From: Adrian Hunter <adrian.hunter@intel.com>
To: Rosen Penev <rosenp@gmail.com>, <linux-mmc@vger.kernel.org>
Cc: "Ulf Hansson" <ulfh@kernel.org>,
"open list" <linux-kernel@vger.kernel.org>,
"Karel Balej" <balejk@matfyz.cz>,
"Duje Mihanović" <duje@dujemihanovic.xyz>
Subject: Re: [PATCH] mmc: sdhci-pxav3: use managed clock enablement
Date: Wed, 9 Sep 2026 10:51:18 +0300 [thread overview]
Message-ID: <890a971a-49cc-46e9-83ee-7df6d892f65c@intel.com> (raw)
In-Reply-To: <20260901004243.50052-1-rosenp@gmail.com>
On 01/09/2026 03:42, Rosen Penev wrote:
> Replace devm_clk_get() plus clk_prepare_enable() with the managed
> variants devm_clk_get_enabled() and devm_clk_get_optional_enabled().
> The core clock becomes optional, which removes the IS_ERR() guards
> in runtime suspend/resume and lets devms unwind the clocks, so the
> manual clk_disable_unprepare() calls in the probe error paths and
> remove are dropped.
>
> clk_prepare_enable() and friends are NULL safe, so no need to check if
> the optional clock is present.
>
> Also handle failures of clk_prepare_enable() in runtime resume instead
> of ignoring them: a failed enable would leave controller register
> accesses hitting unclocked hardware. Bail out before resuming the host
> and unwind clk_io when enabling clk_core fails. This also drops the
> now unused pltfm_host variable from remove().
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> drivers/mmc/host/sdhci-pxav3.c | 42 +++++++++++++++-------------------
> 1 file changed, 19 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index d082c4e21aa9..db9dfa92cb57 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -414,19 +414,18 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
> pltfm_host = sdhci_priv(host);
> pxa = sdhci_pltfm_priv(pltfm_host);
>
> - pxa->clk_io = devm_clk_get(dev, "io");
> + pxa->clk_io = devm_clk_get_enabled(dev, "io");
> if (IS_ERR(pxa->clk_io))
> - pxa->clk_io = devm_clk_get(dev, NULL);
> + pxa->clk_io = devm_clk_get_enabled(dev, NULL);
Sashiko has a point about getting the wrong clock:
https://sashiko.dev/#/patchset/20260901004243.50052-1-rosenp%40gmail.com?part=1
> if (IS_ERR(pxa->clk_io)) {
> dev_err(dev, "failed to get io clock\n");
> return PTR_ERR(pxa->clk_io);
> }
> pltfm_host->clk = pxa->clk_io;
> - clk_prepare_enable(pxa->clk_io);
>
> - pxa->clk_core = devm_clk_get(dev, "core");
> - if (!IS_ERR(pxa->clk_core))
> - clk_prepare_enable(pxa->clk_core);
> + pxa->clk_core = devm_clk_get_optional_enabled(dev, "core");
> + if (IS_ERR(pxa->clk_core))
> + return PTR_ERR(pxa->clk_core);
>
> host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
> /* enable 1/8V DDR capable */
> @@ -435,17 +434,17 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
> if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
> ret = armada_38x_quirks(pdev, host);
> if (ret < 0)
> - goto err_mbus_win;
> + return ret;
> ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
> if (ret < 0)
> - goto err_mbus_win;
> + return ret;
> }
>
> match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
> if (match) {
> ret = mmc_of_parse(host->mmc);
> if (ret)
> - goto err_of_parse;
> + return ret;
> sdhci_get_of_property(pdev);
> pdata = pxav3_get_mmc_pdata(dev);
> pdev->dev.platform_data = pdata;
> @@ -500,27 +499,18 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
> err_add_host:
> pm_runtime_disable(&pdev->dev);
> pm_runtime_put_noidle(&pdev->dev);
> -err_of_parse:
> -err_mbus_win:
> - clk_disable_unprepare(pxa->clk_io);
> - clk_disable_unprepare(pxa->clk_core);
> return ret;
> }
>
> static void sdhci_pxav3_remove(struct platform_device *pdev)
> {
> struct sdhci_host *host = platform_get_drvdata(pdev);
> - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> - struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
>
> pm_runtime_get_sync(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
> pm_runtime_put_noidle(&pdev->dev);
>
> sdhci_remove_host(host, 1);
> -
> - clk_disable_unprepare(pxa->clk_io);
> - clk_disable_unprepare(pxa->clk_core);
> }
>
> static int sdhci_pxav3_suspend(struct device *dev)
> @@ -561,8 +551,7 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
> mmc_retune_needed(host->mmc);
>
> clk_disable_unprepare(pxa->clk_io);
> - if (!IS_ERR(pxa->clk_core))
> - clk_disable_unprepare(pxa->clk_core);
> + clk_disable_unprepare(pxa->clk_core);
>
> return 0;
> }
> @@ -572,10 +561,17 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
> struct sdhci_host *host = dev_get_drvdata(dev);
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
> + int ret;
>
> - clk_prepare_enable(pxa->clk_io);
> - if (!IS_ERR(pxa->clk_core))
> - clk_prepare_enable(pxa->clk_core);
> + ret = clk_prepare_enable(pxa->clk_io);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(pxa->clk_core);
> + if (ret) {
> + clk_disable_unprepare(pxa->clk_io);
> + return ret;
> + }
>
> sdhci_runtime_resume_host(host, 0);
> return 0;
next prev parent reply other threads:[~2026-09-09 7:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 0:42 [PATCH] mmc: sdhci-pxav3: use managed clock enablement Rosen Penev
2026-09-09 7:51 ` Adrian Hunter [this message]
2026-09-09 21:39 ` Rosen Penev
-- strict thread matches above, loose matches on Subject: below --
2026-09-15 18:04 Rosen Penev
2026-09-15 18:20 ` Rosen Penev
2026-09-23 17:28 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=890a971a-49cc-46e9-83ee-7df6d892f65c@intel.com \
--to=adrian.hunter@intel.com \
--cc=balejk@matfyz.cz \
--cc=duje@dujemihanovic.xyz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=rosenp@gmail.com \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.