messages from 2019-07-19 04:21:57 to 2019-07-19 04:39:37 UTC [more...]
[PATCH AUTOSEL 5.2 001/171] drm/lima: handle shared irq case for lima_pp_bcast_irq_handler
2019-07-19 3:56 UTC (73+ messages)
` [PATCH AUTOSEL 5.2 049/171] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 5.2 051/171] PCI: endpoint: Allocate enough space for fixed size BAR
` [PATCH AUTOSEL 5.2 054/171] drm/virtio: Add memory barriers for capset cache
` [PATCH AUTOSEL 5.2 055/171] drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnect
` [PATCH AUTOSEL 5.2 059/171] drm/bridge: tfp410: fix use of cancel_delayed_work_sync
` [PATCH AUTOSEL 5.2 060/171] powerpc/pseries/mobility: prevent cpu hotplug during DT update
` [PATCH AUTOSEL 5.2 064/171] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks
` [PATCH AUTOSEL 5.2 065/171] iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 5.2 069/171] usb: gadget: Zero ffs_io_data
` [PATCH AUTOSEL 5.2 070/171] usb: dwc3: Fix core validation in probe, move after clocks are enabled
` [PATCH AUTOSEL 5.2 071/171] kvm: vmx: fix limit checking in get_vmx_mem_address()
` [PATCH AUTOSEL 5.2 075/171] kvm: vmx: segment limit check: use access length
` [PATCH AUTOSEL 5.2 076/171] drm/msm/adreno: Ensure that the zap shader region is big enough
` [PATCH AUTOSEL 5.2 077/171] powerpc/pci/of: Fix OF flags parsing for 64bit BARs
` [PATCH AUTOSEL 5.2 078/171] drm/msm: Depopulate platform on probe failure
` [PATCH AUTOSEL 5.2 080/171] staging: ks7010: Fix build error
` [PATCH AUTOSEL 5.2 082/171] PCI: sysfs: Ignore lockdep for remove attribute
` [PATCH AUTOSEL 5.2 084/171] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 5.2 089/171] PCI: xilinx-nwl: Fix Multi MSI data programming
` [PATCH AUTOSEL 5.2 090/171] iio: iio-utils: Fix possible incorrect mask calculation
` [PATCH AUTOSEL 5.2 091/171] dt-bindings: backlight: lm3630a: correct schema validation
` [PATCH AUTOSEL 5.2 092/171] powerpc/cacheflush: fix variable set but not used
` [PATCH AUTOSEL 5.2 096/171] recordmcount: Fix spurious mcount entries on powerpc
` [PATCH AUTOSEL 5.2 097/171] mfd: cros_ec: Register cros_ec_lid_angle driver when presented
` [PATCH AUTOSEL 5.2 099/171] mfd: core: Set fwnode for created devices
` [PATCH AUTOSEL 5.2 100/171] mfd: arizona: Fix undefined behavior
` [PATCH AUTOSEL 5.2 101/171] mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
` [PATCH AUTOSEL 5.2 106/171] powerpc/4xx/uic: clear pending interrupt after irq type/pol change
` [PATCH AUTOSEL 5.2 107/171] powerpc/mm: mark more tlb functions as __always_inline
` [PATCH AUTOSEL 5.2 108/171] RDMA/i40iw: Set queue pair state when being queried
` [PATCH AUTOSEL 5.2 111/171] IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE
` [PATCH AUTOSEL 5.2 112/171] powerpc/mm: Handle page table allocation failures
` [PATCH AUTOSEL 5.2 113/171] IB/ipoib: Add child to parent list only if device initialized
` [PATCH AUTOSEL 5.2 115/171] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
` [PATCH AUTOSEL 5.2 116/171] KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT
` [PATCH AUTOSEL 5.2 117/171] PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows
` [PATCH AUTOSEL 5.2 118/171] PCI: mobiveil: Fix the Class Code field
` [PATCH AUTOSEL 5.2 119/171] kallsyms: exclude kasan local symbols on s390
` [PATCH AUTOSEL 5.2 120/171] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers
` [PATCH AUTOSEL 5.2 121/171] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions
` [PATCH AUTOSEL 5.2 123/171] perf stat: Fix use-after-freed pointer detected by the smatch tool
` [PATCH AUTOSEL 5.2 124/171] rseq/selftests: Fix Thumb mode build failure on arm32
` [PATCH AUTOSEL 5.2 127/171] perf session: Fix potential NULL pointer dereference found by the smatch tool
` [PATCH AUTOSEL 5.2 131/171] RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
` [PATCH AUTOSEL 5.2 133/171] perf intel-bts: Fix potential NULL pointer dereference found by the smatch tool
` [PATCH AUTOSEL 5.2 135/171] nvme-pci: check for NULL return from pci_alloc_p2pmem()
` [PATCH AUTOSEL 5.2 136/171] nvme-pci: limit max_hw_sectors based on the DMA max mapping size
` [PATCH AUTOSEL 5.2 137/171] nvme-tcp: don't use sendpage for SLAB pages
` [PATCH AUTOSEL 5.2 138/171] io_uring: fix io_sq_thread_stop running in front of io_sq_thread
` [PATCH AUTOSEL 5.2 139/171] nvme-tcp: set the STABLE_WRITES flag when data digests are enabled
` [PATCH AUTOSEL 5.2 140/171] powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
` [PATCH AUTOSEL 5.2 141/171] powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
` [PATCH AUTOSEL 5.2 142/171] block: init flush rq ref count to 1
` [PATCH AUTOSEL 5.2 143/171] rds: Accept peer connection reject messages due to incompatible version
` [PATCH AUTOSEL 5.2 144/171] f2fs: fix to avoid long latency during umount
` [PATCH AUTOSEL 5.2 145/171] f2fs: avoid out-of-range memory access
` [PATCH AUTOSEL 5.2 146/171] mailbox: handle failed named mailbox channel request
` [PATCH AUTOSEL 5.2 147/171] dlm: check if workqueues are NULL before flushing/destroying
` [PATCH AUTOSEL 5.2 148/171] powerpc/eeh: Handle hugepages in ioremap space
` [PATCH AUTOSEL 5.2 150/171] net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn
` [PATCH AUTOSEL 5.2 152/171] block/bio-integrity: fix a memory leak bug
` [PATCH AUTOSEL 5.2 153/171] nvme: fix NULL deref for fabrics options
` [PATCH AUTOSEL 5.2 155/171] net/mlx5: E-Switch, Fix default encap mode
` [PATCH AUTOSEL 5.2 157/171] 9p: pass the correct prototype to read_cache_page
` [PATCH AUTOSEL 5.2 161/171] memcg, fsnotify: no oom-kill for remote memcg charging
` [PATCH AUTOSEL 5.2 163/171] proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
` [PATCH AUTOSEL 5.2 164/171] proc: use down_read_killable mmap_sem for /proc/pid/pagemap
` [PATCH AUTOSEL 5.2 165/171] proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
` [PATCH AUTOSEL 5.2 166/171] proc: use down_read_killable mmap_sem for /proc/pid/map_files
[PATCH AUTOSEL 5.1 001/141] drm/panel: simple: Fix panel_simple_dsi_probe
2019-07-19 4:02 UTC (68+ messages)
` [PATCH AUTOSEL 5.1 002/141] iio: adc: stm32-dfsdm: manage the get_irq error case
` [PATCH AUTOSEL 5.1 003/141] iio: adc: stm32-dfsdm: missing error case during probe
` [PATCH AUTOSEL 5.1 007/141] drm/bochs: Fix connector leak during driver unload
` [PATCH AUTOSEL 5.1 010/141] pinctrl: rockchip: fix leaked of_node references
` [PATCH AUTOSEL 5.1 013/141] drm/msm/a6xx: Check for ERR or NULL before iounmap
` [PATCH AUTOSEL 5.1 016/141] f2fs: fix to avoid deadloop if data_flush is on
` [PATCH AUTOSEL 5.1 018/141] drm/amd/display: Disable ABM before destroy ABM struct
` [PATCH AUTOSEL 5.1 020/141] drm/amdkfd: Fix sdma queue map issue
` [PATCH AUTOSEL 5.1 021/141] drm/edid: Fix a missing-check bug in drm_load_edid_firmware()
` [PATCH AUTOSEL 5.1 022/141] tools: PCI: Fix broken pcitest compilation
` [PATCH AUTOSEL 5.1 025/141] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
` [PATCH AUTOSEL 5.1 029/141] f2fs: Lower threshold for disable_cp_again
` [PATCH AUTOSEL 5.1 030/141] gpu: host1x: Increase maximum DMA segment size
` [PATCH AUTOSEL 5.1 032/141] drm/crc-debugfs: Also sprinkle irqrestore over early exits
` [PATCH AUTOSEL 5.1 036/141] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 5.1 043/141] powerpc/pseries/mobility: prevent cpu hotplug during DT update
` [PATCH AUTOSEL 5.1 045/141] drm/rockchip: Properly adjust to a true clock in adjusted_mode
` [PATCH AUTOSEL 5.1 047/141] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks
` [PATCH AUTOSEL 5.1 048/141] iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 5.1 052/141] usb: gadget: Zero ffs_io_data
` [PATCH AUTOSEL 5.1 054/141] usb: gadget: storage: Remove warning message
` [PATCH AUTOSEL 5.1 056/141] KVM: nVMX: Intercept VMWRITEs to GUEST_{CS,SS}_AR_BYTES
` [PATCH AUTOSEL 5.1 057/141] kvm: vmx: segment limit check: use access length
` [PATCH AUTOSEL 5.1 058/141] powerpc/pci/of: Fix OF flags parsing for 64bit BARs
` [PATCH AUTOSEL 5.1 059/141] drm/msm: Depopulate platform on probe failure
` [PATCH AUTOSEL 5.1 061/141] staging: ks7010: Fix build error
` [PATCH AUTOSEL 5.1 062/141] PCI: sysfs: Ignore lockdep for remove attribute
` [PATCH AUTOSEL 5.1 064/141] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 5.1 067/141] PCI: xilinx-nwl: Fix Multi MSI data programming
` [PATCH AUTOSEL 5.1 068/141] iio: iio-utils: Fix possible incorrect mask calculation
` [PATCH AUTOSEL 5.1 073/141] recordmcount: Fix spurious mcount entries on powerpc
` [PATCH AUTOSEL 5.1 076/141] mfd: arizona: Fix undefined behavior
` [PATCH AUTOSEL 5.1 077/141] mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
` [PATCH AUTOSEL 5.1 079/141] um: Silence lockdep complaint about mmap_sem
` [PATCH AUTOSEL 5.1 081/141] powerpc/4xx/uic: clear pending interrupt after irq type/pol change
` [PATCH AUTOSEL 5.1 082/141] RDMA/i40iw: Set queue pair state when being queried
` [PATCH AUTOSEL 5.1 085/141] IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE
` [PATCH AUTOSEL 5.1 087/141] IB/ipoib: Add child to parent list only if device initialized
` [PATCH AUTOSEL 5.1 089/141] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
` [PATCH AUTOSEL 5.1 090/141] KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT
` [PATCH AUTOSEL 5.1 091/141] PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows
` [PATCH AUTOSEL 5.1 092/141] PCI: mobiveil: Fix the Class Code field
` [PATCH AUTOSEL 5.1 094/141] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers
` [PATCH AUTOSEL 5.1 095/141] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions
` [PATCH AUTOSEL 5.1 101/141] perf map: Fix potential NULL pointer dereference found by smatch tool
` [PATCH AUTOSEL 5.1 102/141] perf annotate: Fix dereferencing freed memory found by the "
` [PATCH AUTOSEL 5.1 106/141] perf intel-bts: Fix potential NULL pointer dereference "
` [PATCH AUTOSEL 5.1 108/141] nvme-pci: check for NULL return from pci_alloc_p2pmem()
` [PATCH AUTOSEL 5.1 109/141] nvme-pci: limit max_hw_sectors based on the DMA max mapping size
` [PATCH AUTOSEL 5.1 110/141] nvme-tcp: don't use sendpage for SLAB pages
` [PATCH AUTOSEL 5.1 112/141] powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
` [PATCH AUTOSEL 5.1 113/141] block: init flush rq ref count to 1
` [PATCH AUTOSEL 5.1 114/141] rds: Accept peer connection reject messages due to incompatible version
` [PATCH AUTOSEL 5.1 115/141] f2fs: fix to avoid long latency during umount
` [PATCH AUTOSEL 5.1 116/141] f2fs: avoid out-of-range memory access
` [PATCH AUTOSEL 5.1 117/141] mailbox: handle failed named mailbox channel request
` [PATCH AUTOSEL 5.1 118/141] dlm: check if workqueues are NULL before flushing/destroying
` [PATCH AUTOSEL 5.1 121/141] net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn
` [PATCH AUTOSEL 5.1 123/141] block/bio-integrity: fix a memory leak bug
` [PATCH AUTOSEL 5.1 124/141] nvme: fix NULL deref for fabrics options
` [PATCH AUTOSEL 5.1 125/141] sh: prevent warnings when using iounmap
` [PATCH AUTOSEL 5.1 127/141] 9p: pass the correct prototype to read_cache_page
` [PATCH AUTOSEL 5.1 131/141] memcg, fsnotify: no oom-kill for remote memcg charging
` [PATCH AUTOSEL 5.1 133/141] proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
` [PATCH AUTOSEL 5.1 134/141] proc: use down_read_killable mmap_sem for /proc/pid/pagemap
` [PATCH AUTOSEL 5.1 136/141] proc: use down_read_killable mmap_sem for /proc/pid/map_files
[Qemu-devel] [PATCH qemu v3] spapr_pci: Advertise BAR reallocation capability
2019-07-19 4:37 UTC
[PATCH v2] nvme-pci: Support shared tags across queues for Apple 2018 controllers
2019-07-19 4:36 UTC (2+ messages)
HMM_MIRROR has less than useful help text
2019-07-19 4:34 UTC (3+ messages)
` [PATCH] mm/Kconfig: additional help text for HMM_MIRROR option
[v6,1/2] rtc/fsl: add FTM alarm driver as the wakeup source
2019-07-19 3:54 UTC (2+ messages)
` [v6,2/2] dt-bindings: rtc: add bindings for FlexTimer Module
[dpdk-dev] [PATCH] net/mlx5: correct spelling mistakes in comments
2019-07-19 4:31 UTC (2+ messages)
[dpdk-dev] [PATCH] net/mlx5: fix setting of item flags bitmap
2019-07-19 4:29 UTC (2+ messages)
Floppy ioctl range clamping fixes
2019-07-19 4:29 UTC
[Xen-devel] [PATCH 0/2] xen/gntdev: sanitize user interface handling
2019-07-19 4:06 UTC (4+ messages)
` [Xen-devel] [PATCH 1/2] xen/gntdev: replace global limit of mapped pages by limit per call
[dpdk-dev] [PATCH] net/mlx5: fix define of added tunnel layer bit
2019-07-19 4:28 UTC (2+ messages)
[PATCH] net: ethernet: mediatek: Add MT7628/88 SoC support
2019-07-19 4:06 UTC (3+ messages)
[PATCH AUTOSEL 4.19 001/101] drm/panel: simple: Fix panel_simple_dsi_probe
2019-07-19 4:07 UTC (39+ messages)
` [PATCH AUTOSEL 4.19 005/101] usb: core: hub: Disable hub-initiated U1/U2
` [PATCH AUTOSEL 4.19 012/101] drm/amd/display: Disable ABM before destroy ABM struct
` [PATCH AUTOSEL 4.19 014/101] drm/amdkfd: Fix sdma queue map issue
` [PATCH AUTOSEL 4.19 017/101] drm/bridge: tc358767: read display_props in get_modes()
` [PATCH AUTOSEL 4.19 018/101] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
` [PATCH AUTOSEL 4.19 024/101] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 4.19 026/101] drm/amd/display: Always allocate initial connector state state
` [PATCH AUTOSEL 4.19 028/101] phy: renesas: rcar-gen2: Fix memory leak at error paths
` [PATCH AUTOSEL 4.19 030/101] powerpc/pseries/mobility: prevent cpu hotplug during DT update
` [PATCH AUTOSEL 4.19 031/101] drm/rockchip: Properly adjust to a true clock in adjusted_mode
` [PATCH AUTOSEL 4.19 032/101] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks
` [PATCH AUTOSEL 4.19 035/101] usb: gadget: Zero ffs_io_data
` [PATCH AUTOSEL 4.19 036/101] usb: gadget: storage: Remove warning message
` [PATCH AUTOSEL 4.19 041/101] PCI: sysfs: Ignore lockdep for remove attribute
` [PATCH AUTOSEL 4.19 043/101] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 4.19 046/101] PCI: xilinx-nwl: Fix Multi MSI data programming
` [PATCH AUTOSEL 4.19 047/101] iio: iio-utils: Fix possible incorrect mask calculation
` [PATCH AUTOSEL 4.19 051/101] mfd: madera: Add missing of table registration
` [PATCH AUTOSEL 4.19 057/101] powerpc/4xx/uic: clear pending interrupt after irq type/pol change
` [PATCH AUTOSEL 4.19 058/101] RDMA/i40iw: Set queue pair state when being queried
` [PATCH AUTOSEL 4.19 061/101] IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE
` [PATCH AUTOSEL 4.19 062/101] powerpc/mm: Handle page table allocation failures
` [PATCH AUTOSEL 4.19 063/101] IB/ipoib: Add child to parent list only if device initialized
` [PATCH AUTOSEL 4.19 065/101] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
` [PATCH AUTOSEL 4.19 066/101] PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows
` [PATCH AUTOSEL 4.19 067/101] PCI: mobiveil: Fix the Class Code field
` [PATCH AUTOSEL 4.19 068/101] kallsyms: exclude kasan local symbols on s390
` [PATCH AUTOSEL 4.19 069/101] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers
` [PATCH AUTOSEL 4.19 070/101] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions
` [PATCH AUTOSEL 4.19 077/101] RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
` [PATCH AUTOSEL 4.19 079/101] powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
` [PATCH AUTOSEL 4.19 080/101] block: init flush rq ref count to 1
` [PATCH AUTOSEL 4.19 082/101] mailbox: handle failed named mailbox channel request
` [PATCH AUTOSEL 4.19 083/101] dlm: check if workqueues are NULL before flushing/destroying
` [PATCH AUTOSEL 4.19 084/101] powerpc/eeh: Handle hugepages in ioremap space
` [PATCH AUTOSEL 4.19 086/101] block/bio-integrity: fix a memory leak bug
` [PATCH AUTOSEL 4.19 092/101] memcg, fsnotify: no oom-kill for remote memcg charging
` [PATCH AUTOSEL 4.19 097/101] proc: use down_read_killable mmap_sem for /proc/pid/map_files
[RFC PATCH v2 00/19] Try to reduce lock contention on the SMMUv3 command queue
2019-07-19 4:25 UTC (2+ messages)
[Buildroot] [Bug 12031] New: Build of cups-filters fails while linking, apparently due to missing libiconv
2019-07-19 4:25 UTC (2+ messages)
` [Buildroot] [Bug 12031] "
[dpdk-dev] [PATCH] net/mlx4: correct spelling mistake in comment
2019-07-19 4:25 UTC (2+ messages)
[PATCH] USB: serial: option: Add support for ZTE MF871A
2019-07-19 4:09 UTC (5+ messages)
` [PATCH v2] "
[PATCH AUTOSEL 4.14 01/60] drm/panel: simple: Fix panel_simple_dsi_probe
2019-07-19 4:10 UTC (8+ messages)
` [PATCH AUTOSEL 4.14 04/60] pinctrl: rockchip: fix leaked of_node references
` [PATCH AUTOSEL 4.14 06/60] drm/edid: Fix a missing-check bug in drm_load_edid_firmware()
` [PATCH AUTOSEL 4.14 07/60] PCI: Return error if cannot probe VF
` [PATCH AUTOSEL 4.14 09/60] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
` [PATCH AUTOSEL 4.14 10/60] drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry
` [PATCH AUTOSEL 4.14 13/60] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 4.14 15/60] drm/virtio: Add memory barriers for capset cache
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.