All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konstantinos Margaritis <kmargar@cc.uoa.gr>
To: linuxppc-dev@lists.linuxppc.org
Cc: debian-powerpc@lists.debian.org
Subject: xserver-fbdev 3.3.3.1 error
Date: Tue, 4 May 1999 20:01:42 +0300	[thread overview]
Message-ID: <99050420073900.08450@proton> (raw)


-----BEGIN PGP SIGNED MESSAGE-----


Well I seem to have a problem with my xserver. Other people don't seem to
have such a problem, however. So it's either my setup or the fbdev driver
(valkyrie). Here is the output of startx with the 3.3.3.1-2 xserver (I am
using a debian glibc 2.1 distribution). The window manager is kwm (kde)
but I am experiencing similar problems with enlightnement, windowmaker,
icewm, etc. although not directly at startup.Any ideas are welcome.Many
other programs are showing this behaviour even if I manage to boot up
a window manager. The strange thing is that I CAN use xserver 3.3.2.3
without any problems, apart from the MIT-SHM extension is for some reason
missing on this one, plus it is kind of buggy.


XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5 ppc [ELF] 
Configured drivers:
   FBDev: Server for frame buffer device
   (Patchlevel 10): mfb, afb, cfb8, cfb16, cfb32
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) Mouse: type: BusMouse, device: /dev/mouse, buttons: 3
(**) FBDev: Graphics device ID: "Linux/m68k Frame Buffer Device"
(**) FBDev: Monitor ID: "Generic Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) FBDev: Using default frame buffer video mode
(--) FBDev: Frame buffer device: valkyrie
(--) FBDev: Video memory: 768K @ 0xf1001000
(--) FBDev: MMIO regs: 0K @ 0xf130a000
(--) FBDev: Type 0 type_aux 0 bits_per_pixel 8
(--) FBDev: Hardware accelerator: None
(--) FBDev: No driver support for hardware acceleration
(--) FBDev: Using cfb8 driver
kwm: X_PutImage(0x1c00011): BadLength (poly request too large or internal Xlib length error)
kwm: failure during initialisation; aborting

waiting for X server to shut down kaudioserver: Captured signal 1.
kaudioserver: disconnectChild() with pid 8240
            Return = 0
kaudioserver: Captured signal 17.
kaudioserver: disconnectChild() with pid 8240
            Return = 0
kaudioserver: Exiting on myExit(1).
Starting audio server with talk id 2696.




- --
Konstantinos Margaritis

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
Charset: noconv

iQCVAwUBNy8pX/alfJok8qABAQFHRAP9FObn4v7z8ACw66MXMYDl+qgi8P7wp0mA
FPgIa8YJHKzM68qLN1zJyWcwb2Jjlj0eHoZ+BNG8kLHF/oU+UyPlENnbDpMxBtUc
ff3X9LhKPVt+9Q3j7Z9deP5YvGQDV2QoBwfIS9Rt3XC49V268tr57Sr8kVhigc1D
WJa2m4cY3gY=
=tJam
-----END PGP SIGNATURE-----

[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

                 reply	other threads:[~1999-05-04 17:01 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=99050420073900.08450@proton \
    --to=kmargar@cc.uoa.gr \
    --cc=debian-powerpc@lists.debian.org \
    --cc=linuxppc-dev@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.