[PATCH V2 05/10] USB: OHCI: Properly handle ohci-exynos suspend

[tomasz.figa@gmail.com (Tomasz Figa)]

Hi Manjunath,

On Thursday 13 of June 2013 14:46:24 Manjunath Goudar wrote:
> Suspend scenario in case of ohci-exynos glue was not
> properly handled as it was not suspending generic part
> of ohci controller.Calling explicitly the ohci_suspend()
> routine in exynos_ohci_suspend() will ensure proper
> handling of suspend scenario.
> 
> V2:
>  -Incase ohci_suspend() fails, return right away without
>   executing further.
> 
> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: Greg KH <greg@kroah.com>
> Cc: linux-usb at vger.kernel.org
> ---
>  drivers/usb/host/ohci-exynos.c |    8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-exynos.c
> b/drivers/usb/host/ohci-exynos.c index 6ff830c..8fecb6a 100644
> --- a/drivers/usb/host/ohci-exynos.c
> +++ b/drivers/usb/host/ohci-exynos.c
> @@ -203,9 +203,17 @@ static int exynos_ohci_suspend(struct device *dev)
>  	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
>  	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
>  	struct platform_device *pdev = to_platform_device(dev);
> +	bool do_wakeup = device_may_wakeup(dev);
>  	unsigned long flags;
>  	int rc = 0;
> 
> +	rc = ohci_suspend(hcd, do_wakeup);
> +	if (rc == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
> +		ohci_resume(hcd, false);
> +		rc = -EBUSY;
> +	}

I'm not into USB host subsystem, so I might just ask a stupid question.

Can't we make ohci_suspend check this for us, so the drivers would just 
check for error code? It seems like in all your patches this part of code 
is duplicated, looking as a good candidate to be generic.

Best regards,
Tomasz

> +	if (rc)
> +		return rc;
>  	/*
>  	 * Root hub was already suspended. Disable irq emission and
>  	 * mark HW unaccessible, bail out if RH has been resumed. Use