Re: problems with mpt fusion driver since 2.6.12-rc3 (amd64 ?)

["Martin J. Bligh" <mbligh@mbligh.org>]

--On Tuesday, May 17, 2005 16:07:14 -0700 "Martin J. Bligh" <mbligh@mbligh.org> wrote:

> I get this on boot since -rc3 ... -rc2 worked fine.
> Is on a 4-way Newisys amd64 box.
> 
> Is this a known bug, or something new?
> 
> ^M^@Fusion MPT base driver 3.01.20
> ^M^@Copyright (c) 1999-2004 LSI Logic Corporation
> ^M^@ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27
> ^M^@mptbase: Initiating ioc0 bringup
> ^M^@mptbase: ioc0: ERROR - Wait IOC_READY state timeout(15)!
> ^M^@mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h)
> ^M^@mptbase: ioc0 NOT READY WARNING!
> ^M^@mptbase: WARNING - ioc0 did not initialize properly! (-1)
> ^M^@mptbase: probe of 0000:02:04.0 failed with error -1
> ^M^@Fusion MPT SCSI Host driver 3.01.20

I get strange errors on -rc4-mm2 as well ... and every kernel
since -rc2-mm2 ... though they all fail in different ways.

^M^@tg3.c:v3.27 (May 5, 2005)
^M^@ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25
^M^@tg3: (0000:02:02.0) phy probe failed, err -16
^M^@BUG: soft lockup detected on CPU#3!
^M
^M^@Modules linked in:
^M^@Pid: 42, comm: swapper Not tainted 2.6.12-rc4-mm2-autokern1
^M^@RIP: 0010:[<ffffffff8037c42b>] <ffffffff8037c42b>{lock_kernel+27}
^M^@RSP: 0000:ffff8101ff401ec0  EFLAGS: 00000286
^M^@RAX: ffff8101ffb37070 RBX: 0000000000000000 RCX: 0000000000000010
^M^@RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
^M^@RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8101ffbad940
^M^@R10: 0000000000000001 R11: ffffffff80258560 R12: 0000000000000000
^M^@R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
^M^@FS:  0000000000000000(0000) GS:ffffffff804cf9c0(0000) knlGS:0000000000000000
^M^@CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
^M^@CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0
^M
^M^@Call Trace:<ffffffff802af516>{serio_thread+22} <ffffffff8012bdc0>{schedule_t
ail+64}
^M^@       <ffffffff8010e47b>{child_rip+8} <ffffffff80258560>{vgacon_cursor+0}
^M^@       <ffffffff802af500>{serio_thread+0} <ffffffff8010e473>{child_rip+0}
^M^@       
^M^@tg3: Problem fetching invariants of chip, aborting.
^M^@tg3: probe of 0000:02:02.0 failed with error -16
^M^@ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 26 (level, low) -> IRQ 26
^M^@tg3: (0000:02:03.0) phy probe failed, err -16
^M^@tg3: Problem fetching invariants of chip, aborting.
^M^@tg3: probe of 0000:02:03.0 failed with error -16