From: Marco Reichwald <marcoppc@gmx.net>
To: linuxppc-dev@lists.linuxppc.org
Subject: mol hangs at startup
Date: Wed, 27 Oct 1999 20:40:35 -0400 [thread overview]
Message-ID: <99102720415501.00801@marco> (raw)
I tried to run MoL on my beige G3 without luck. (I'm using an unpatched generic
2.2.13 Kernel)
I don't no much about asm but when I use the debugger, mol seems
to be caught in a endless-loop between adress 0x0 and the "Trap_700_Program"
(whatever this is)
I get no error messages and no video output, it just hangs.
I tried to disable everything and boot from an "Disk Tools" floppy image. Same
problem.
Any ideas?
Mac-on-Linux 0.9.22
(C) 1997-1999 Samuel Rydh, <samuel@ibrium.se>
Using resource file '/etc/molrc'
in_security_mode 0
MOL kernel module 1.1.22
OF Device tree copied from kernel
Loading OF device tree from 'oftrees/oftree.8500'
32MB RAM mapped at 0x20000000
4096K ROM mapped at 0x4fc00000 from 'rom/rom.g3'
ROM checksum = 0x134
Running in PowerPC 604 mode
DEC frequency: 0x00fee5e8 (16 MHx), 167:10 mticks/usec
Running on VT 8.
Using console mouse driver
Initing PCI bus services
PCI-bridge 'bandit' (bus 0..0) installed at 0xf2000000
PCI-bridge 'chaos' (bus 1..1) installed at 0xf0000000
GC, Grand Central, (0:16) found
Descriptor based DMA services inited
Using nvram-image 'nvram/nvram.8500.image'
Floppy image 'images/floppy' used for drive A.
Swim3 floppy driver installed
AWACS disabled
Hammerhead driver installed
Control driver disabled (no pci entry added)
osi_enet: *** OSI ENET DISABLED**
53c94 SCSI-driver installed (IRQs 12/0)
Could not register MESH SCSI unit. Need a second bus ??
SCSI-Disk (hw-0): 0 MB
driver_mgr_list: hacks console pci gc pic dbdma via-cuda adb nvram escc swim3 hammerhead mol_video scsi
Starting emulation...
here it hangs
------------------------------------------------
hooray for captain spalding!
-------------------------------------------------------
--
------------------------------------------------
hooray for captain spalding!
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
reply other threads:[~1999-10-28 0:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99102720415501.00801@marco \
--to=marcoppc@gmx.net \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.