From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Date: Wed, 05 May 2010 02:48:26 +0000 Subject: Re: [lm-sensors] asus_atk0110 Not Activated in lm_sensors-3.1.1-3 Message-Id: <902481.52154.qm@web31811.mail.mud.yahoo.com> List-Id: References: <697978.38728.qm@web31801.mail.mud.yahoo.com> In-Reply-To: <697978.38728.qm@web31801.mail.mud.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Thanks for the advice Jeff... But it didn't work. I updated all the softwa= re, including a new sensors_detect and such and still the exact same result= s as I described. retried various things and no luck at all! Can any one else provide some guidance on this, as to what if anything can = be done to get lm_sensor to work. Thanks in advance for any and all assistance. Regards, Marc --- On Fri, 4/16/10, Jeff Rickman wrote: > From: Jeff Rickman > Subject: Re: [lm-sensors] asus_atk0110 Not Activated in lm_sensors-3.1.1= -3 > To: "Marc" > Date: Friday, April 16, 2010, 8:15 PM >=20 > > Hi... > > > > Runnig Rehat Fedora Core 12 with an Asus k8n-dre > motherboard.=A0 It has a > > NVIDE nFORCE Professional 2200 Chip as well as a > Winbond W83627THF-A super > > i/o chip. The linux kernel is > kernel-2.6.32.11-99.fc12.x86_64.=A0 Using > > lm_sensors-3.1.1-3.fc12.x86_64 > > > > When I run sensors-detect I get the following > > > > Some south bridges, CPUs or memory controllers contain > embedded sensors. > > Do you want to scan for them? This is totally safe. > (YES/no): y > > Silicon Integrated Systems SIS5595...=A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A0No > > VIA VT82C686 Integrated Sensors...=A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 No > > VIA VT8231 Integrated Sensors...=A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 No > > AMD K8 thermal sensors...=A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0=A0=A0Success! > >=A0 =A0=A0=A0(driver `k8temp') > > AMD Family 10h thermal sensors...=A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A0No > > AMD Family 11h thermal sensors...=A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A0No > > Intel Core family thermal sensor...=A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A0No > > Intel Atom thermal sensor...=A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 No > > Intel AMB FB-DIMM thermal sensor...=A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A0No > > VIA C7 thermal sensor...=A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 No > > VIA Nano thermal sensor...=A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 No > > > > Some Super I/O chips contain embedded sensors. We have > to write to > > standard I/O ports to probe them. This is usually > safe. > > Do you want to scan for Super I/O sensors? (YES/no): > > > > Some Super I/O chips contain embedded sensors. We have > to write to > > standard I/O ports to probe them. This is usually > safe. > > Do you want to scan for Super I/O sensors? (YES/no): > y > > Probing for Super-I/O at 0x2e/0x2f > > Trying family `National Semiconductor'...=A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A0No > > Trying family `SMSC'...=A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0=A0=A0No > > Trying family `VIA/Winbond/Nuvoton/Fintek'...=A0 > =A0 =A0 =A0 =A0 =A0 =A0=A0=A0Yes > > Found `Winbond W83627THF/THG Super IO Sensors' > >=A0 =A0=A0=A0(but not activated) > > Probing for Super-I/O at 0x4e/0x4f > > Trying family `National Semiconductor'...=A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A0No > > Trying family `SMSC'...=A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0=A0=A0No > > Trying family `VIA/Winbond/Nuvoton/Fintek'...=A0 > =A0 =A0 =A0 =A0 =A0 =A0=A0=A0No > > Trying family `ITE'...=A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0 =A0 =A0 =A0 =A0 No > > > > Everything else returns a no until... > > > > Next adapter: SMBus nForce2 adapter at 4c40 (i2c-0) > > Do you want to scan it? (YES/no/selectively): > > > > Nothing in the summary about it. > > > > The k8temp works fine.=A0 I get temperatures. > > k8temp-pci-00c3 > > Adapter: PCI adapter > > Core0 Temp:=A0 +35.0=B0C > > Core1 Temp:=A0 +36.0=B0C > > > > k8temp-pci-00cb > > Adapter: PCI adapter > > Core0 Temp:=A0 +36.0=B0C > > Core1 Temp:=A0 +37.0=B0C > > > > But no fan speeds or anything else because when I > attempt to load the > > w83627hf modules I get the following: > > > > FATAL: Error inserting w83627hf > > > (/lib/modules/2.6.32.11-99.fc12.x86_64/kernel/drivers/hwmon/w83627hf.ko): > > No such device > > > > Here is the lsmod > > > > Module=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 Size=A0 Used by > > fuse=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A057189=A0 2 > > hwmon_vid=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A02091=A0 0 > > eeprom=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 4947=A0 0 > > i2c_dev=A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A07529=A0 0 > > sunrpc=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 193819=A0 1 > > cpufreq_ondemand=A0 =A0 =A0 =A0 8793=A0 > 2 > > powernow_k8=A0 =A0 =A0 =A0 =A0 =A0 > 14706=A0 2 > > freq_table=A0 =A0 =A0 =A0 =A0 =A0 > =A0 3947=A0 2 cpufreq_ondemand,powernow_k8 > > ip6t_REJECT=A0 =A0 =A0 =A0 =A0 > =A0=A0=A04222=A0 10 > > nf_conntrack_ipv6=A0 =A0 =A0 18504=A0 7 > > ip6table_filter=A0 =A0 =A0 > =A0=A0=A02791=A0 1 > > ip6_tables=A0 =A0 =A0 =A0 =A0 > =A0=A0=A016760=A0 1 ip6table_filter > > ipv6=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 279463=A0 32 ip6t_REJECT,nf_conntrack_ipv6 > > uinput=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 7228=A0 0 > > amd64_edac_mod=A0 =A0 =A0 > =A0=A0=A015481=A0 0 > > tg3=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A0101698=A0 0 > > i2c_nforce2=A0 =A0 =A0 =A0 =A0 > =A0=A0=A06819=A0 0 > > i2c_core=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A026876=A0 3 eeprom,i2c_dev,i2c_nforce2 > > edac_core=A0 =A0 =A0 =A0 =A0 =A0 > =A0 39581=A0 4 amd64_edac_mod > > edac_mce_amd=A0 =A0 =A0 =A0 =A0 =A0 > 7746=A0 1 amd64_edac_mod > > k8temp=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 3735=A0 0 > > raid1=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 19043=A0 2 > > dm_multipath=A0 =A0 =A0 =A0 > =A0=A0=A014558=A0 0 > > ata_generic=A0 =A0 =A0 =A0 =A0 > =A0=A0=A03467=A0 0 > > pata_acpi=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A03395=A0 0 > > floppy=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A054666=A0 0 > > pata_amd=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A011269=A0 4 > > sata_nv=A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 20834=A0 3 > > > > When I load the w83627ehf I get: > > FATAL: Error inserting w83627ehf > > > (/lib/modules/2.6.32.11-99.fc12.x86_64/kernel/drivers/hwmon/w83627ehf.ko): > > No such device > > > > When I try the w83781d it loads lsmod shows the > following: > > Module=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 Size=A0 Used by > > w83781d=A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 28749=A0 0 > > fuse=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A057189=A0 2 > > hwmon_vid=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A02091=A0 1 w83781d > > eeprom=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 4947=A0 0 > > i2c_dev=A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A07529=A0 0 > > sunrpc=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 193819=A0 1 > > cpufreq_ondemand=A0 =A0 =A0 =A0 8793=A0 > 2 > > powernow_k8=A0 =A0 =A0 =A0 =A0 =A0 > 14706=A0 2 > > freq_table=A0 =A0 =A0 =A0 =A0 =A0 > =A0 3947=A0 2 cpufreq_ondemand,powernow_k8 > > ip6t_REJECT=A0 =A0 =A0 =A0 =A0 > =A0=A0=A04222=A0 10 > > nf_conntrack_ipv6=A0 =A0 =A0 18504=A0 7 > > ip6table_filter=A0 =A0 =A0 > =A0=A0=A02791=A0 1 > > ip6_tables=A0 =A0 =A0 =A0 =A0 > =A0=A0=A016760=A0 1 ip6table_filter > > ipv6=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 279463=A0 32 ip6t_REJECT,nf_conntrack_ipv6 > > uinput=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 7228=A0 0 > > amd64_edac_mod=A0 =A0 =A0 > =A0=A0=A015481=A0 0 > > tg3=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0=A0=A0101698=A0 0 > > i2c_nforce2=A0 =A0 =A0 =A0 =A0 > =A0=A0=A06819=A0 0 > > i2c_core=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A026876=A0 4 > w83781d,eeprom,i2c_dev,i2c_nforce2 > > edac_core=A0 =A0 =A0 =A0 =A0 =A0 > =A0 39581=A0 4 amd64_edac_mod > > edac_mce_amd=A0 =A0 =A0 =A0 =A0 =A0 > 7746=A0 1 amd64_edac_mod > > k8temp=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 3735=A0 0 > > raid1=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 19043=A0 2 > > dm_multipath=A0 =A0 =A0 =A0 > =A0=A0=A014558=A0 0 > > ata_generic=A0 =A0 =A0 =A0 =A0 > =A0=A0=A03467=A0 0 > > pata_acpi=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A03395=A0 0 > > floppy=A0 =A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A054666=A0 0 > > pata_amd=A0 =A0 =A0 =A0 =A0 =A0 > =A0=A0=A011269=A0 4 > > sata_nv=A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 20834=A0 3 > > > > Running sensor-detect again produces original results > and nothing is > > loaded into the /etc/sysconfig/lm_sensors, So starting > lm_sensors gives me > > a warning telling me its not configured. > > > > Same result as directly above when I load the w83791d > drive, hav\ing > > removed the other, including the w83792d, w83793, > w83l785ts, w83l786ng, > > wm831x-hwmon and wm8350-hwmon. The lsmod stays the > same as above except > > that the driver is relplace at the same position with > the new driver. > > > > Tried various combinations and permutations and > nothing. > > > > Any help would appreciated, and apologizes if it has > already been dealt > > with. > > > > Regards and thanks... > > > > > > _______________________________________________ > > lm-sensors mailing list > > lm-sensors@lm-sensors.org > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > >=20 > You may need to update your version of LM_Sensors... >=20 > Here is what I have on my FC12 x86_64 box running > 2.6.32.11-99.fc12.x86_64: >=20 > lm_sensors.x86_64=A0 =A0 =A0 =A0 =A0 =A0 > =A0 =A0 =A0=A0=A03.1.2-1.fc12 > lm_sensors-libs.x86_64=A0 =A0 =A0 =A0 =A0 > =A0 =A0 3.1.2-1.fc12 >=20 > Unfortunately I do not have your SuperIO chip in my > system. >=20 >=20 >=20 >=20 =20 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors