All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hao Ge <hao.ge@linux.dev>
To: Suren Baghdasaryan <surenb@google.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Abhishek Bapat <abhishekbapat@google.com>,
	stable@vger.kernel.org, Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH v3] alloc_tag: fix undetected compressed tag overflow when profiling is disabled
Date: Fri, 7 Aug 2026 13:45:23 +0800	[thread overview]
Message-ID: <9067a389-2e1b-4352-bb88-7a78a3fe6a19@linux.dev> (raw)
In-Reply-To: <CAJuCfpFyTaqLnyi11PtAj-ouJiLcfxZoYDRUUKSZbW3RfDFOUw@mail.gmail.com>

Hi Suren


On 2026/8/7 09:08, Suren Baghdasaryan wrote:
> On Thu, Aug 6, 2026 at 1:36 AM Hao Ge <hao.ge@linux.dev> wrote:
>>
>> Hi Suren
>>
>>
>> On 2026/8/6 01:47, Suren Baghdasaryan wrote:
>>> On Wed, Aug 5, 2026 at 9:55 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>>>>
>>>> On Wed,  5 Aug 2026 17:06:33 +0800 Hao Ge <hao.ge@linux.dev> wrote:
>>>>
>>>>> In reserve_module_tags(), the tag overflow check is gated on
>>>>> mem_alloc_profiling_enabled():
>>>>>
>>>>>       if (mem_alloc_profiling_enabled() && !tags_addressable())
>>>>>
>>>>> If profiling is toggled off at runtime and a module is loaded whose
>>>>> tags exceed the compressed-mode limit, shutdown_mem_profiling() is
>>>>> skipped. vm_module_tags_populate() still maps memory for the tags and
>>>>> the module loads successfully, but the total tag count now exceeds what
>>>>> NR_UNUSED_PAGEFLAG_BITS can address.
>>>>>
>>>>> Once profiling is re-enabled, ref_to_idx() computes each tag's index
>>>>> as its position in the alloc_tag array. update_page_tag_ref() masks
>>>>> it to alloc_tag_ref_mask before storing in page->flags. Indices
>>>>> beyond the mask are truncated and idx_to_ref() resolves them to wrong
>>>>> tags.
>>>>>
>>>>> This silently corrupts /proc/allocinfo: allocated pages get attributed
>>>>> to the wrong call sites, so the statistics it reports are wrong.
>>>>>
>>>>> mem_alloc_profiling_enabled() and mem_profiling_compressed are
>>>>> independent. Once compressed mode is established at boot, it stays
>>>>> active regardless of runtime toggles of mem_profiling.
>>>>>
>>>>> Remove the mem_alloc_profiling_enabled() guard. Also return an error
>>>>> after shutdown_mem_profiling() to skip vm_module_tags_populate(), as
>>>>> the mapped pages would never be reused - shutdown_mem_profiling() sets
>>>>> mem_profiling_support to false, so no future module load enters the
>>>>> codetag path.
>>>>
>>>> Thanks.
>>>>
>>>> AI review points at a cpuple of possible things, one pre-existing:
>>>>           https://sashiko.dev/#/patchset/20260805090633.141001-1-hao.ge@linux.dev
>>>
>>> Yes, pre-existing issue can be handled separately, it's not directly
>>> related to this change.
>>>
>>>>
>>>> "Does this unintentionally result in a denial of service for module
>>>> loading, preventing critical drivers from loading when they otherwise
>>>> could have just disabled profiling and gracefully continued?" sounds
>>>> pretty obscure and I doubt if we care?
>>>
>>> Hmm, I think Hao considered that in his previous version
>>
>> Yes, I did look into this.
>>
>> but now I'm
>>> thinking we might be able to handle this more gracefully and not fail
>>> the module loading. When profiling is disabled
>>> codetag_needs_module_section() returns false here:
>>> https://elixir.bootlin.com/linux/v7.1.5/source/kernel/module/main.c#L2822,
>>> so if we had to disable profiling, we could return NULL instead of
>>> ENOMEM and change the condition here:
>>> https://elixir.bootlin.com/linux/v7.1.5/source/kernel/module/main.c#L2825
>>> to act as if codetag_needs_module_section() was false from the
>>> beginning. IOW code at
>>> https://elixir.bootlin.com/linux/v7.1.5/source/kernel/module/main.c#L2822
>>> becomes:
>>>
>>> if (codetag_needs_module_section(mod, sname, shdr->sh_size) &&
>>>       (dest = codetag_alloc_module_section(mod, sname, shdr->sh_size,
>>>         arch_mod_section_prepend(mod, i), shdr->sh_addralign)) != NULL) {
>>> ...
>>
>> The primary blocker is __layout_sections.
>>
>> https://elixir.bootlin.com/linux/v7.1.5/source/kernel/module/main.c#L1730
>>
>> This is because __layout_sections controls whether we reserve space for
>> the codetag section inside EXECMEM_MODULE_DATA, the same way we handle
>> regular sections.
>>
>> When codetag_needs_module_section() returns true during layout,
>> module_get_offset_and_type() is skipped, so sh_entsize only gets the
>> type bits with offset = 0 - no space is reserved.
>>
>> If we bail out with NULL when compressed tags overflow and add a dest !=
>> NULL check here, we'll end up hitting the later else block.
>>
>> if (codetag_needs_module_section(mod, sname, shdr->sh_size) &&
>>       (dest = codetag_alloc_module_section(mod, sname, shdr->sh_size,
>> arch_mod_section_prepend(mod, i), shdr->sh_addralign)) != NULL) {
>>          ......
>> } else {
>>          enum mod_mem_type type = shdr->sh_entsize  >> SH_ENTSIZE_TYPE_SHIFT;
>>          unsigned long offset = shdr->sh_entsize  & SH_ENTSIZE_OFFSET_MASK;
>>          dest = mod->mem[type].base + offset;
>> }
>>
>> That'll cause the following memcpy to clobber the leading data.
> 
> Ah, ok, now I remember how the areas are reserved there. Yes, my
> suggestion would not work.
> 
>>
>> If we really need to fix this, we can use dest's return value, with a
>> check like:
>> if (codetag_needs_module_section(mod, sname, shdr->sh_size)) {
>>          dest = codetag_alloc_module_section(mod, sname, shdr->sh_size,
>>                  arch_mod_section_prepend(mod, i), shdr->sh_addralign);
>>          if ( dest == sentinel_val )
>>                  continue;
> 
> You can't simply continue here because during the next iteration
> codetag_needs_module_section() will return false (since we called
> shutdown_mem_profiling() and set mem_profiling_support to false) and
> will take the "else" branch you pointed out earlier, which will
> clobber the leading data.
> 

Ah, right.

>>
>> But that would also mean extra work on our end - for instance, we’d need
>> to stop the per-cpu allocations inside codetag_load_module.
>>
>> https://elixir.bootlin.com/linux/v7.1.5/source/kernel/module/main.c#L3571
>>
>> Could there be a simpler solution for this?
> 
> Hmm. What if we return something like -EAGAIN and propagate it up to
> load_module(). load_module() will check for that error and retry
> calling layout_and_allocate() but since now
> mem_profiling_support=false, both layout_sections() and move_module()
> will work as if profiling is disabled. We need to make sure
> codetag_module_replaced() and codetag_load_module() do nothing when
> mem_profiling_support=false but that should be easy. WDYT?
> 

Good point, I'll look into this approach.

Thanks
Best Regards
Hao

>>
>> Thanks
>> Best Regards
>>
>> Hao
>>
>>>
>>> I think this would result in a better handling of this situation: if
>>> we can't fit the tags anymore, we issue a warning, disable profiling
>>> but continue loading the module. Hao, WDYT?
>>
>>
>>
>>
>>
>>

      reply	other threads:[~2026-08-07  5:45 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05  9:06 [PATCH v3] alloc_tag: fix undetected compressed tag overflow when profiling is disabled Hao Ge
2026-08-05 14:48 ` Suren Baghdasaryan
2026-08-05 16:55 ` Andrew Morton
2026-08-05 17:47   ` Suren Baghdasaryan
2026-08-06  8:35     ` Hao Ge
2026-08-07  1:08       ` Suren Baghdasaryan
2026-08-07  5:45         ` Hao Ge [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9067a389-2e1b-4352-bb88-7a78a3fe6a19@linux.dev \
    --to=hao.ge@linux.dev \
    --cc=abhishekbapat@google.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=stable@vger.kernel.org \
    --cc=surenb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.