From: Dmitry Monakhov <dmonakhov@openvz.org>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: "linux-ext4\@vger.kernel.org" <linux-ext4@vger.kernel.org>,
"linux-kernel\@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Alan Piszcz <ap@solarrain.com>
Subject: Re: EXT4 is ~2X as slow as XFS (593MB/s vs 304MB/s) for writes?
Date: Sat, 27 Feb 2010 03:46:39 +0300 [thread overview]
Message-ID: <87zl2vsdxs.fsf@openvz.org> (raw)
In-Reply-To: <alpine.DEB.2.00.1002261922010.8247@p34.internal.lan> (Justin Piszcz's message of "Sat, 27 Feb 2010 03:31:02 +0300")
Justin Piszcz <jpiszcz@lucidpixels.com> writes:
> Hello,
>
> Is it possible to 'optimize' ext4 so it is as fast as XFS for writes?
> I see about half the performance as XFS for sequential writes.
>
> I have checked the doc and tried several options, a few of which are shown
> below (I have also tried the commit/journal_async/etc options but none of
> them get the write speeds anywhere near XFS)?
>
> Sure 'dd' is not a real benchmark, etc, etc, but with 10Gbps between 2
> hosts I get 550MiB/s+ on reads from EXT4 but only 100-200MiB/s write.
>
> When it was XFS I used to get 400-600MiB/s for writes for the same RAID
> volume.
>
> How do I 'speed' up ext4? Is it possible?
I don't know how to speedup, but i do know how to slowdown XFS :)
Seems that you forget to call fsync at the end of file write
In this case some data may reside in memory cache.
Please add "conv=fsync" or "conv=fdatasync" to the dd cmd.
And redone your measurements.
>
> raid0_11 disks: (XFS)
> # /dev/md0 /r1 xfs noatime 0 1
> p63:/r1# dd if=/dev/zero of=bigfile1 bs=1M count=10240
> 10240+0 records in
> 10240+0 records out
> 10737418240 bytes (11 GB) copied, 18.1021 s, 593 MB/s
> p63:/r1#
>
> raid0_11 disks: (EXT4)
> # /dev/md0 /r1 ext4 noatime 0 1
> # dd if=/dev/zero of=file bs=1M count=10240
> 10240+0 records in
> 10240+0 records out
> 10737418240 bytes (11 GB) copied, 35.3741 s, 304 MB/s
> p63:/r1#
>
> Other tests (ext4)
> p63:~# mount /dev/md0 /r1 -o data=writeback
> p63:~# cd /r1
> p63:/r1# dd if=/dev/zero of=file bs=1M count=10240
> 10240+0 records in
> 10240+0 records out
> 10737418240 bytes (11 GB) copied, 39.8746 s, 269 MB/s
> p63:/r1#
>
> p63:~# mount /dev/md0 /r1 -o data=writeback,nobarrier
> p63:/r1# dd if=/dev/zero of=file bs=1M count=10240
> 10240+0 records in
> 10240+0 records out
> 10737418240 bytes (11 GB) copied, 40.0656 s, 268 MB/s
>
> Justin.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-02-27 0:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-27 0:31 EXT4 is ~2X as slow as XFS (593MB/s vs 304MB/s) for writes? Justin Piszcz
2010-02-27 0:46 ` Dmitry Monakhov [this message]
2010-02-27 1:05 ` Justin Piszcz
2010-02-27 1:05 ` Justin Piszcz
2010-02-28 0:56 ` Asdo
2010-02-28 9:59 ` Justin Piszcz
2010-02-27 0:51 ` Eric Sandeen
2010-02-27 1:08 ` Justin Piszcz
2010-02-27 1:12 ` Eric Sandeen
2010-02-27 1:28 ` Eric Sandeen
2010-02-27 10:14 ` Justin Piszcz
2010-02-27 10:51 ` Justin Piszcz
2010-02-27 11:09 ` Justin Piszcz
2010-02-27 11:36 ` Justin Piszcz
2010-02-28 5:42 ` tytso
2010-02-28 14:55 ` Justin Piszcz
2010-03-01 8:39 ` Andreas Dilger
2010-03-01 9:21 ` Justin Piszcz
2010-03-01 14:48 ` Michael Tokarev
2010-03-01 15:07 ` Justin Piszcz
2010-03-01 16:15 ` Eric Sandeen
2010-02-28 23:50 ` Dave Chinner
2010-03-02 0:08 ` Eric Sandeen
2010-03-02 0:37 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zl2vsdxs.fsf@openvz.org \
--to=dmonakhov@openvz.org \
--cc=ap@solarrain.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.