From: Clement Leger <clement.leger@linux.dev>
To: Prabhakar <prabhakar.csengg@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Simon Horman <horms@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Ralph Siemsen <ralph.siemsen@linaro.org>,
linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org,
Prabhakar <prabhakar.csengg+renesas@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH net-next v5 20/24] net: dsa: rzn1-a5psw: Get lookup table size from OF data
Date: Fri, 20 Nov 2026 10:44:15 +0100 [thread overview]
Message-ID: <99974c5f-c1c0-427c-ab10-a6559789f258@linux.dev> (raw)
In-Reply-To: <20261120002549.1908299-21-prabhakar.mahadev-lad.rj@bp.renesas.com>
On 11/20/26 01:25, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> The RZ/N1 A5PSW has 8192 lookup table entries, whereas the RZ/T2H
> and RZ/N2H ETHSW have only 4096 entries.
>
> Add the lookup table size to struct a5psw_of_data, derive the address
> mask from it and use it in the FDB and ageing code.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v4->v5:
> - New patch
> ---
> drivers/net/dsa/rzn1_a5psw.c | 10 ++++++----
> drivers/net/dsa/rzn1_a5psw.h | 4 ++--
> 2 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
> index 7e9bc252d92a..c0c1f45852da 100644
> --- a/drivers/net/dsa/rzn1_a5psw.c
> +++ b/drivers/net/dsa/rzn1_a5psw.c
> @@ -311,18 +311,19 @@ static void a5psw_phylink_mac_link_up(struct phylink_config *config,
> static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
> {
> struct a5psw *a5psw = ds->priv;
> + unsigned int entries = a5psw->of_data->lk_table_entries;
> unsigned long rate;
> u64 max, tmp;
> u32 agetime;
>
> rate = clk_get_rate(a5psw->clk);
> - max = div64_ul(((u64)A5PSW_LK_AGETIME_MASK * A5PSW_TABLE_ENTRIES * 1024),
> + max = div64_ul(((u64)A5PSW_LK_AGETIME_MASK * entries * 1024),
> rate) * 1000;
> if (msecs > max)
> return -EINVAL;
>
> tmp = div_u64(rate, MSEC_PER_SEC);
> - agetime = div_u64(msecs * tmp, 1024 * A5PSW_TABLE_ENTRIES);
> + agetime = div_u64(msecs * tmp, 1024 * entries);
>
> a5psw_reg_writel(a5psw, A5PSW_LK_AGETIME, agetime);
>
> @@ -511,7 +512,7 @@ static int a5psw_lk_execute_lookup(struct a5psw *a5psw, union lk_data *lk_data,
> if (ret)
> return ret;
>
> - *entry = ctrl & A5PSW_LK_ADDR_CTRL_ADDRESS;
> + *entry = ctrl & (a5psw->of_data->lk_table_entries - 1);
>
> return 0;
> }
> @@ -638,7 +639,7 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
>
> mutex_lock(&a5psw->lk_lock);
>
> - for (i = 0; i < A5PSW_TABLE_ENTRIES; i++) {
> + for (i = 0; i < a5psw->of_data->lk_table_entries; i++) {
> reg = A5PSW_LK_ADDR_CTRL_READ | A5PSW_LK_ADDR_CTRL_WAIT | i;
>
> ret = a5psw_lk_execute_ctrl(a5psw, ®);
> @@ -1357,6 +1358,7 @@ static const struct a5psw_of_data rzn1_of_data = {
> .pattern_ctrl_base = 0x3eb0,
> .vlan_res_vlanid = GENMASK(16, 5),
> .vlan_res_portmask = GENMASK(4, 0),
> + .lk_table_entries = 8192,
> };
>
> static const struct of_device_id a5psw_of_mtable[] = {
> diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
> index 29d205e2331d..fd523fe7bf47 100644
> --- a/drivers/net/dsa/rzn1_a5psw.h
> +++ b/drivers/net/dsa/rzn1_a5psw.h
> @@ -93,7 +93,6 @@
> #define A5PSW_LK_ADDR_CTRL_WAIT BIT(27)
> #define A5PSW_LK_ADDR_CTRL_READ BIT(26)
> #define A5PSW_LK_ADDR_CTRL_WRITE BIT(25)
> -#define A5PSW_LK_ADDR_CTRL_ADDRESS GENMASK(12, 0)
>
> #define A5PSW_LK_DATA_LO 0x40C
> #define A5PSW_LK_DATA_HI 0x410
> @@ -210,7 +209,6 @@
>
> #define A5PSW_LK_BUSY_USEC_POLL 10
> #define A5PSW_CTRL_TIMEOUT 1000
> -#define A5PSW_TABLE_ENTRIES 8192
>
> struct fdb_entry {
> u8 mac[ETH_ALEN];
> @@ -241,6 +239,7 @@ union lk_data {
> * @pattern_ctrl_base: Offset of the PATTERN_CTRL register of pattern 0
> * @vlan_res_vlanid: VLANID field mask of the VLAN_RES registers
> * @vlan_res_portmask: PORTMASK field mask of the VLAN_RES registers
> + * @lk_table_entries: Number of entries in the lookup table (power of 2)
> */
> struct a5psw_of_data {
> unsigned int nports;
> @@ -252,6 +251,7 @@ struct a5psw_of_data {
> u16 pattern_ctrl_base;
> u32 vlan_res_vlanid;
> u32 vlan_res_portmask;
> + unsigned int lk_table_entries;
> };
>
> /**
Hi Prabhakar,
It would probably be better to fold all these commits that adds data
into bits of data in oa5psw_of_data into two commits: a first one that
prepares support for RZ/N2 and then a second one that add RZ/N2 support
itself. I'm not the net maintainer but your series is already quite
large just for this change so folding the commits make sense rather than
commitmaxxing.
Thanks,
Clément
next prev parent reply other threads:[~2026-11-20 9:44 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 0:25 [PATCH net-next v5 00/24] Add ETHSW support for Renesas RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 01/24] net: dsa: tag_rzn1_a5psw: Drop redundant ETH_P_DSA_A5PSW definition Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 02/24] net: dsa: tag_rzn1_a5psw: Add RZ/T2H ETHSW tag protocol support Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 03/24] net: dsa: Kconfig: Expand config description to cover RZ/T2H and RZ/N2H ETHSW Prabhakar
2026-11-20 9:32 ` Clement Leger
2026-11-20 18:31 ` Lad, Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 04/24] net: pcs: rzn1-miic: Select ETHSW port speed through SWCTRL Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 05/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Reject the "ports" node Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 06/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Limit port reg values Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 07/24] dt-bindings: net: dsa: renesas,rzn1-a5psw: Add RZ/T2H and RZ/N2H ETHSW support Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 08/24] net: dsa: rzn1-a5psw: Fix LK_LEARNCOUNT write mode encoding Prabhakar
2026-11-20 3:27 ` Andrew Lunn
2026-11-20 6:01 ` Clement Leger
2026-11-20 18:29 ` Lad, Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 09/24] net: dsa: rzn1-a5psw: Fix VLANTransmitted counter offset Prabhakar
2026-11-20 3:29 ` Andrew Lunn
2026-11-20 18:28 ` Lad, Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 10/24] net: dsa: rzn1-a5psw: Fix MDIO clock divider calculation Prabhakar
2026-11-20 6:51 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 11/24] net: dsa: rzn1-a5psw: Set driver data in probe Prabhakar
2026-11-20 6:53 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 12/24] net: dsa: rzn1-a5psw: Add support for optional reset control Prabhakar
2026-11-20 3:32 ` Andrew Lunn
2026-11-20 0:25 ` [PATCH net-next v5 13/24] net: dsa: rzn1-a5psw: Add support for optional timestamp clock Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 14/24] net: dsa: rzn1-a5psw: Make use dev_err_probe() Prabhakar
2026-11-20 6:58 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 15/24] net: dsa: rzn1-a5psw: Get switch info via OF data Prabhakar
2026-11-20 7:02 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 16/24] net: dsa: rzn1-a5psw: Choose tagging protocol based on compatible string Prabhakar
2026-11-20 7:03 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 17/24] net: dsa: rzn1-a5psw: Add fixed frame length workaround for management port Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 18/24] net: dsa: rzn1-a5psw: Get pattern matcher register offsets from OF data Prabhakar
2026-11-20 9:35 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 19/24] net: dsa: rzn1-a5psw: Get VLAN_RES field layout " Prabhakar
2026-11-20 9:37 ` Clement Leger
2026-11-20 0:25 ` [PATCH net-next v5 20/24] net: dsa: rzn1-a5psw: Get lookup table size " Prabhakar
2026-11-20 9:44 ` Clement Leger [this message]
2026-11-20 18:34 ` Lad, Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 21/24] net: dsa: rzn1-a5psw: Update CPU port comment for RZ/T2H Prabhakar
2026-11-20 9:45 ` Clement Leger
2026-11-20 18:35 ` Lad, Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 22/24] net: dsa: rzn1-a5psw: Keep MAC TX enabled on RZ/T2H Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 23/24] net: dsa: rzn1-a5psw: Add support for RZ/T2H Ethernet switch Prabhakar
2026-11-20 0:25 ` [PATCH net-next v5 24/24] net: dsa: Kconfig: Enable support for RZ/T2H and RZ/N2H SoCs Prabhakar
2026-11-20 0:28 ` [PATCH net-next v5 00/24] Add ETHSW support for Renesas " netdev-bot+sinfo
2026-11-20 14:43 ` Lad, Prabhakar
2026-11-20 3:14 ` Jakub Kicinski
2026-11-20 14:44 ` Lad, Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99974c5f-c1c0-427c-ab10-a6559789f258@linux.dev \
--to=clement.leger@linux.dev \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=prabhakar.csengg+renesas@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=ralph.siemsen@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.