Re: Acer Aspire 5 A517-52G - No firmware ACIP and no boot

[Jan Beulich <jbeulich@suse.com>]

On 03.08.2022 08:25, Jan Beulich wrote:
> On 02.08.2022 18:07, Bruno wrote:
>> On initramfs:
>>
>> - xl will give me not found - I cannot do xl info or xl dmesg
> 
> As expected - you'd have to handcraft xl and ints libraries into the
> image.
> 
>> - I cannot mount any disk, therefore, exporting logs from there has been 
>> photographing and using OCR then reviewing and correcting - but I guess 
>> the main difference is ACIP, as I cannot access the disks
> 
> Oh, I see. I was kind of expecting (hoping) you might be able to
> export the logs via, say, a USB key.
> 
>> I have now booted on kernel 18 to get the kernel boot log for you (the 
>> one on Xen-user is kernel 10).
> 
> At the first glance - similar ACPI errors, and a similar issue with
> loading sound firmware. Using two different kernels won't really
> lend itself for direct comparison, though. At the moment I don't see
> a good way forward here as long as not even proper logs can be
> obtained: It may be necessary to add debugging code, the output of
> which would also need collecting. But maybe someone else sees a
> viable route to help you ...

Oh, actually upon looking again I spotted something:

nvme nvme0: pci function 10000:e1:00.0

Note the wider-than-16-bits segment number. Which, afaict, is an effect of
using the Volume Management Device:

vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0

You may want to go through firmware setup options to see whether there's a
way to disable it / its use. Neither Xen nor the Dom0 Linux kernel (i.e.
when run under Xen) have been enabled so far to make this work (and, from
inspection quite a while back, the kernel implementation, during its design,
not having considered the possibility of running on a type-1 hypervisor will
likely make adding support, well, interesting).

Jan