From: Jan Stancek <jstancek@redhat.com>
To: "Gary S. Robertson" <gary.robertson@linaro.org>
Cc: ltp-list@lists.sourceforge.net, mike holmes <mike.holmes@linaro.org>
Subject: Re: [LTP] [PATCH] Allow mutex initialization without PI configured
Date: Tue, 29 Jul 2014 04:05:18 -0400 (EDT) [thread overview]
Message-ID: <886732917.16243940.1406621118617.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <1406586824-1692-1-git-send-email-gary.robertson@linaro.org>
----- Original Message -----
> From: "Gary S. Robertson" <gary.robertson@linaro.org>
> To: ltp-list@lists.sourceforge.net
> Cc: "mike holmes" <mike.holmes@linaro.org>
> Sent: Tuesday, 29 July, 2014 12:33:44 AM
> Subject: [LTP] [PATCH] Allow mutex initialization without PI configured
>
> From: "Gary S. Robertson" <gary.robertson@linaro.org>
>
> LTP seems primarily intended to be built and run on the same machine,
> and thus uses autotools / autoconf to determine the features of the host
> machine's environment prior to compilation. However, when distributing
> precompiled binaries, or when building in a cross-compilation environment,
> it is better not to disable features based on the compile-time environment.
Isn't the build going to fail then if you miss those features?
> This patch removes compile-time dependencies on priority-inheriting mutexes
Seems to me, the problem is:
-#if HAVE_DECL_PTHREAD_PRIO_INHERIT
+#if HAS_PRIORITY_INHERIT
I'm not against removing that check entirely. I'm not sure anyone is using
distro so old it's missing it. We also don't check for it in openposix testsuite.
> and allows the code to attempt initialization of PI mutexes even
> if the runtime environment lacks that feature... in which case
> the associated test(s) should fail.
>
> Without this patch, init_pi_mutex() may be compiled as an empty function,
> allowing subsequent operations to be attempted on an un-inititalized mutex.
> Likewise, testpi-3 may fail to initialize a mutex before starting pthreads
> which attempt to use the mutex.
Then it shouldn't run at all and end with TCONF.
>
> Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
> ---
> testcases/realtime/lib/librttest.c | 2 --
> testcases/realtime/stress/pi-tests/testpi-3.c | 2 --
> 2 files changed, 4 deletions(-)
>
> diff --git a/testcases/realtime/lib/librttest.c
> b/testcases/realtime/lib/librttest.c
> index 0dd6019..9f37d08 100644
> --- a/testcases/realtime/lib/librttest.c
> +++ b/testcases/realtime/lib/librttest.c
> @@ -586,7 +586,6 @@ void *busy_work_us(int us)
>
> void init_pi_mutex(pthread_mutex_t * m)
> {
> -#if HAVE_DECL_PTHREAD_PRIO_INHERIT
> pthread_mutexattr_t attr;
> int ret;
> int protocol;
> @@ -609,7 +608,6 @@ void init_pi_mutex(pthread_mutex_t * m)
> if ((ret = pthread_mutex_init(m, &attr)) != 0) {
> printf("Failed to init mutex: %d (%s)\n", ret, strerror(ret));
> }
> -#endif1G
^^ There's extra "1G" here
Regards,
Jan
>
> /* FIXME: does any of this need to be destroyed ? */
> }
> diff --git a/testcases/realtime/stress/pi-tests/testpi-3.c
> b/testcases/realtime/stress/pi-tests/testpi-3.c
> index 30f38f6..807c9cc 100644
> --- a/testcases/realtime/stress/pi-tests/testpi-3.c
> +++ b/testcases/realtime/stress/pi-tests/testpi-3.c
> @@ -365,7 +365,6 @@ int main(int argc, char *argv[])
>
> printf("Start %s\n", argv[0]);
>
> -#if HAVE_DECL_PTHREAD_PRIO_INHERIT
> if (!nopi) {
> pthread_mutexattr_t mutexattr;
> int protocol;
> @@ -386,7 +385,6 @@ int main(int argc, char *argv[])
> printf("Failed to init mutex: %d\n", retc);
> }
> }
> -#endif
>
> startThread(&arg1);
> startThread(&arg2);
> --
> 1.7.9.5
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> Ltp-list mailing list
> Ltp-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ltp-list
>
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2014-07-29 8:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-28 22:33 [LTP] [PATCH] Allow mutex initialization without PI configured Gary S. Robertson
2014-07-29 8:05 ` Jan Stancek [this message]
2014-07-29 10:53 ` chrubis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=886732917.16243940.1406621118617.JavaMail.zimbra@redhat.com \
--to=jstancek@redhat.com \
--cc=gary.robertson@linaro.org \
--cc=ltp-list@lists.sourceforge.net \
--cc=mike.holmes@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.