All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: Minda Chen <minda.chen@starfivetech.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Pawel Laszczak <pawell@cadence.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Peter Chen <peter.chen@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org
Subject: Re: [PATCH v1 2/2] usb: cdns3: cdns3-plat: Add clk and reset init
Date: Thu, 4 May 2023 15:45:06 +0300	[thread overview]
Message-ID: <8bedea06-b68e-0f17-87fc-5d1317f315eb@kernel.org> (raw)
In-Reply-To: <20230502081805.112149-3-minda.chen@starfivetech.com>

Hi,

On 02/05/2023 11:18, Minda Chen wrote:
> Add gereric clk and reset init codes to Cadence USBSS
> controller. The codes has been tested by starfive vf2
> board.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
>  drivers/usb/cdns3/cdns3-plat.c | 52 ++++++++++++++++++++++++++++++++++
>  drivers/usb/cdns3/core.h       |  3 ++
>  2 files changed, 55 insertions(+)
> 
> diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
> index 2bc5d094548b..1820844c74d2 100644
> --- a/drivers/usb/cdns3/cdns3-plat.c
> +++ b/drivers/usb/cdns3/cdns3-plat.c
> @@ -12,11 +12,13 @@
>   *         Roger Quadros <rogerq@ti.com>
>   */
>  
> +#include <linux/clk.h>
>  #include <linux/module.h>
>  #include <linux/irq.h>
>  #include <linux/kernel.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/reset.h>
>  
>  #include "core.h"
>  #include "gadget-export.h"
> @@ -43,6 +45,34 @@ static void set_phy_power_off(struct cdns *cdns)
>  	phy_power_off(cdns->usb2_phy);
>  }
>  
> +static int cdns3_clk_rst_init(struct cdns *cdns)
> +{
> +	int ret;
> +
> +	if (cdns->num_clks) {
> +		ret = clk_bulk_prepare_enable(cdns->num_clks, cdns->clks);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = reset_control_deassert(cdns->resets);
> +	if (ret && cdns->num_clks)
> +		goto err_clk_init;

if (ret)
	goto err_clk_init;

> +
> +	return ret;
> +
> +err_clk_init:
> +	clk_bulk_disable_unprepare(cdns->num_clks, cdns->clks);

if (cdns->num_clks)
	clk_bulk_disable_unprepare(cdns->num_clks, cdns->clks);

This way is more nicer I think.

> +	return ret;
> +}
> +
> +static void cdns3_clk_rst_deinit(struct cdns *cdns)
> +{
> +	reset_control_assert(cdns->resets);
> +	if (cdns->num_clks)
> +		clk_bulk_disable_unprepare(cdns->num_clks, cdns->clks);
> +}
> +
>  /**
>   * cdns3_plat_probe - probe for cdns3 core device
>   * @pdev: Pointer to cdns3 core platform device
> @@ -116,6 +146,16 @@ static int cdns3_plat_probe(struct platform_device *pdev)
>  		cdns->wakeup_irq = 0x0;
>  	}
>  
> +	ret = devm_clk_bulk_get_all(dev, &cdns->clks);
> +	if (ret < 0)
> +		return ret;
> +
> +	cdns->num_clks = ret;
> +
> +	cdns->resets = devm_reset_control_array_get_optional_exclusive(dev);
> +	if (IS_ERR(cdns->resets))
> +		return PTR_ERR(cdns->resets);
> +
>  	cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
>  	if (IS_ERR(cdns->usb2_phy))
>  		return PTR_ERR(cdns->usb2_phy);
> @@ -128,6 +168,10 @@ static int cdns3_plat_probe(struct platform_device *pdev)
>  	if (IS_ERR(cdns->usb3_phy))
>  		return PTR_ERR(cdns->usb3_phy);
>  
> +	ret = cdns3_clk_rst_init(cdns);
> +	if (ret)
> +		return ret;
> +
>  	ret = phy_init(cdns->usb3_phy);
>  	if (ret)
>  		goto err_phy3_init;
> @@ -165,6 +209,7 @@ static int cdns3_plat_probe(struct platform_device *pdev)
>  	phy_exit(cdns->usb3_phy);
>  err_phy3_init:
>  	phy_exit(cdns->usb2_phy);
> +	cdns3_clk_rst_deinit(cdns);
>  
>  	return ret;
>  }
> @@ -187,6 +232,8 @@ static int cdns3_plat_remove(struct platform_device *pdev)
>  	set_phy_power_off(cdns);
>  	phy_exit(cdns->usb2_phy);
>  	phy_exit(cdns->usb3_phy);
> +	cdns3_clk_rst_deinit(cdns);
> +
>  	return 0;
>  }
>  
> @@ -220,6 +267,8 @@ static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
>  
>  	cdns3_set_platform_suspend(cdns->dev, true, wakeup);
>  	set_phy_power_off(cdns);
> +	if (!PMSG_IS_AUTO(msg))
> +		cdns3_clk_rst_deinit(cdns);

If you reset the controller here all state will be lost.
How is it expected to work on system resume?

>  	spin_lock_irqsave(&cdns->lock, flags);
>  	cdns->in_lpm = true;
>  	spin_unlock_irqrestore(&cdns->lock, flags);
> @@ -237,6 +286,9 @@ static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
>  	if (!cdns->in_lpm)
>  		return 0;
>  
> +	if (!PMSG_IS_AUTO(msg))
> +		cdns3_clk_rst_init(cdns);
> +
>  	if (cdns_power_is_lost(cdns)) {
>  		phy_exit(cdns->usb2_phy);
>  		ret = phy_init(cdns->usb2_phy);
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index 2d332a788871..b894768ee485 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -111,6 +111,9 @@ struct cdns {
>  	struct mutex			mutex;
>  	enum usb_dr_mode		dr_mode;
>  	struct usb_role_switch		*role_sw;
> +	struct reset_control *resets;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
>  	bool				in_lpm;
>  	bool				wakeup_pending;
>  	struct cdns3_platform_data	*pdata;

cheers,
-roger

  reply	other threads:[~2023-05-04 12:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-02  8:18 [PATCH v1 0/2] Add clock and reset in cdns3 platform Minda Chen
2023-05-02  8:18 ` [PATCH v1 1/2] dt-binding: cdns,usb3: Add clock and reset Minda Chen
2023-05-02 20:08   ` Krzysztof Kozlowski
2023-05-06  1:36     ` Minda Chen
2023-05-02 20:10   ` Krzysztof Kozlowski
2023-05-06  1:34     ` Minda Chen
2023-05-02  8:18 ` [PATCH v1 2/2] usb: cdns3: cdns3-plat: Add clk and reset init Minda Chen
2023-05-04 12:45   ` Roger Quadros [this message]
2023-05-06  1:50     ` Minda Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8bedea06-b68e-0f17-87fc-5d1317f315eb@kernel.org \
    --to=rogerq@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=minda.chen@starfivetech.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pawell@cadence.com \
    --cc=peter.chen@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.