messages from 2019-12-20 14:26:05 to 2019-12-20 14:37:01 UTC [more...]
[PULL 00/12] target-arm queue
2019-12-20 14:26 UTC (9+ messages)
` [PULL 02/12] target/arm: Abstract the generic timer frequency
` [PULL 03/12] target/arm: Prepare generic timer for per-platform CNTFRQ
` [PULL 04/12] ast2600: Configure CNTFRQ at 1125MHz
` [PULL 05/12] hw/arm/smmuv3: Apply address mask to linear strtab base address
` [PULL 06/12] hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK value
` [PULL 07/12] hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZE
` [PULL 08/12] hw/arm/smmuv3: Align stream table base address to table size
` [PULL 09/12] hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro
[PATCH AUTOSEL 4.19 01/34] nvme_fc: add module to ops template to allow module references
2019-12-20 14:34 UTC (42+ messages)
` [PATCH AUTOSEL 4.19 02/34] nvme-fc: fix double-free scenarios on hw queues
` [PATCH AUTOSEL 4.19 03/34] drm/amdgpu: add check before enabling/disabling broadcast mode
` [PATCH AUTOSEL 4.19 04/34] drm/amdgpu: add cache flush workaround to gfx8 emit_fence
` [PATCH AUTOSEL 4.19 05/34] drm/amd/display: Fixed kernel panic when booting with DP-to-HDMI dongle
` [PATCH AUTOSEL 4.19 06/34] iio: adc: max9611: Fix too short conversion time delay
` [PATCH AUTOSEL 4.19 07/34] PM / devfreq: Fix devfreq_notifier_call returning errno
` [PATCH AUTOSEL 4.19 08/34] PM / devfreq: Set scaling_max_freq to max on OPP notifier error
` [PATCH AUTOSEL 4.19 09/34] PM / devfreq: Don't fail devfreq_dev_release if not in list
` [PATCH AUTOSEL 4.19 10/34] afs: Fix afs_find_server lookups for ipv4 peers
` [PATCH AUTOSEL 4.19 11/34] afs: Fix SELinux setting security label on /afs
` [PATCH AUTOSEL 4.19 12/34] RDMA/cma: add missed unregister_pernet_subsys in init failure
` [PATCH AUTOSEL 4.19 13/34] rxe: correctly calculate iCRC for unaligned payloads
` [PATCH AUTOSEL 4.19 14/34] scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func
` [PATCH AUTOSEL 4.19 15/34] scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
` [PATCH AUTOSEL 4.19 16/34] scsi: qla2xxx: Don't call qlt_async_event twice
` [PATCH AUTOSEL 4.19 17/34] scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
` [PATCH AUTOSEL 4.19 18/34] scsi: qla2xxx: Configure local loop for N2N target
` [PATCH AUTOSEL 4.19 19/34] scsi: qla2xxx: Send Notify ACK after N2N PLOGI
` [PATCH AUTOSEL 4.19 20/34] scsi: qla2xxx: Ignore PORT UPDATE "
` [PATCH AUTOSEL 4.19 21/34] scsi: iscsi: qla4xxx: fix double free in probe
` [PATCH AUTOSEL 4.19 22/34] scsi: libsas: stop discovering if oob mode is disconnected
` [PATCH AUTOSEL 4.19 23/34] drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit
` [PATCH AUTOSEL 4.19 24/34] usb: gadget: fix wrong endpoint desc
` [PATCH AUTOSEL 4.19 25/34] net: make socket read/write_iter() honor IOCB_NOWAIT
` [PATCH AUTOSEL 4.19 26/34] afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP
` [PATCH AUTOSEL 4.19 27/34] md: raid1: check rdev before reference in raid1_sync_request func
` [PATCH AUTOSEL 4.19 28/34] s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits
` [PATCH AUTOSEL 4.19 29/34] s390/cpum_sf: Avoid SBD overflow condition in irq handler
` [PATCH AUTOSEL 4.19 30/34] IB/mlx4: Follow mirror sequence of device add during device removal
` [PATCH AUTOSEL 4.19 31/34] IB/mlx5: Fix steering rule of drop and count
` [PATCH AUTOSEL 4.19 32/34] xen-blkback: prevent premature module unload
` [Xen-devel] "
` [PATCH AUTOSEL 4.19 33/34] xen/balloon: fix ballooned page accounting without hotplug enabled
` [Xen-devel] "
` [PATCH AUTOSEL 4.19 34/34] PM / hibernate: memory_bm_find_bit(): Tighten node optimisation
[tobetter-linux:odroidxu4-5.4.y 5/16] ERROR: "phys_mem_access_prot" [drivers/char/exynos-gpiomem.ko] undefined!
2019-12-20 14:36 UTC
[RFC v4 PATCH 00/49] Initial support of multi-process qemu
2019-12-20 14:14 UTC (13+ messages)
` [RFC v4 PATCH 00/49] Initial support of multi-process qemu - status update
[Xen-devel] [PATCH 0/6] x86: IRQ handling adjustments
2019-12-20 14:34 UTC (3+ messages)
` [Xen-devel] [PATCH 5/6] x86/IRQ: re-use legacy vector ranges on APs
[RFC][PATCH 0/4] sched: Optimizations to sched_class processing
2019-12-20 14:34 UTC (7+ messages)
` [RFC][PATCH 1/4] sched: Force the address order of each sched class descriptor
[PATCH 1/5] KVM: arm64: Document PV-lock interface
2019-12-20 14:32 UTC (3+ messages)
[PATCH AUTOSEL 5.4 01/52] drm/mcde: dsi: Fix invalid pointer dereference if panel cannot be found
2019-12-20 14:29 UTC (69+ messages)
` [PATCH AUTOSEL 5.4 02/52] nvme_fc: add module to ops template to allow module references
` [PATCH AUTOSEL 5.4 03/52] nvme-fc: fix double-free scenarios on hw queues
` [PATCH AUTOSEL 5.4 04/52] drm/amdgpu: add check before enabling/disabling broadcast mode
` [PATCH AUTOSEL 5.4 05/52] drm/amdgpu: add header line for power profile on Arcturus
` [PATCH AUTOSEL 5.4 06/52] drm/amdgpu: add cache flush workaround to gfx8 emit_fence
` [PATCH AUTOSEL 5.4 07/52] drm/amd/display: Map DSC resources 1-to-1 if numbers of OPPs and DSCs are equal
` [PATCH AUTOSEL 5.4 08/52] drm/amd/display: Fixed kernel panic when booting with DP-to-HDMI dongle
` [PATCH AUTOSEL 5.4 09/52] drm/amd/display: Change the delay time before enabling FEC
` [PATCH AUTOSEL 5.4 10/52] drm/amd/display: Reset steer fifo before unblanking the stream
` [PATCH AUTOSEL 5.4 11/52] drm/amd/display: update dispclk and dppclk vco frequency
` [PATCH AUTOSEL 5.4 12/52] nvme/pci: Fix write and poll queue types
` [PATCH AUTOSEL 5.4 13/52] nvme/pci: Fix read queue count
` [PATCH AUTOSEL 5.4 15/52] iio: adc: max9611: Fix too short conversion time delay
` [PATCH AUTOSEL 5.4 19/52] afs: Fix afs_find_server lookups for ipv4 peers
` [PATCH AUTOSEL 5.4 22/52] rxe: correctly calculate iCRC for unaligned payloads
` [PATCH AUTOSEL 5.4 23/52] scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func
` [PATCH AUTOSEL 5.4 24/52] scsi: qla2xxx: Use explicit LOGO in target mode
` [PATCH AUTOSEL 5.4 25/52] scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
` [PATCH AUTOSEL 5.4 26/52] scsi: qla2xxx: Don't call qlt_async_event twice
` [PATCH AUTOSEL 5.4 27/52] scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
` [PATCH AUTOSEL 5.4 28/52] scsi: qla2xxx: Configure local loop for N2N target
` [PATCH AUTOSEL 5.4 29/52] scsi: qla2xxx: Send Notify ACK after N2N PLOGI
` [PATCH AUTOSEL 5.4 30/52] scsi: qla2xxx: Don't defer relogin unconditonally
` [PATCH AUTOSEL 5.4 31/52] scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
` [PATCH AUTOSEL 5.4 32/52] scsi: iscsi: qla4xxx: fix double free in probe
` [PATCH AUTOSEL 5.4 33/52] scsi: libsas: stop discovering if oob mode is disconnected
` [PATCH AUTOSEL 5.4 34/52] scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
` [PATCH AUTOSEL 5.4 35/52] staging/wlan-ng: add CRC32 dependency in Kconfig
` [PATCH AUTOSEL 5.4 36/52] drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit
` [PATCH AUTOSEL 5.4 37/52] drm/nouveau: Fix drm-core using atomic code-paths on pre-nv50 hardware
` [PATCH AUTOSEL 5.4 38/52] drm/nouveau/kms/nv50-: fix panel scaling
` [PATCH AUTOSEL 5.4 39/52] usb: gadget: fix wrong endpoint desc
` [PATCH AUTOSEL 5.4 40/52] net: make socket read/write_iter() honor IOCB_NOWAIT
` [PATCH AUTOSEL 5.4 41/52] afs: Fix mountpoint parsing
` [PATCH AUTOSEL 5.4 42/52] afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP
` [PATCH AUTOSEL 5.4 43/52] raid5: need to set STRIPE_HANDLE for batch head
` [PATCH AUTOSEL 5.4 44/52] md: raid1: check rdev before reference in raid1_sync_request func
` [PATCH AUTOSEL 5.4 45/52] s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits
` [PATCH AUTOSEL 5.4 46/52] s390/cpum_sf: Avoid SBD overflow condition in irq handler
` [PATCH AUTOSEL 5.4 47/52] RDMA/counter: Prevent auto-binding a QP which are not tracked with res
` [PATCH AUTOSEL 5.4 48/52] IB/mlx4: Follow mirror sequence of device add during device removal
` [PATCH AUTOSEL 5.4 49/52] IB/mlx5: Fix steering rule of drop and count
` [PATCH AUTOSEL 5.4 50/52] xen-blkback: prevent premature module unload
` [Xen-devel] "
` [Xen-devel] [PATCH AUTOSEL 5.4 51/52] xen/balloon: fix ballooned page accounting without hotplug enabled
` "
` [PATCH AUTOSEL 5.4 52/52] PM / hibernate: memory_bm_find_bit(): Tighten node optimisation
[PATCH v2 00/18] arm64: KVM: add SPE profiling support
2019-12-20 14:30 UTC (48+ messages)
` [PATCH v2 01/18] dt-bindings: ARM SPE: highlight the need for PPI partitions on heterogeneous systems
` [PATCH v2 02/18] arm64: KVM: reset E2PB correctly in MDCR_EL2 when exiting the guest(VHE)
` [PATCH v2 03/18] arm64: KVM: define SPE data structure for each vcpu
` [PATCH v2 04/18] arm64: KVM: add SPE system registers to sys_reg_descs
` [PATCH v2 05/18] arm64: KVM/VHE: enable the use PMSCR_EL12 on VHE systems
` [PATCH v2 06/18] arm64: KVM: split debug save restore across vm/traps activation
` [PATCH v2 07/18] arm64: KVM/debug: drop pmscr_el1 and use sys_regs[PMSCR_EL1] in kvm_cpu_context
` [PATCH v2 08/18] arm64: KVM: add support to save/restore SPE profiling buffer controls
` [PATCH v2 09/18] arm64: KVM: enable conditional save/restore full "
` [PATCH v2 10/18] arm64: KVM/debug: use EL1&0 stage 1 translation regime
` [PATCH v2 11/18] KVM: arm64: don't trap Statistical Profiling controls to EL2
` [PATCH v2 12/18] KVM: arm64: add a new vcpu device control group for SPEv1
` [PATCH v2 13/18] perf: arm_spe: Add KVM structure for obtaining IRQ info
` [PATCH v2 14/18] KVM: arm64: spe: Provide guest virtual interrupts for SPE
` [PATCH v2 15/18] perf: arm_spe: Handle guest/host exclusion flags
` [PATCH v2 16/18] KVM: arm64: enable SPE support
` [PATCH v2 17/18, KVMTOOL] update_headers: Sync kvm UAPI headers with linux v5.5-rc2
` [PATCH v2 18/18, KVMTOOL] kvm: add a vcpu feature for SPEv1 support
[PATCH v2 0/2] openat2: minor uapi cleanups
2019-12-20 14:33 UTC (3+ messages)
` [PATCH v2 1/2] openat2: drop open_how->__padding field
[PATCH v2 0/5] Add the missing remoteprocs on MSM8998
2019-12-20 14:33 UTC (4+ messages)
` [PATCH v2 5/5] arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes
[PATCH 00/10] Add Raspberry Pi USB support
2019-12-20 14:32 UTC (11+ messages)
` [PATCH 01/10] usb: Make timeout unit clear
` [PATCH 02/10] of: Add of_bus_n_xxx_cells()
` [PATCH 03/10] device: Introduce dma_offset
` [PATCH 04/10] of: Read dma_offset from device tree
` [PATCH 05/10] usb: Add usbroothubdes.h
` [PATCH 06/10] regulator: add function to get regulator by its name
` [PATCH 07/10] rpi: Enable USB Power domain during startup
` [PATCH 08/10] usb: Forward error code from usb_set_configuration
` [PATCH 09/10] usb: Add dwc2 host driver
` [PATCH 10/10] ARM: rpi_defconfig: Enable networking support
[PATCH v5 0/2] virtio: make seg_max virtqueue size dependent
2019-12-20 14:09 UTC (2+ messages)
` [PATCH v5 1/2] "
[PATCH v3 0/4] Renesas R8A77980 CPG/MSSR RPC clock support
2019-12-20 14:31 UTC (4+ messages)
` [PATCH] clk: renesas: rcar-gen3: allow changing the RPC[D2] clocks
[PATCH 1/2] bitbake: prserv/serv: Use with while reading pidfile
2019-12-20 14:23 UTC (2+ messages)
` [PATCH 2/2] bitbake-layers: Keep loglevel in colored logger
[patch 1/4] fix: spi_master_read_rt()
2019-12-20 14:30 UTC (2+ messages)
[Xen-devel] [PATCH] tools: bump library version numbers
2019-12-20 14:29 UTC (3+ messages)
[PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
2019-12-20 14:30 UTC (2+ messages)
[Buildroot] [PATCH 1/2] package/snappy: add snappy.pc
2019-12-20 14:28 UTC (6+ messages)
` [Buildroot] [PATCH 2/2] package/wireshark: fix static build with snappy
[dpdk-dev] [PATCH] examples/l2fwd-event: fix event device config
2019-12-20 14:27 UTC
[PATCH v5 0/2] virtio: make seg_max virtqueue size dependent
2019-12-20 14:04 UTC (2+ messages)
` [PATCH v5 2/2] tests: add virtio-scsi and virtio-blk seg_max_adjust test
[Xen-devel] [PATCH] x86/EPT: adjustments for redundant function arguments
2019-12-20 14:26 UTC (2+ messages)
[PATCH 0/2] Fix two above-47bit hint address vs. THP bugs
2019-12-20 14:25 UTC (2+ messages)
` [PATCH 1/2] thp: Fix conflict of above-47bit hint address and PMD alignment
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.