From: Jon Smirl <jonsmirl@gmail.com>
To: jschopp@austin.ibm.com
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] matroxfb compile error
Date: Wed, 16 Mar 2005 18:17:21 -0500 [thread overview]
Message-ID: <9e4733910503161517735bc631@mail.gmail.com> (raw)
In-Reply-To: <42371945.1030606@austin.ibm.com>
It is already fixed the patch just hasn't made it in yet.
--
Jon Smirl
jonsmirl@gmail.com
Fix link error for PPC-based drivers that also use functions in macmodes.c.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
---
Kconfig | 16 ++++++++++++++++
Makefile | 9 +++++----
macmodes.c | 9 ++++++---
3 files changed, 27 insertions(+), 7 deletions(-)
diff -Nru a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig 2005-03-05 07:56:36 +08:00
+++ b/drivers/video/Kconfig 2005-03-14 06:50:28 +08:00
@@ -74,6 +74,11 @@
This is used by drivers that don't provide their own (accelerated)
version.
+config FB_MACMODES
+ tristate
+ depends on FB
+ default n
+
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
@@ -323,6 +328,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES
help
Say Y if you want support with Open Firmware for your graphics
board.
@@ -334,6 +340,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES
help
This driver supports a frame buffer for the graphics adapter in the
Power Macintosh 7300 and others.
@@ -345,6 +352,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES
help
This driver supports a frame buffer for the "platinum" graphics
adapter in some Power Macintoshes.
@@ -356,6 +364,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES
help
This driver supports a frame buffer for the "valkyrie" graphics
adapter in some Power Macintoshes.
@@ -384,6 +393,7 @@
depends on (FB = y) && PCI
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
@@ -436,6 +446,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
@@ -753,6 +764,7 @@
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
select FB_TILEBLITTING
+ select FB_MACMODES if PPC_PMAC
---help---
Say Y here if you have a Matrox Millennium, Matrox Millennium II,
Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
@@ -892,6 +904,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC
help
Choose this option if you want to use an ATI Radeon graphics card as
a framebuffer device. There are both PCI and AGP versions. You
@@ -909,6 +922,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC_OF
help
Choose this option if you want to use an ATI Radeon graphics card as
a framebuffer device. There are both PCI and AGP versions. You
@@ -947,6 +961,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
Say Y if you have such a graphics board and read
@@ -962,6 +977,7 @@
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
+ select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have such a graphics board.
diff -Nru a/drivers/video/Makefile b/drivers/video/Makefile
--- a/drivers/video/Makefile 2005-03-12 23:22:36 +08:00
+++ b/drivers/video/Makefile 2005-03-14 06:55:07 +08:00
@@ -16,6 +16,7 @@
obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
obj-$(CONFIG_FB_SOFT_CURSOR) += softcursor.o
+obj-$(CONFIG_FB_MACMODES) += macmodes.o
# Hardware specific drivers go first
obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o
@@ -41,9 +42,9 @@
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
obj-$(CONFIG_FB_3DFX) += tdfxfb.o
-obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o
-obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o
-obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o
+obj-$(CONFIG_FB_CONTROL) += controlfb.o
+obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
+obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
obj-$(CONFIG_FB_CT65550) += chipsfb.o
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_S3TRIO) += S3triofb.o
@@ -61,7 +62,7 @@
obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
obj-$(CONFIG_FB_ACORN) += acornfb.o
obj-$(CONFIG_FB_ATARI) += atafb.o
-obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o
+obj-$(CONFIG_FB_MAC) += macfb.o
obj-$(CONFIG_FB_HGA) += hgafb.o
obj-$(CONFIG_FB_IGA) += igafb.o
obj-$(CONFIG_FB_APOLLO) += dnfb.o
diff -Nru a/drivers/video/macmodes.c b/drivers/video/macmodes.c
--- a/drivers/video/macmodes.c 2005-03-12 23:23:12 +08:00
+++ b/drivers/video/macmodes.c 2005-03-14 06:50:30 +08:00
@@ -19,6 +19,7 @@
#include <linux/errno.h>
#include <linux/fb.h>
#include <linux/string.h>
+#include <linux/module.h>
#include "macmodes.h"
@@ -281,7 +282,7 @@
var->vmode = mode->vmode;
return 0;
}
-
+EXPORT_SYMBOL(mac_vmode_to_var);
/**
* mac_var_to_vmode - convert var structure to MacOS vmode/cmode pair
@@ -326,7 +327,7 @@
}
return -EINVAL;
}
-
+EXPORT_SYMBOL(mac_var_to_vmode);
/**
* mac_map_monitor_sense - Convert monitor sense to vmode
@@ -348,7 +349,7 @@
break;
return map->vmode;
}
-
+EXPORT_SYMBOL(mac_map_monitor_sense);
/**
* mac_find_mode - find a video mode
@@ -384,3 +385,5 @@
return fb_find_mode(var, info, mode_option, db, dbsize,
&mac_modedb[DEFAULT_MODEDB_INDEX], default_bpp);
}
+EXPORT_SYMBOL(mac_find_mode);
+
prev parent reply other threads:[~2005-03-16 23:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-15 17:20 [PATCH] matroxfb compile error Joel Schopp
2005-03-16 23:17 ` Jon Smirl [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e4733910503161517735bc631@mail.gmail.com \
--to=jonsmirl@gmail.com \
--cc=akpm@osdl.org \
--cc=jschopp@austin.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.