All of lore.kernel.org
 help / color / mirror / Atom feed
 messages from 2025-08-04 00:27:10 to 2025-08-04 00:36:02 UTC [more...]

[PATCH AUTOSEL 6.6 01/59] usb: xhci: print xhci->xhc_state when queue_command failed
 2025-08-04  0:33 UTC  (41+ messages)
` [PATCH AUTOSEL 6.6 02/59] platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
` [PATCH AUTOSEL 6.6 03/59] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.6 04/59] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.6 05/59] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.6 06/59] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.6 07/59] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.6 08/59] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.6 09/59] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.6 10/59] soc: qcom: rpmh-rsc: Add RSC version 4 support
` [PATCH AUTOSEL 6.6 11/59] ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
` [PATCH AUTOSEL 6.6 12/59] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.6 13/59] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.6 14/59] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.6 16/59] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.6 18/59] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.6 19/59] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.6 20/59] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.6 21/59] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.6 22/59] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.6 24/59] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.6 25/59] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.6 26/59] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.6 27/59] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.6 28/59] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.6 29/59] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.6 30/59] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.6 31/59] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.6 32/59] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.6 33/59] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.6 34/59] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.6 35/59] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.6 36/59] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.6 37/59] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.6 38/59] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.6 39/59] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.6 40/59] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.6 41/59] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.6 42/59] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.6 43/59] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.6 44/59] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4

[PATCH AUTOSEL 6.16 01/85] usb: xhci: print xhci->xhc_state when queue_command failed
 2025-08-04  0:23 UTC  (18+ messages)
` [PATCH AUTOSEL 6.16 26/85] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 6.16 28/85] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 6.16 35/85] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.16 72/85] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.16 73/85] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.16 75/85] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.16 76/85] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.16 77/85] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.16 78/85] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.16 79/85] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.16 80/85] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.16 81/85] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.16 82/85] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.16 83/85] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.16 84/85] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.16 85/85] ASoC: qcom: use drvdata instead of component to keep id

[PATCH AUTOSEL 6.12 01/69] usb: xhci: print xhci->xhc_state when queue_command failed
 2025-08-04  0:31 UTC  (66+ messages)
` [PATCH AUTOSEL 6.12 02/69] platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
` [PATCH AUTOSEL 6.12 03/69] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.12 04/69] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.12 05/69] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.12 06/69] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.12 07/69] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.12 08/69] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.12 09/69] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.12 10/69] firmware: qcom: scm: initialize tzmem before marking SCM as available
` [PATCH AUTOSEL 6.12 11/69] soc: qcom: rpmh-rsc: Add RSC version 4 support
` [PATCH AUTOSEL 6.12 12/69] ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
` [PATCH AUTOSEL 6.12 13/69] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.12 14/69] usb: typec: tcpm/tcpci_maxim: fix irq wake usage
` [PATCH AUTOSEL 6.12 15/69] pmdomain: ti: Select PM_GENERIC_DOMAINS
` [PATCH AUTOSEL 6.12 16/69] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.12 17/69] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.12 18/69] cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
` [PATCH AUTOSEL 6.12 20/69] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.12 22/69] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.12 23/69] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.12 24/69] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.12 25/69] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.12 26/69] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.12 27/69] mfd: tps6594: Add TI TPS652G1 support
` [PATCH AUTOSEL 6.12 29/69] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.12 30/69] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.12 31/69] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.12 32/69] firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
` [PATCH AUTOSEL 6.12 33/69] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.12 34/69] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.12 35/69] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.12 36/69] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.12 37/69] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.12 38/69] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.12 39/69] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.12 40/69] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.12 41/69] selftests: vDSO: vdso_test_getrandom: Always print TAP header
` [PATCH AUTOSEL 6.12 42/69] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.12 43/69] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.12 44/69] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.12 45/69] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.12 46/69] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.12 47/69] platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
` [PATCH AUTOSEL 6.12 48/69] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.12 49/69] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.12 50/69] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.12 51/69] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.12 52/69] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.12 53/69] ASoC: SOF: topology: Parse the dapm_widget_tokens in case of DSPless mode
` [PATCH AUTOSEL 6.12 54/69] tty: serial: fix print format specifiers
` [PATCH AUTOSEL 6.12 55/69] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.12 56/69] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.12 57/69] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.12 58/69] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.12 59/69] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.12 60/69] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.12 61/69] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.12 62/69] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.12 63/69] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.12 64/69] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.12 65/69] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.12 66/69] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.12 67/69] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.12 68/69] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.12 69/69] ASoC: qcom: use drvdata instead of component to keep id

[PATCH AUTOSEL 6.15 01/80] usb: xhci: print xhci->xhc_state when queue_command failed
 2025-08-04  0:27 UTC  (76+ messages)
` [PATCH AUTOSEL 6.15 02/80] staging: gpib: Add init response codes for new ni-usb-hs+
` [PATCH AUTOSEL 6.15 03/80] platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
` [PATCH AUTOSEL 6.15 04/80] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.15 05/80] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.15 06/80] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.15 07/80] bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
` [PATCH AUTOSEL 6.15 08/80] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.15 09/80] bus: mhi: host: pci_generic: Disable runtime PM for QDU100
` [PATCH AUTOSEL 6.15 10/80] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.15 11/80] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.15 12/80] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.15 13/80] firmware: qcom: scm: initialize tzmem before marking SCM as available
` [PATCH AUTOSEL 6.15 14/80] soc: qcom: rpmh-rsc: Add RSC version 4 support
` [PATCH AUTOSEL 6.15 15/80] ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
` [PATCH AUTOSEL 6.15 16/80] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.15 17/80] binder: Fix selftest page indexing
` [PATCH AUTOSEL 6.15 18/80] gpio: loongson-64bit: Extend GPIO irq support
` [PATCH AUTOSEL 6.15 19/80] usb: typec: ucsi: Add poll_cci operation to cros_ec_ucsi
` [PATCH AUTOSEL 6.15 20/80] usb: typec: tcpm/tcpci_maxim: fix irq wake usage
` [PATCH AUTOSEL 6.15 21/80] pmdomain: ti: Select PM_GENERIC_DOMAINS
` [PATCH AUTOSEL 6.15 22/80] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.15 23/80] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.15 24/80] cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
` [PATCH AUTOSEL 6.15 26/80] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.15 28/80] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.15 29/80] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.15 30/80] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.15 31/80] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.15 32/80] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.15 33/80] mfd: tps6594: Add TI TPS652G1 support
` [PATCH AUTOSEL 6.15 35/80] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.15 36/80] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.15 37/80] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.15 38/80] firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
` [PATCH AUTOSEL 6.15 39/80] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.15 40/80] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.15 41/80] ALSA: hda: add MODULE_FIRMWARE for cs35l41/cs35l56
` [PATCH AUTOSEL 6.15 42/80] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.15 43/80] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.15 44/80] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.15 45/80] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.15 46/80] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.15 47/80] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.15 48/80] irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
` [PATCH AUTOSEL 6.15 49/80] selftests: vDSO: vdso_test_getrandom: Always print TAP header
` [PATCH AUTOSEL 6.15 50/80] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.15 51/80] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.15 52/80] ASoC: SDCA: Add flag for unused IRQs
` [PATCH AUTOSEL 6.15 53/80] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.15 54/80] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.15 55/80] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.15 56/80] platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
` [PATCH AUTOSEL 6.15 57/80] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.15 58/80] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.15 59/80] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.15 60/80] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.15 61/80] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.15 62/80] irqchip/mips-gic: Allow forced affinity
` [PATCH AUTOSEL 6.15 63/80] ASoC: SOF: topology: Parse the dapm_widget_tokens in case of DSPless mode
` [PATCH AUTOSEL 6.15 64/80] tty: serial: fix print format specifiers
` [PATCH AUTOSEL 6.15 65/80] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.15 66/80] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.15 67/80] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.15 68/80] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.15 70/80] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.15 71/80] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.15 72/80] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.15 73/80] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.15 74/80] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.15 75/80] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.15 76/80] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.15 77/80] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.15 78/80] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.15 79/80] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.15 80/80] ASoC: qcom: use drvdata instead of component to keep id


This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.