From: miquels@cistron.nl (Miquel van Smoorenburg)
To: linux-kernel@vger.kernel.org
Subject: Re: PROBLEM: DELL PERC/Megaraid RAID driver in Linux 2.2.18pre17 hang
Date: 29 Oct 2000 13:47:37 GMT [thread overview]
Message-ID: <8th9pp$atm$1@enterprise.cistron.net> (raw)
In-Reply-To: <E36790918FA6D411856500508BD3B2CA1A42@eusegotmail1b.eu.intermec.com> <E13pYpR-0005QZ-00@the-village.bc.nu>
In article <E13pYpR-0005QZ-00@the-village.bc.nu>,
Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
>Yep - known problem. AMI have one more pre patch to sort it our Im going back
>to the older driver
I've tried the AMI patch and it appears to work. I'm now running
2.2.18pre18 + fix to ideprobe.c + ami megaraid fix and it looks OK
Here's the patch.
--- linux-2.2.18pre11/drivers/scsi/megaraid.c Fri Sep 29 15:29:31 2000
+++ megaraid/megaraid.c Wed Oct 25 11:40:51 2000
@@ -9,7 +9,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Version : 1b08b
+ * Version : v1.11a
*
* Description: Linux device driver for AMI MegaRAID controller
*
@@ -179,7 +179,9 @@
* I) Version number changed from 1.10c to 1.11
* II) DCMD_WRITE_CONFIG(0x0D) command in the driver changed from
* scatter/gather list mode to direct pointer mode..
- *
+ *
+ * Version 1.11a
+ * Initlization bug fixed
* BUGS:
* Some older 2.1 kernels (eg. 2.1.90) have a bug in pci.c that
* fails to detect the controller as a pci device on the system.
@@ -194,7 +196,7 @@
#define CRLFSTR "\n"
#define IOCTL_CMD_NEW 0x81
-#define MEGARAID_VERSION "v1.11 (Aug 23, 2000)"
+#define MEGARAID_VERSION "v1.11a (Oct 24, 2000)"
#define MEGARAID_IOCTL_VERSION 108
#include <linux/config.h>
@@ -1842,8 +1844,8 @@
while ((pdev = pci_find_device (pciVendor, pciDev, pdev))) {
#ifdef DELL_MODIFICATION
- if (pci_enable_device(pdev))
- continue;
+ if (pci_enable_device(pdev))
+ continue;
#endif
pciBus = pdev->bus->number;
pciDevFun = pdev->devfn;
@@ -1889,7 +1891,11 @@
"megaraid: to protect your data, please upgrade your firmware to version\n"
"megaraid: 3.10 or later, available from the Dell Technical Support web\n"
"megaraid: site at\n"
+#ifdef DELL_MODIFICATION
"http://support.dell.com/us/en/filelib/download/index.asp?fileid=2940\n");
+#else
+ "http://support.dell.com/us/en/filelib/download/index.asp?fileid=2489\n");
+#endif
continue;
}
}
@@ -1914,16 +1920,32 @@
megaIrq = pdev->irq;
#else
- megaBase = pci_resource_start (pdev, 0);
+#ifdef DELL_MODIFICATION
+ megaBase = pci_resource_start (pdev, 0);
+#else
+ megaBase = pdev->resource[0].start;
+#endif
megaIrq = pdev->irq;
#endif
pciIdx++;
- if (flag & BOARD_QUARTZ)
- megaBase = (long) ioremap (megaBase, 128);
- else
- megaBase += 0x10;
+#ifdef DELL_MODIFICATION
+ if (flag & BOARD_QUARTZ)
+ megaBase = (long) ioremap (megaBase, 128);
+ else
+ megaBase += 0x10;
+#else
+ if (flag & BOARD_QUARTZ) {
+
+ megaBase &= PCI_BASE_ADDRESS_MEM_MASK;
+ megaBase = (long) ioremap (megaBase, 128);
+ }
+ else {
+ megaBase &= PCI_BASE_ADDRESS_IO_MASK;
+ megaBase += 0x10;
+ }
+#endif
/* Initialize SCSI Host structure */
host = scsi_register (pHostTmpl, sizeof (mega_host_config));
@@ -2087,8 +2109,7 @@
remove_proc_entry("config", megaCfg->controller_proc_dir_entry);
remove_proc_entry("mailbox", megaCfg->controller_proc_dir_entry);
for (i = 0; i < numCtlrs; i++) {
- char buf[12];
- memset(buf,0,12);
+ char buf[12] ={0};
sprintf(buf,"%d",i);
remove_proc_entry(buf,mega_proc_dir_entry);
}
Mike.
--
People get the operating system they deserve.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-10-29 13:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-10-28 16:15 PROBLEM: DELL PERC/Megaraid RAID driver in Linux 2.2.18pre17 hang s on boot Daniel.Deimert
2000-10-28 16:27 ` PROBLEM: DELL PERC/Megaraid RAID driver in Linux 2.2.18pre17 hang Alan Cox
2000-10-29 13:47 ` Miquel van Smoorenburg [this message]
-- strict thread matches above, loose matches on Subject: below --
2000-10-28 18:50 Matt_Domsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='8th9pp$atm$1@enterprise.cistron.net' \
--to=miquels@cistron.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.