From: Madper Xie <cxie@redhat.com>
To: "linux-kernel\@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:491
Date: Tue, 18 Feb 2014 11:02:41 +0800 [thread overview]
Message-ID: <87zjlpcecu.fsf@redhat.com> (raw)
Howdy all,
Meet following warning and call trace:
[307001.720980] ------------[ cut here ]------------
[307001.720994] WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:491 add_dma_entry+0x127/0x130()
[307001.720996] DMA-API: exceeded 7 overlapping mappings of pfn 1932f8
[307001.720998] Modules linked in: ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute ebtable_filter ebtables ip6table_nat nf_conntra
ck_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_na
t_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables cfg80211 bridge stp llc vfat fat x86_pkg_temp_thermal nfsd core
temp kvm_intel kvm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec auth_rpcgss crct10dif_pclmul crc32_pclmul crc32c_
intel snd_hwdep nfs_acl lockd snd_seq ghash_clmulni_intel e1000e aesni_intel snd_seq_device snd_pcm lrw snd_timer sunrpc gf128mul glue_helper hp_wmi ablk_helpe
r snd sparse_keymap
[307001.721056] iTCO_wdt cryptd rfkill iTCO_vendor_support ppdev serio_raw microcode parport_pc parport soundcore lpc_ich wmi ptp i2c_i801 pcspkr pps_core tpm
_infineon mfd_core xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common i915 i2c_algo_bit drm_kms_helper drm ahci libahci libata i2c_core video dm_mir
ror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[307001.721093] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc2+ #14
[307001.721095] Hardware name: Hewlett-Packard HP Compaq Elite 8300 SFF/3397, BIOS K01 v02.05 05/07/2012
[307001.721098] 0000000000000009 ffff880215c03660 ffffffff816b6049 ffff880215c036a8
[307001.721103] ffff880215c03698 ffffffff8107782d 00000000001932f8 ffff880011b030c0
[307001.721108] 0000000000000296 ffffffff82eb1b80 0000000000000296 ffff880215c036f8
[307001.721113] Call Trace:
[307001.721115] <IRQ> [<ffffffff816b6049>] dump_stack+0x4d/0x66
[307001.721129] [<ffffffff8107782d>] warn_slowpath_common+0x7d/0xa0
[307001.721134] [<ffffffff8107789c>] warn_slowpath_fmt+0x4c/0x50
[307001.721138] [<ffffffff81362f5d>] ? active_pfn_read_overlap+0x2d/0x50
[307001.721142] [<ffffffff81363507>] add_dma_entry+0x127/0x130
[307001.721146] [<ffffffff8136384a>] debug_dma_map_page+0x11a/0x140
[307001.721161] [<ffffffffa0554e63>] e1000_xmit_frame+0x723/0xfd0 [e1000e]
[307001.721168] [<ffffffff81579996>] dev_hard_start_xmit+0x2e6/0x8d0
[307001.721174] [<ffffffff8159fdde>] sch_direct_xmit+0xee/0x290
[307001.721178] [<ffffffff8157a1c2>] __dev_queue_xmit+0x242/0x920
[307001.721183] [<ffffffff81579f85>] ? __dev_queue_xmit+0x5/0x920
[307001.721187] [<ffffffff8157a8b0>] dev_queue_xmit+0x10/0x20
[307001.721194] [<ffffffff815c2cf0>] ip_finish_output+0x680/0x930
[307001.721198] [<ffffffff815c472c>] ? ip_output+0x5c/0x100
[307001.721203] [<ffffffff815c472c>] ip_output+0x5c/0x100
[307001.721207] [<ffffffff815c3ac9>] ip_local_out+0x29/0x90
[307001.721212] [<ffffffff815c3f99>] ip_queue_xmit+0x1e9/0x650
[307001.721216] [<ffffffff815c3db5>] ? ip_queue_xmit+0x5/0x650
[307001.721222] [<ffffffff815dce97>] tcp_transmit_skb+0x467/0xa90
[307001.721227] [<ffffffff815dd65e>] tcp_write_xmit+0x19e/0xc10
[307001.721231] [<ffffffff815de33e>] __tcp_push_pending_frames+0x2e/0xc0
[307001.721236] [<ffffffff815d95df>] tcp_rcv_established+0x1df/0x650
[307001.721240] [<ffffffff815e4a85>] tcp_v4_do_rcv+0x195/0x4b0
[307001.721243] [<ffffffff815e73be>] tcp_v4_rcv+0xa9e/0xb90
[307001.721248] [<ffffffff815bd103>] ? ip_local_deliver_finish+0x43/0x460
[307001.721253] [<ffffffff815bd1ff>] ip_local_deliver_finish+0x13f/0x460
[307001.721257] [<ffffffff815bd103>] ? ip_local_deliver_finish+0x43/0x460
[307001.721261] [<ffffffff815bd7b8>] ip_local_deliver+0x48/0x80
[307001.721266] [<ffffffff815bcb10>] ip_rcv_finish+0x160/0x710
[307001.721270] [<ffffffff815bda84>] ip_rcv+0x294/0x3d0
[307001.721275] [<ffffffff81575a32>] __netif_receive_skb_core+0x9f2/0xdb0
[307001.721279] [<ffffffff8157517b>] ? __netif_receive_skb_core+0x13b/0xdb0
[307001.721283] [<ffffffff81575e08>] __netif_receive_skb+0x18/0x60
[307001.721288] [<ffffffff815777b3>] netif_receive_skb_internal+0x33/0x200
[307001.721292] [<ffffffff8157869d>] napi_gro_receive+0x9d/0x1a0
[307001.721302] [<ffffffffa0551adf>] e1000_receive_skb+0x7f/0xe0 [e1000e]
[307001.721311] [<ffffffffa05530f1>] e1000_clean_rx_irq+0x281/0x440 [e1000e]
[307001.721321] [<ffffffffa055b2bd>] e1000e_poll+0x6d/0x310 [e1000e]
[307001.721326] [<ffffffff815789ba>] net_rx_action+0x15a/0x370
[307001.721331] [<ffffffff8107e4b5>] __do_softirq+0x135/0x4d0
[307001.721335] [<ffffffff8107ebfd>] irq_exit+0x12d/0x150
[307001.721339] [<ffffffff816cc018>] do_IRQ+0x58/0xf0
[307001.721346] [<ffffffff816bfff2>] common_interrupt+0x72/0x72
[307001.721347] <EOI> [<ffffffff81523310>] ? cpuidle_enter_state+0x50/0xd0
[307001.721355] [<ffffffff81523317>] ? cpuidle_enter_state+0x57/0xd0
[307001.721359] [<ffffffff81523449>] cpuidle_idle_call+0xb9/0x380
[307001.721366] [<ffffffff810263be>] arch_cpu_idle+0xe/0x40
[307001.721373] [<ffffffff810f06ae>] cpu_startup_entry+0x9e/0x410
[307001.721379] [<ffffffff816a295d>] rest_init+0x13d/0x150
[307001.721383] [<ffffffff816a2825>] ? rest_init+0x5/0x150
[307001.721389] [<ffffffff81d68f68>] start_kernel+0x445/0x450
[307001.721393] [<ffffffff81d6892c>] ? repair_env_string+0x5c/0x5c
[307001.721397] [<ffffffff81d68120>] ? early_idt_handlers+0x120/0x120
[307001.721401] [<ffffffff81d685de>] x86_64_start_reservations+0x2a/0x2c
[307001.721405] [<ffffffff81d6871e>] x86_64_start_kernel+0x13e/0x14d
[307001.721408] ---[ end trace 1f133d9f413c7e07 ]---
--
Sent with my mu4e
next reply other threads:[~2014-02-18 3:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-18 3:02 Madper Xie [this message]
2014-02-18 14:24 ` WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:491 Josh Boyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zjlpcecu.fsf@redhat.com \
--to=cxie@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.