Re: Re: [Xenomai-help] Howto catch SEGV signals in Xenomai

["M. Koehrer" <mathias_koehrer@domain.hid>]

Hi Philippe,

thanks for your mail.
I retried everything with all the files that are in the official Xenomai 2.3.0 tar.bz2 file.
I.e. I used kernel 2.6.19.2 and the adeos-ipipe-2.6.19-i386-1.6-03.patch that is in this version.
The same result.
It is a SMP kernel on a Dual Core Pentium. I use a isolcpus=1 kernel command line.

I am about to try the latest svn version of Xenomai and a 2.6.20.2 kernel.

I will let you know when I have found out more...

Regards

Mathias
> 
> This would be the the sign that a problem exists at the I-pipe level
> with your current patch. The fault should have been propagated form
> primary to secondary domain, and obviously it's not.
> 
> > 
> > How can I catch a signal in a Xenomai real time task?
> > 
> 
> There is no difference with any regular Linux application.
> 
> > I am running Xenomai 2.3.0 + NOCOW patch.
> > I have enclosed the .c file and a Makefile in a .tgz file.
> 
> Can't reproduce the issue with 1.7-03 here.
> Please make sure to use a recent and official I-pipe patch if it's not
> already the case, and not a testing patch as published on this list, so
> that we don't start chasing wild gooses.
> http://download.gna.org/adeos/patches/v2.6/
> 


-- 
Mathias Koehrer
mathias_koehrer@domain.hid


Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren
ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT JETZT bei Arcor: günstig
und schnell mit DSL - das All-Inclusive-Paket für clevere Doppel-Sparer,
nur  39,85 €  inkl. DSL- und ISDN-Grundgebühr!
http://www.arcor.de/rd/emf-dsl-2