messages from 2015-10-03 13:16:53 to 2015-10-03 14:28:44 UTC [more...]
[U-Boot] [PATCH V2 0/3] Fix fdt 'reg' parsing and unbreak few Exynos4 boards
2015-10-03 14:28 UTC (8+ messages)
` [U-Boot] [PATCH V3 0/4] "
` [U-Boot] [PATCH V3 1/4] fdtdec: fix parsing 'reg' property with zero value in '#size-cells'
[U-Boot] [PATCH v2 1/2] malloc_simple: Add Kconfig option for using only malloc_simple in the SPL
2015-10-03 14:28 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] malloc_simple: Add support for switching to DRAM heap
[U-Boot] [PATCH] spi: ignore set speed and mode if not available
2015-10-03 14:28 UTC (2+ messages)
[U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4
2015-10-03 14:28 UTC (22+ messages)
` [U-Boot] [PATCH V2 00/11] "
` [U-Boot] [PATCH V2 01/11] samsung: board/misc: check returned pointer for get_board_type() calls
` [U-Boot] [PATCH V2 02/11] s5p: cpu_info: print "cpu-model" if exists in dts
` [U-Boot] [PATCH V2 03/11] Peach-Pi: dts: add cpu-model string
` [U-Boot] [PATCH V2 05/11] dm: pmic: add s2mps11 PMIC I/O driver
` [U-Boot] [PATCH V2 06/11] dm: adc: add simple ADC uclass implementation
` [U-Boot] [PATCH V2 07/11] dm: adc: add Exynos54xx compatible ADC driver
` [U-Boot] [PATCH V2 08/11] Odroid-XU3: enable s2mps11 PMIC support
` [U-Boot] [PATCH V2 09/11] Exynos54xx: dts: add ADC node
` [U-Boot] [PATCH V2 10/11] Odroid-XU3: dts: enable ADC, with request for pre-reloc bind
` [U-Boot] [PATCH V2 11/11] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4
[Buildroot] [PATCH v3 1/3] skeleton: Clean up profile file
2015-10-03 14:27 UTC (5+ messages)
` [Buildroot] [PATCH v3 2/3] skeleton: Remove bash specific files
` [Buildroot] [PATCH v3 3/3] skeleton: Pretty fixes for /etc/profile
[U-Boot] [PATCH 0/2] Small Configuration tweaks for rockchip/firefly
2015-10-03 14:27 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] rockchip: Also load the initrd below 512M
` [U-Boot] [PATCH 2/2] rockchip: firefly: Save the environment on SD card
[U-Boot] [PATCH v3 0/4] Move tpm_tis_i2c to tpm_tis_infineon and convert last tpm driver to use DM_TPM
2015-10-03 14:27 UTC (9+ messages)
` [U-Boot] [PATCH v3 1/4] dm: tpm: Move tpm_tis_i2c to tpm_i2c_infineon
` [U-Boot] [PATCH v3 2/4] dm: tpm: Add Driver Model support for tpm_atmel_twi driver
` [U-Boot] [PATCH v3 3/4] dm: tpm: Remove every compilation switch for TPM driver model
` [U-Boot] [PATCH v3 4/4] dm: tpm: Every TPM drivers should depends on DM_TPM
[PATCH v2 3/5] net: dsa: complete dsa_switch_destroy
2015-10-03 14:26 UTC
BEQUEST NOTIFICATION
2015-10-03 14:27 UTC
[PATCH][resend] rc: gpio-ir-recv: allow flush space on idle
2015-10-03 14:27 UTC (6+ messages)
` [PATCH V2 0/2] rc: Add timeout support to gpio-ir-recv
` [PATCH V2 1/2] rc-core: define a default timeout for drivers
BEQUEST NOTIFICATION
2015-10-03 14:27 UTC
[U-Boot] [PATCH 1/7] sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER
2015-10-03 14:26 UTC (7+ messages)
` [U-Boot] [PATCH 2/7] sunxi: power: Make all voltages configurable through Kconfig
` [U-Boot] [PATCH 3/7] sunxi: power: Unify axp pmic function names
` [U-Boot] [PATCH 4/7] sunxi: power: Change A23/A33 VDD-SYS default from 1.2V to 1.1V
` [U-Boot] [PATCH 5/7] sunxi: power: Change A23/A33 aldo1 default voltage to 3.0V
` [U-Boot] [PATCH 6/7] sunxi: power: Use pmic_bus functions for axp152 / axp209 driver
` [U-Boot] [PATCH 7/7] sunxi: power: Drop protection against multiple calls from axp221 axp_init()
[PATCH v2 5/5] net: dsa: exit probe if no switch were found
2015-10-03 14:26 UTC
[PATCH v2 4/5] net: dsa: switch to devm_ calls and remove kfree calls
2015-10-03 14:26 UTC
[PATCH v2 2/5] net: dsa: add missing dsa_switch mdiobus remove
2015-10-03 14:26 UTC
[PATCH v2 1/5] net: dsa: add missing kfree on remove
2015-10-03 14:25 UTC
[PATCH v2 0/5] net: dsa: complete and fix the dsa unbinding
2015-10-03 14:25 UTC
[Buildroot] [PATCH] libnfs: Without native RPC use libtirpc
2015-10-03 14:25 UTC (2+ messages)
[PATCH 1/2] devicetree: add binding for generic mmio clocksource
2015-10-03 14:24 UTC (2+ messages)
` [PATCH 2/2] clocksource: mmio: add devicetree support
[Buildroot] [Buildroot website] Missing image(s?) files
2015-10-03 14:19 UTC (2+ messages)
[Buildroot] [git commit] package/swupdate: new package
2015-10-03 14:18 UTC
[Buildroot] [PATCH v3 1/4] package/rpm: bump to version 4.12.0.1
2015-10-03 14:15 UTC (2+ messages)
[U-Boot] [PATCH 1/2] gpio: tegra: remove unused type
2015-10-03 14:14 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] gpio: tegra: use named constants
[U-Boot] [PATCH] net: Increase the size of the net_boot_file_name buffer
2015-10-03 14:13 UTC (3+ messages)
[PATCH] kselftest: using built-in rule when delete file
2015-10-03 14:11 UTC (5+ messages)
` [PATCH] kselftest: replace $(RM) with rm -f command
[Buildroot] [PATCH 0/6 RFC] toolchain/external: use generic extract commands (branch yem/extract-cmds)
2015-10-03 14:06 UTC (3+ messages)
[Buildroot] board: add support for ARM Juno r1 Development Board
2015-10-03 14:03 UTC (2+ messages)
[PATCH] staging: wlan-ng: prism2sta: replace memcmp with ether_addr_equal
2015-10-03 14:01 UTC
[Buildroot] [PATCH] package/skeleton: add a startup script to wait for slow network interfaces
2015-10-03 14:01 UTC (4+ messages)
[Buildroot] [PATCH v3 0/4] Cleanup trailing slashed from FOO_SITE
2015-10-03 14:01 UTC (5+ messages)
` [Buildroot] [PATCH v3 2/4] pkg-generic: prevent _SITE URLs with a trailing slash
[PATCH 7/24] scripts/ver_linux: module-init-tools.patch
2015-10-03 13:54 UTC
[Outreachy kernel] Abridged summary of outreachy-kernel@googlegroups.com - 45 updates in 13 topics
2015-10-03 13:55 UTC (3+ messages)
[PATCH 1/3] net: dsa: Use devm_ prefixed allocations
2015-10-03 13:55 UTC (5+ messages)
[PATCH 24/24] ver_linux: proc-modules.patch
2015-10-03 13:53 UTC
[Buildroot] [PATCH v2] olimex_a20_olinuxino_lime2: new board
2015-10-03 13:53 UTC (3+ messages)
[PATCH 23/24] ver_linux: wireless-tools.patch
2015-10-03 13:51 UTC
[PATCH 22/24] ver_linux: udev.patch
2015-10-03 13:50 UTC
nvme header reshuffle V2
2015-10-03 13:51 UTC (4+ messages)
` [PATCH 1/3] nvme: add a local nvme.h header
` [PATCH 2/3] nvme: move hardware structures out of the uapi version of nvme.h
` [PATCH 3/3] nvme.h: add missing nvme_id_ctrl endianess annotations
[Buildroot] [git commit] olimex_a20_olinuxino_lime2: new board
2015-10-03 13:50 UTC
[PATCH 21/24] ver_linux: sh-utils.patch
2015-10-03 13:49 UTC
[PATCH 20/24] ver_linux: kbd_console-tools.patch
2015-10-03 13:47 UTC
[PATCH 19/24] ver_linux: net-tools.patch
2015-10-03 13:46 UTC
[PATCH 18/24] ver_linux: procps.patch
2015-10-03 13:45 UTC
[PATCH 17/24] ver_linux: libcpp.patch
2015-10-03 13:44 UTC
[PATCH 16/24] ver_linux: ldd.patch
2015-10-03 13:41 UTC
[PATCH 15/24] ver_linux: libc.patch
2015-10-03 13:40 UTC
nvme reset and probe updates V2
2015-10-03 13:39 UTC (9+ messages)
` [PATCH 1/8] NVMe: Reference count open namespaces
` [PATCH 2/8] NVMe: Namespace removal simplifications
` [PATCH 3/8] NVMe: Simplify device resume on io queue failure
` [PATCH 4/8] nvme: delete dev from dev_list in nvme_reset
` [PATCH 5/8] nvme: merge nvme_dev_reset into nvme_reset_failed_dev
` [PATCH 6/8] nvme: factor reset code into a common helper
` [PATCH 7/8] nvme: merge nvme_dev_start, nvme_dev_resume and nvme_async_probe
` [PATCH 8/8] nvme: properly handle partially initialized queues in nvme_create_io_queues
[PATCH 14/24] ver_linux: ppp.patch
2015-10-03 13:38 UTC
Dear: Account User
2015-10-03 12:53 UTC
simplify configfs attributes V2
2015-10-03 13:32 UTC (72+ messages)
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 01/23] configfs: add show and store methods to struct configfs_attribute
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 02/23] usb-gadget: use per-attribute show and store methods
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 03/23] usb-gadget/uvc: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 04/23] usb-gadget/f_hid: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 05/23] usb-gadget/f_acm: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 06/23] usb-gadget/ether: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 07/23] usb-gadget/f_loopback: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 08/23] usb-gadget/f_midi: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 09/23] usb-gadget/f_printer: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 10/23] usb-gadget/f_sourcesink: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 11/23] usb-gadget/f_mass_storage: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 12/23] usb-gadget/f_uac1: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 13/23] usb-gadget/f_uac2: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 14/23] usb-gadget/f_obex: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 15/23] usb-gadget/f_phonet: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 16/23] usb-gadget/f_serial: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 17/23] dlm: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 18/23] spear13xx_pcie_gadget: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 19/23] target: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 22/23] ocfs2/cluster: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 20/23] netconsole: "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 21/23] ocfs2/cluster: move locking into attribute "
` [Cluster-devel] "
` [Ocfs2-devel] "
` [PATCH 23/23] configfs: remove old API
` [Cluster-devel] "
` [Ocfs2-devel] "
[PATCH 13/24] ver_linux: quota-tools.patch
2015-10-03 13:37 UTC
[PATCH] staging: octeon: Switch unnecessary /** to /*
2015-10-03 13:35 UTC (4+ messages)
` [Outreachy kernel] "
[PATCH 12/24] ver_linux: pcmciautils.patch
2015-10-03 13:34 UTC
[Buildroot] [PATCH 0/2] Early boot fixes
2015-10-03 13:35 UTC (2+ messages)
[Buildroot] [git commit] skeleton: fix absence of /dev/shm on static, read-only systems
2015-10-03 13:34 UTC
[PATCH] staging: octeon: Add kernel-doc params description
2015-10-03 13:33 UTC
[Xenomai] xenomai-3 pull request
2015-10-03 13:33 UTC
[PATCH 11/24] ver_linux: xfsprogs.patch
2015-10-03 13:32 UTC
State of bitbake world, Failed tasks 2015-10-02
2015-10-03 13:33 UTC
[PATCH 10/24] ver_linux: reiserfsprogs.patch
2015-10-03 13:30 UTC
[PATCH 9/24] ver_linux: jfsutils.patch
2015-10-03 13:29 UTC
[Buildroot] [git commit] busybox: inittab: don't redirect output to /dev/null
2015-10-03 13:29 UTC
[Buildroot] [PATCH] links: bump to version 2.12
2015-10-03 13:28 UTC (2+ messages)
Horrible noise (audio) via DisplayPort [regression]
2015-10-03 13:28 UTC (2+ messages)
` PROBLEM: "
[Buildroot] [git commit] links: bump to version 2.12
2015-10-03 13:28 UTC
[Buildroot] [PATCHv2] valgrind: build for the right MIPS ISA revision level
2015-10-03 13:27 UTC (2+ messages)
[PATCH net-next] tcp/dccp: add SLAB_DESTROY_BY_RCU flag for request sockets
2015-10-03 13:27 UTC
[PATCH 1/1] irqchip/GICv2m: Add workaround for APM X-Gene GICv2m erratum
2015-10-03 13:26 UTC (3+ messages)
[PATCH 7/24] ver_linux: module-init-tools.patch
2015-10-03 13:26 UTC
[Buildroot] [git commit] valgrind: build for the right MIPS ISA revision level
2015-10-03 13:26 UTC
btrfs send -c fails saying "parent determination failed"
2015-10-03 13:18 UTC (2+ messages)
[Buildroot] [PATCH v3 1/4] package/kodi-pvr-stalker: Needs jsoncpp
2015-10-03 13:24 UTC (2+ messages)
[PATCH 8/24] ver_linux: e2fsprogs.patch
2015-10-03 13:23 UTC
[distros-debian-stretch test] 38119: tolerable FAIL
2015-10-03 13:22 UTC
[PATCH 7/24] ver_linux: module-init-tools.patch
2015-10-03 13:21 UTC
[Buildroot] [git commit] package/kodi-pvr-pctv: add jsoncpp reverse dependency
2015-10-03 13:20 UTC
[Buildroot] [git commit] package/kodi-pvr-filmon: add jsoncpp reverse dependency
2015-10-03 13:19 UTC
[Buildroot] [git commit] package/kodi-pvr-argustv: add jsoncpp reverse dependency
2015-10-03 13:19 UTC
[Buildroot] [git commit] package/kodi-pvr-stalker: Needs jsoncpp
2015-10-03 13:19 UTC
[PATCH 6/24] ver_linux: util-linux_mount.patch
2015-10-03 13:17 UTC
[Buildroot] [PATCH 1/2] dhcpcd: bump to version 6.9.3
2015-10-03 13:17 UTC (3+ messages)
` [Buildroot] [PATCH 2/2] dhcpcd: move libexecdir
[meta-fsl-arm-extra][PATCH 1/6] linux-boundary: Bump kernel version to 3.14.28
2015-10-03 13:16 UTC (4+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.