Re: [PATCH] drivers/char: add timeout for XHCI console cable

[Jan Beulich <jbeulich@suse.com>]

On 08.10.2026 17:05, Marek Marczykowski-Górecki wrote:
> Do not wait indefinitely for XHCI to configure console connection. If
> the cable is not plugged in, timeout after about 1s and continue boot.
> If the cable is plugged in later, the console will be activated then
> (see final part of dbc_ensure_running()). When timeout occurs, print a
> warning message - it will be saved in the console ring buffer, to be
> later retrieved from dom0, or possibly later printed when the cable is
> finally connected. But, do not print the warning when waiting after
> controller reset, as that may have been called from from console
> dbc_putc() and printing here would result in (possibly infinite)
> recursion.
> 
> Try the timeout to be about 1s, which is way above time needed for
> configuring already connected cable. But, since this part runs very
> early in the Xen startup, time is not calibrated yet, and functions like
> NOW() do not work yet. Use raw TSC and estimate needed time to be at
> least 1s on a fast CPU (5GHz), and possibly longer on a slower one. This
> is not very accurate method, but fortunately it doesn't need to be.

A little fragile, but well...

> --- a/xen/drivers/char/xhci-dbc.c
> +++ b/xen/drivers/char/xhci-dbc.c
> @@ -851,9 +851,15 @@ static void dbc_reset_debug_port(struct dbc *dbc)
>      }
>  }
>  
> -static void dbc_enable_dbc(struct dbc *dbc)
> +static bool dbc_enable_dbc(struct dbc *dbc)
>  {
>      struct dbc_reg *reg = dbc->dbc_reg;
> +    s_time_t start;
> +    /*
> +     * Too early for proper time calibration, assume a 5GHz CPU and let it wait
> +     * about 1s, with still reasonable timeout on a slower CPU.
> +     */
> +    unsigned long timeout_ticks = 5UL*1000*1000*1000;

Even if right now we don't use the driver in any 32-bit env, I think we
better wouldn't deliberately break such a possible use. IOW unsigned
long isn't a suitable type to use here.

Also, nit (style): Blanks please around *.

> @@ -870,8 +876,12 @@ static void dbc_enable_dbc(struct dbc *dbc)
>      writel(readl(&reg->portsc) | (1U << DBC_PSC_PED), &reg->portsc);
>      wmb();
>  
> -    while ( (readl(&reg->ctrl) & (1U << DBC_CTRL_DCR)) == 0 )
> +    start = rdtsc_ordered();
> +    while ( (readl(&reg->ctrl) & (1U << DBC_CTRL_DCR)) == 0 &&
> +            rdtsc_ordered() - start < timeout_ticks )

Urgh - now the driver's truly becoming x86-specific. Is there a reason
this cannot be get_cycles()?

Jan