	/*
> -	 * Fujitsu-Siemens Lifebook S6010 (830) has problems resuming
> -	 * from S3 without preserving (some of?) the other bits.
> -	 */
> -	I915_WRITE(vga_reg, dev_priv->bios_vgacntr | VGA_DISP_DISABLE);
> +	I915_WRITE(vga_reg, VGA_DISP_DISABLE);
>  	POSTING_READ(vga_reg);
>  }
>  
> @@ -13026,8 +13022,6 @@ void intel_modeset_init(struct drm_device *dev)
>  
>  	intel_shared_dpll_init(dev);
>  
> -	/* save the BIOS value before clobbering it */
> -	dev_priv->bios_vgacntr = I915_READ(i915_vgacntrl_reg(dev));
>  	/* Just disable it once at startup */
>  	i915_disable_vga(dev);
>  	intel_setup_outputs(dev);
> -- 
> 2.0.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

      parent reply	other threads:[~2014-12-18 13:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-16 16:38 [PATCH] Revert "drm/i915: Preserve VGACNTR bits from the BIOS" ville.syrjala
2014-12-16 16:53 ` Bruno Prémont
2014-12-18 13:49 ` Jani Nikula [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87zjal2hm3.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=bonbons@linux-vserver.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=stable@vger.kernel.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.