From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position
Date: Fri, 20 Jul 2012 00:03:06 +0200 (CEST) [thread overview]
Message-ID: <895920526.294134.1342735386480.JavaMail.root@advansee.com> (raw)
When storage devices contain files larger than the embedded RAM, it is useful to
be able to read these files by chunks, e.g. for a software update to the
embedded NAND Flash from an external storage device (USB stick, SD card, etc.).
Hence, this patch makes it possible by adding a new FAT API to read files from a
given position.
Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
---
.../fs/fat/fat.c | 90 ++++++++++++++++----
1 file changed, 72 insertions(+), 18 deletions(-)
diff --git u-boot-66714b1.orig/fs/fat/fat.c u-boot-66714b1/fs/fat/fat.c
index 8ac8b85..709a5eb 100644
--- u-boot-66714b1.orig/fs/fat/fat.c
+++ u-boot-66714b1/fs/fat/fat.c
@@ -329,13 +329,16 @@ get_cluster (fsdata *mydata, __u32 clustnum, __u8 *buffer,
}
/*
- * Read at most 'maxsize' bytes from the file associated with 'dentptr'
+ * Read at most 'maxsize' bytes from 'pos' in the file associated with 'dentptr'
* into 'buffer'.
* Return the number of bytes read or -1 on fatal errors.
*/
+__u8 get_contents_vfatname_block[MAX_CLUSTSIZE]
+ __aligned(ARCH_DMA_MINALIGN);
+
static long
-get_contents (fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
- unsigned long maxsize)
+get_contents (fsdata *mydata, dir_entry *dentptr, unsigned long pos,
+ __u8 *buffer, unsigned long maxsize)
{
unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
@@ -345,12 +348,59 @@ get_contents (fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
debug("Filesize: %ld bytes\n", filesize);
- if (maxsize > 0 && filesize > maxsize)
- filesize = maxsize;
+ if (pos >= filesize) {
+ debug("Read position past EOF: %lu\n", pos);
+ return gotsize;
+ }
+
+ if (maxsize > 0 && filesize > pos + maxsize)
+ filesize = pos + maxsize;
debug("%ld bytes\n", filesize);
actsize = bytesperclust;
+
+ /* go to cluster at pos */
+ while (actsize <= pos) {
+ curclust = get_fatent(mydata, curclust);
+ if (CHECK_CLUST(curclust, mydata->fatsize)) {
+ debug("curclust: 0x%x\n", curclust);
+ debug("Invalid FAT entry\n");
+ return gotsize;
+ }
+ actsize += bytesperclust;
+ }
+
+ /* actsize > pos */
+ actsize -= bytesperclust;
+ filesize -= actsize;
+ pos -= actsize;
+
+ /* align to beginning of next cluster if any */
+ if (pos) {
+ actsize = min(filesize, bytesperclust);
+ if (get_cluster(mydata, curclust, get_contents_vfatname_block,
+ (int)actsize) != 0) {
+ printf("Error reading cluster\n");
+ return -1;
+ }
+ filesize -= actsize;
+ actsize -= pos;
+ memcpy(buffer, get_contents_vfatname_block + pos, actsize);
+ gotsize += actsize;
+ if (!filesize)
+ return gotsize;
+ buffer += actsize;
+
+ curclust = get_fatent(mydata, curclust);
+ if (CHECK_CLUST(curclust, mydata->fatsize)) {
+ debug("curclust: 0x%x\n", curclust);
+ debug("Invalid FAT entry\n");
+ return gotsize;
+ }
+ }
+
+ actsize = bytesperclust;
endclust = curclust;
do {
@@ -434,9 +484,6 @@ static int slot2str (dir_slot *slotptr, char *l_name, int *idx)
* into 'retdent'
* Return 0 on success, -1 otherwise.
*/
-__u8 get_vfatname_block[MAX_CLUSTSIZE]
- __aligned(ARCH_DMA_MINALIGN);
-
static int
get_vfatname (fsdata *mydata, int curclust, __u8 *cluster,
dir_entry *retdent, char *l_name)
@@ -475,13 +522,13 @@ get_vfatname (fsdata *mydata, int curclust, __u8 *cluster,
return -1;
}
- if (get_cluster(mydata, curclust, get_vfatname_block,
+ if (get_cluster(mydata, curclust, get_contents_vfatname_block,
mydata->clust_size * mydata->sect_size) != 0) {
debug("Error: reading directory block\n");
return -1;
}
- slotptr2 = (dir_slot *)get_vfatname_block;
+ slotptr2 = (dir_slot *)get_contents_vfatname_block;
while (counter > 0) {
if (((slotptr2->id & ~LAST_LONG_ENTRY_MASK)
& 0xff) != counter)
@@ -492,7 +539,7 @@ get_vfatname (fsdata *mydata, int curclust, __u8 *cluster,
/* Save the real directory entry */
realdent = (dir_entry *)slotptr2;
- while ((__u8 *)slotptr2 > get_vfatname_block) {
+ while ((__u8 *)slotptr2 > get_contents_vfatname_block) {
slotptr2--;
slot2str(slotptr2, l_name, &idx);
}
@@ -771,12 +818,12 @@ exit:
return ret;
}
-__u8 do_fat_read_block[MAX_CLUSTSIZE]
+__u8 do_fat_read_at_block[MAX_CLUSTSIZE]
__aligned(ARCH_DMA_MINALIGN);
long
-do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
- int dols)
+do_fat_read_at (const char *filename, unsigned long pos, void *buffer,
+ unsigned long maxsize, int dols)
{
char fnamecopy[2048];
boot_sector bs;
@@ -890,12 +937,12 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
(mydata->fatsize == 32) ?
(mydata->clust_size) :
PREFETCH_BLOCKS,
- do_fat_read_block) < 0) {
+ do_fat_read_at_block) < 0) {
debug("Error: reading rootdir block\n");
goto exit;
}
- dentptr = (dir_entry *) do_fat_read_block;
+ dentptr = (dir_entry *) do_fat_read_at_block;
}
for (i = 0; i < DIRENTSPERBLOCK; i++) {
@@ -915,7 +962,7 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
get_vfatname(mydata,
root_cluster,
- do_fat_read_block,
+ do_fat_read_at_block,
dentptr, l_name);
if (dols == LS_ROOT) {
@@ -1118,7 +1165,7 @@ rootdir_done:
subname = nextname;
}
- ret = get_contents(mydata, dentptr, buffer, maxsize);
+ ret = get_contents(mydata, dentptr, pos, buffer, maxsize);
debug("Size: %d, got: %ld\n", FAT2CPU32(dentptr->size), ret);
exit:
@@ -1126,6 +1173,13 @@ exit:
return ret;
}
+long
+do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
+ int dols)
+{
+ return do_fat_read_at(filename, 0, buffer, maxsize, dols);
+}
+
int file_fat_detectfs (void)
{
boot_sector bs;
next reply other threads:[~2012-07-19 22:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-19 22:03 Benoît Thébaudeau [this message]
2012-07-19 22:44 ` [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position Mike Frysinger
2012-07-19 23:17 ` Benoît Thébaudeau
2012-07-20 3:02 ` Mike Frysinger
2012-07-20 13:22 ` [U-Boot] [PATCH v2 8/8] " Benoît Thébaudeau
2012-09-02 15:28 ` Wolfgang Denk
2012-09-03 14:17 ` Benoît Thébaudeau
2012-09-14 20:49 ` Tom Rini
2012-09-14 22:03 ` Benoît Thébaudeau
2012-09-14 22:02 ` Tom Rini
2012-09-22 20:32 ` Benoît Thébaudeau
2012-09-18 18:14 ` [U-Boot] [PATCH v3] " Benoît Thébaudeau
2012-09-27 16:20 ` [U-Boot] [U-Boot, " Tom Rini
2012-09-28 11:32 ` Benoît Thébaudeau
2012-09-28 15:34 ` Stephen Warren
2012-09-28 16:17 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=895920526.294134.1342735386480.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.