All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Eliminate lots of WARNs when there's no backlight present
Date: Fri, 17 Jan 2014 13:30:59 +0200	[thread overview]
Message-ID: <87zjmu7slo.fsf@intel.com> (raw)
In-Reply-To: <1389889635-27623-1-git-send-email-ville.syrjala@linux.intel.com>

On Thu, 16 Jan 2014, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> My 855gm doesn't register the intel backlight but it still ends up
> calling the backlight code to enable/disable the backlight via the
> LVDS code. This leads to some WARNs due to backlight.max being 0.
>
> Let's have intel_panel_enable_backlight() and intel_panel_disable_backlight()
> check whether there's a backlight present or not.
>
> Also move the backlight.present check from asle_set_backlight() into
> intel_panel_set_backlight() for some extra symmetry.

I have an identical patch in my local repo dated Dec 13... should've
sent it out weeks ago. Damn.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_opregion.c | 10 ++--------
>  drivers/gpu/drm/i915/intel_panel.c    |  6 +++---
>  2 files changed, 5 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
> index 3da259e..37e9a96 100644
> --- a/drivers/gpu/drm/i915/intel_opregion.c
> +++ b/drivers/gpu/drm/i915/intel_opregion.c
> @@ -396,9 +396,7 @@ int intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state)
>  static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> -	struct drm_connector *connector;
>  	struct intel_connector *intel_connector;
> -	struct intel_panel *panel;
>  	struct opregion_asle __iomem *asle = dev_priv->opregion.asle;
>  
>  	DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp);
> @@ -417,12 +415,8 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
>  	 * only one).
>  	 */
>  	DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp);
> -	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
> -		intel_connector = to_intel_connector(connector);
> -		panel = &intel_connector->panel;
> -		if (panel->backlight.present)
> -			intel_panel_set_backlight(intel_connector, bclp, 255);
> -	}
> +	list_for_each_entry(intel_connector, &dev->mode_config.connector_list, base.head)
> +		intel_panel_set_backlight(intel_connector, bclp, 255);
>  	iowrite32(DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID, &asle->cblv);
>  
>  	mutex_unlock(&dev->mode_config.mutex);
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 20ebc3e..350de35 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -502,7 +502,7 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
>  	u32 freq;
>  	unsigned long flags;
>  
> -	if (pipe == INVALID_PIPE)
> +	if (!panel->backlight.present || pipe == INVALID_PIPE)
>  		return;
>  
>  	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
> @@ -579,7 +579,7 @@ void intel_panel_disable_backlight(struct intel_connector *connector)
>  	enum pipe pipe = intel_get_pipe_from_connector(connector);
>  	unsigned long flags;
>  
> -	if (pipe == INVALID_PIPE)
> +	if (!panel->backlight.present || pipe == INVALID_PIPE)
>  		return;
>  
>  	/*
> @@ -782,7 +782,7 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
>  	enum pipe pipe = intel_get_pipe_from_connector(connector);
>  	unsigned long flags;
>  
> -	if (pipe == INVALID_PIPE)
> +	if (!panel->backlight.present || pipe == INVALID_PIPE)
>  		return;
>  
>  	DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
> -- 
> 1.8.3.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2014-01-17 11:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-16 16:27 [PATCH] drm/i915: Eliminate lots of WARNs when there's no backlight present ville.syrjala
2014-01-16 16:55 ` Daniel Vetter
2014-01-16 17:09   ` Ville Syrjälä
2014-01-17 11:30 ` Jani Nikula [this message]
2014-01-17 13:32   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87zjmu7slo.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.