Re: [PATCH v2 0/5] arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1

[Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>]

On 10/23/24 12:17, Ivaylo Ivanov wrote:
> Hey folks,
>
> This patchset adds device tree nodes for multiple clock management unit
> blocks, MCT, SPI and UART for Exynos8895.
>
> Exynos8895 uses USIv1 for most of its serial buses, except a few that
> have been implemented in this series. Support for USIv1 and HSI2C will
> be added in the future.
>
> This patchset is dependent on [1] and [2], which add driver support for
> CMU and UART.
>
> [1] https://lore.kernel.org/all/20241023090136.537395-1-ivo.ivanov.ivanov1@gmail.com/
> [2] https://lore.kernel.org/all/20241023090902.538040-1-ivo.ivanov.ivanov1@gmail.com/
>
> Changes in v2:
>  - Add r-b from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>  - Change clock-names according to the v2 changes for clk bindings

Forgot to mention that I dropped the SPI patch due to it getting applied.

Best regards, Ivo.

>
> Ivaylo Ivanov (5):
>   dt-bindings: timer: exynos4210-mct: Add samsung,exynos8895-mct
>     compatible
>   arm64: dts: exynos8895: Add clock management unit nodes
>   arm64: dts: exynos8895: Add Multi Core Timer (MCT) node
>   arm64: dts: exynos8895: Add serial_0/1 nodes
>   arm64: dts: exynos8895: Add spi_0/1 nodes
>
>  .../timer/samsung,exynos4210-mct.yaml         |   2 +
>  arch/arm64/boot/dts/exynos/exynos8895.dtsi    | 161 ++++++++++++++++++
>  2 files changed, 163 insertions(+)
>